Self Loading Concrete Mixer Truck

1. Self Loading Concrete Mixer Truck Abstract: The self loading concrete mixer truck has self loading, weighing, mixing, transport and discharging. Cute body and four wheel drive makes it unbeatable in mountain roads construction. What are its advantages and how to operate it? Welcome to read this page. The Advantages of Self Loading Concrete Mixer For construction, good concrete quality, high production efficiency and low labor cost will be an ideal situation. The self loading concrete mixer is such a machine. It has self loading, weighing, mixing and discharging in one. Therefore, it has been favored by more and more customers. Good Concrete Quality The self loading concrete mixer truck is equipped with an automatic weighing system, and the amount of each raw material can be controlled within minimum error. At the same time, with strong mixing technology, we can ensure the concrete quality in line with the standards for those projects like house building and roads construction. High Production Efficiency For small projects, manual mixing or traditional concrete mixer will be two ways to get concrete. They are of low efficiency and low flexibility. The hydraulic shovel of the self mixing concrete truck can automatically load the material and the large-capacity water tank can store a large amount of mixing water at one time. On average, one batch of concrete only needs 12-15

2. minutes. Every batch is 1-6.5 m3/h. Unloading while walking is also very convenient for the road, slop protection and ground hardening projects. Low Labor Cost For the traditional concrete mixer, we always reply on the labors or other machines. With this self loading mixer, it can save the cost of purchasing loader and concrete truck. In addition, two workers are enough: one is to operate the machine, one is to level the concrete in the projects. , This efficient and cost-saving concrete production is ideal for time-critical projects. How to Save Fuel for Self Loading Concrete Mixer Truck Good maintenance of the self loading concrete mixer truck can save fuel consumption and keep good performance of the engine. According to statistics, the fuel consumption of poorly maintained engines will increase by 10%-20%. The self loading concrete mixer owner should go to the auto repair shop for routine maintenance, such as checking tire pressure, four-wheel alignment, checking the filter, etc. In addition, choose the oil with the lowest viscosity, because the greater the viscosity, the greater the friction and the greater the fuel consumption. The self mixing concrete truck should avoid prolonged idling operation. The fuel consumption during the idling operation is much greater than the fuel consumption during normal driving. It is best to turn off the self mixing concrete truck when it is no longer in use. When it starts working, it can drive at low speed for a few minutes. Try to avoid sudden braking. The most fuel-efficient driving mode is soft and smooth. In the starting phase, try to avoid stepping on the accelerator. The correct method is to accelerate smoothly, and after reaching a certain speed, try to maintain a constant speed. Any vehicle has its own economic speed. Keeping close to the economic speed is the most fuel-efficient way for he self loading mobile concrete mixer. Generally speaking, when driving at high speed, the resistance of the self loading concrete mixer truck is greatly increased (mainly air resistance). According to statistics, when the vehicle speed is increased to 110-120 km/h, the fuel consumption will increase by 25%. How to Operate Self Loading Mobile Concrete Mixer The self loading mobile concrete mixer is a special for concrete production and transportation. Improper operation of the self loading concrete mixer will cause overturning and excessive wear of accessories. In addition to unnecessary economic losses, it may even cause more damage. To

3. drive it well, there are some tips: 1. After the engine is started, the operator should let the mixing drum run at low speed for about 10 minutes, so that the hydraulic oil temperature can rise above 20°C before it can work. 2. Before loading, the mixing drum should be reversed to ensure that the water and debris in the hopper are discharged, so as to ensure the quality of the concrete and the construction quality. 3. When transporting concrete, ensure that the shovel bucket is firmly placed to prevent it from swinging due to looseness, injuring pedestrians or affecting the normal operation of other vehicles. 4. The time for transporting concrete should not exceed the time specified by the concrete mixing plant. transportation of concrete, the mixing drum shall not be stopped for a long time to prevent segregation of the concrete. The driver of the self loading mixer machine should always observe condition, and report to the dispatching room if any abnormality is found. 5. When there is concrete in the mixing drum, the self loading concrete mixer truck can’t shall not stay there for over 1 hour. 6. The slump of the transported concrete During the the concrete shall not be less than 8cm. The whole process from mixing to the discharging must not exceed 2 hours when the temperature is high, and it must not exceed 2.5 hours when the temperature is low in rainy weather.