1 / 28

I-V Characteristics of pn Junction Diodes: Breakdown Mechanism and Charge Control

This chapter discusses the I-V characteristics of pn junction diodes, including the dominant breakdown mechanisms and the effect of charge control. Topics covered include tunneling, avalanching, Zener process, thermal generation, high-level injection, series resistance, and minority-carrier charge storage.

dmarsh
Download Presentation

I-V Characteristics of pn Junction Diodes: Breakdown Mechanism and Charge Control

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 6 pn Junction Diodes: I-V Characteristics Dominant breakdown mechanism is tunneling Empirical Observations of VBR • VBR decreases with increasing N, • VBR decreases with decreasing EG. • VBR : breakdown voltage

  2. Chapter 6 pn Junction Diodes: I-V Characteristics Breakdown Voltage, VBR • If the reverse bias voltage (–VA) is so large that the peak electric field exceeds a critical value ECR, then the junction will “break down” and large reverse current will flow. • At breakdown, VA=–VBR • Thus, the reverse bias at which breakdown occurs is

  3. Chapter 6 pn Junction Diodes: I-V Characteristics Breakdown Mechanism: Avalanching High E-field: High energy, enabling impact ionization which causing avalanche, at doping level N < 1018 cm–3 Small E-field: • ECR : critical electric field in the depletion region Low energy, causing lattice vibration and localized heating only

  4. Chapter 6 pn Junction Diodes: I-V Characteristics Breakdown Mechanism: Zener Process • Zener process is the tunneling mechanism in a reverse-biased diode. • Energy barrier is higher than the kinetic energy of the particle. • The particle energy remains constant during the tunneling process. • Barrier must be thin  dominant breakdown mechanism when both junction sides are heavily doped. • Typically, Zener process dominates when VBR < 4.5V in Si at 300K and N > 1018 cm–3.

  5. Chapter 6 pn Junction Diodes: I-V Characteristics Effect of R–G in Depletion Region • R–G in the depletion region contributes an additional component of diode current IR–G. • The net generation rate is given by • ET: trap-state energy level

  6. Chapter 6 pn Junction Diodes: I-V Characteristics Effect of R–G in Depletion Region • Continuing, • For reverse bias, with the carrier concentrations n and p being negligible, • Reverse biases with VA< – few kT/q • Thermal carrier generation in the depletion layer • Carriers swept by electric field and generate additional current

  7. Chapter 6 pn Junction Diodes: I-V Characteristics Effect of R–G in Depletion Region • Continuing, • For forward bias, the carrier concentrations n and p cannot be neglected, • High carrier concentrations in the depletion layer • Additional carrier recombination in the region that decreases current

  8. Chapter 6 pn Junction Diodes: I-V Characteristics Effect of R–G in Depletion Region Diffusion, ideal diode

  9. Chapter 6 pn Junction Diodes: I-V Characteristics Effect of Series Resistance • The assumption that applied voltage is dropped only across the depletion region is not fully right. Voltage drop, significant for high I

  10. Chapter 6 pn Junction Diodes: I-V Characteristics Effect of Series Resistance • As part of the applied voltage is wasted, a larger applied voltage is necessary to achieve the same level of current compared to the ideal. RS can be determined experimentally

  11. Chapter 6 pn Junction Diodes: I-V Characteristics Effect of High-Level Injection • As VA increases and about to reach Vbi, the side of the junction which is more lightly doped will eventually reach high-level injection: (for a p+n junction) (for a pn+ junction) • This means that the minority carrier concentration approaches the majority doping concentration. • Then, the majority carrier concentration must increase to maintain the neutrality. • This majority-carrier diffusion current reduces the diode current from the ideal.

  12. Chapter 6 pn Junction Diodes: I-V Characteristics High-Level Injection Effect Perturbation of both minority and majority carrier

  13. Forward-bias current Chapter 6 pn Junction Diodes: I-V Characteristics Summary Deviations from ideal I-V Reverse-bias current Due to thermal generation in depletion region Due to high-level injection and series resistance in quasineutral regions Due to avalanching and Zener process Due to thermal recombination in depletion region

  14. Chapter 6 pn Junction Diodes: I-V Characteristics Minority-Carrier Charge Storage • When VA>0, excess minority carriers are stored in the quasineutral regions of a pn junction.

  15. Chapter 6 pn Junction Diodes: I-V Characteristics Charge Control Approach • Consider a forward-biased pn junction. • The total excess hole charge in the n quasineutral region is: • Since the electric field E»0, • Therefore (after all terms multiplied by q), • The minority carrier diffusion equation is (without GL):

  16. Chapter 6 pn Junction Diodes: I-V Characteristics Charge Control Approach • Integrating over the n quasineutral region (after all terms multiplied byAdx), QP QP • Furthermore, in a p+n junction, 0 • So: In steady state

  17. Chapter 6 pn Junction Diodes: I-V Characteristics Charge Control Approach • In steady state, we can calculate pn junction current in two ways: • From slopes of Δnp(–xp) and Δpn(xn) • From steady-state charges QN and QP stored in each “excess minority charge distribution” • Therefore, • Similarly,

  18. Chapter 6 pn Junction Diodes: I-V Characteristics Charge Control Approach • Moreover, in a p+n junction: In steady state

  19. Chapter 6 pn Junction Diodes: I-V Characteristics Narrow-Base Diode • Narrow-base diode: a diode where the width of the quasineutral region on the lightly doped side of the junction is on the order of or less than one diffusion length. n-side contact

  20. Chapter 6 pn Junction Diodes: I-V Characteristics Narrow-Base Diode I–V • We have the following boundary conditions: • Then, the solution is of the form: • Applying the boundary conditions, we have:

  21. Chapter 6 pn Junction Diodes: I-V Characteristics Narrow-Base Diode I–V • Solving for A1 and A2, and substituting back: • Note that • The solution can be written more compactly as

  22. Chapter 6 pn Junction Diodes: I-V Characteristics Narrow-Base Diode I–V • With decrease base width, xc’0: • Δpn is a linear function of x due to negligible thermal R–G in region much shorter than one diffusion length •  JPis constant • This approximation can be derived using Taylor series approximation

  23. Narrow-Base Diode I–V Chapter 6 pn Junction Diodes: I-V Characteristics • Because , then • Then, for a p+n junction:

  24. Chapter 6 pn Junction Diodes: I-V Characteristics Narrow-Base Diode I–V • If xc’ << LP, • Resulting • Increase of reverse bias means • Increase of reverse current • Increase of depletion width • Decrease of quasineutral region xc’=xc–xn

  25. Chapter 6 pn Junction Diodes: I-V Characteristics Wide-Base Diode • Rewriting the general solution for carrier excess, • For the case of wide-base diode (xc’>> LP), Back to ideal diode solution

  26. Chapter 6 pn Junction Diodes: I-V Characteristics Wide-Base Diode • Rewriting the general solution for diffusion current, • For the case of wide-base diode (xc’>> LP), Back to ideal diode solution

  27. Chapter 6 pn Junction Diodes: I-V Characteristics Homework 5 • 1. (8.14) • The cross-sectional area of a silicon pn junction is 10–3 cm2. The temperature of the diode is 300 K, and the doping concentrations are ND = 1016 cm–3 and NA = 8×1015 cm–3. Assume minority carrier lifetimes of τn0 = 10–6 s and τp0 = 10–7 s. • Calculate the total number of excess electrons in the p region and the total number of excess holes in the n region for (a) VA = 0.3 V, (b) VA = 0.4V, and (c) VA = 0.5 V. • 2. (7.2) • Problem 6.11, Pierret’s “Semiconductor Device Fundamentals”. • Due: 11.06.2012.

More Related