1 / 21

EXP AERODYNAMICS

AD FOR COMMERCIAL PILOTS LICENSE

dipy2014
Download Presentation

EXP AERODYNAMICS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 140)The lift coefficient (CL) of an aeroplane in steady horizontal flight is 0.35. Increase in angle of attack of 1 degree will increase CL by 0.079. A vertical up gust instantly changes the angle of attack by 2 degrees. The load factor will be : A1.9 B1.45 C0.9 D0.45

  2. 141) Which aeroplane behaviour will be corrected by a yaw damper ? • A Spiral dive. • B Buffeting. • C Dutch roll. • DTuck under.

  3. 142) The aft movement of the centre of pressure during the acceleration through the transonic flight regime will: • Adecrease the static lateral stability. • B increase the static longitudinal stability. • Cdecrease the longitudinal stability. • D increase the static lateral stability.

  4. 143) The relative thickness of an aerofoil is expressed in: • A camber. • Bmeters. • Cdegrees cross section tail angle. • D% chord.

  5. 144)The frontal area of a body, placed in a certain airstream is increased by a factor 3. The shape will not alter. The aerodynamic drag will increase with a factor : • A 1.5. • B 3. • C 9. • D 6.

  6. 145) (For this question use annex 081-6271A) The high lift device shown in the figure is a • A Slat • B Fowler flap • C Slotted flap • D Krueger flap

  7. 146) One disadvantage of the swept back wing is it's stalling characteristics. At the stall : • Awing root stall will occur first, which produces a rolling moment • B tip stall will occur first, which produces a nose-down moment • C leading edge stall will occur first, which produces a nose down moment • D tip stall will occur first, which produces a pitch-up moment.

  8. 147) Shock induced separation results in • Adecreasing lift. • Bconstant lift. • C increasing lift. • Ddecreasing drag.

  9. 148) (For this question use annex 081-6249A) Which line represents the total drag line of an aeroplane? • A Line d • B Line c • C Line a • D Line b

  10. 149) In what way is the longitudinal stability affected by the degree of positive camber of the aerofoil? • A Positive, because the centre of pressure shifts rearward at increasing angle of attack. • BNegative, because the lift vector rotates forward at increasing angle of attack. • CPositive, because the lift vector rotates backward at increasing angle of attack. • DNo effect, because camber of the aerofoil produces a constant pitch down moment coefficient, independent of angle of attack.

  11. 150) (For this question use annex 081-1331A) An A 310 aeroplane weighing 100 tons is turning at FL 350 at constant altitude with a bank of 50 degrees. Its flight Mach range between low-speed buffeting and high speed buffeting goes from: • AM= 0.72 to M higher than 0.84 • B M= 0.65 to M higher than 0.84 • C M= 0.74 to M= 0.84 • D M= 0.69 to M higher than 0.84

  12. 151) The critical Mach Number of an aeroplane can be increased by: • Asweep back of the wings. • B vortex generators. • C control deflection • D dihedral of the wings.

  13. 152) If an aeroplane flies in the ground effect • A the lift is increased and the drag is decreased. • Bthe effective angle of attack is decreased. • C the induced angle of attack is increased. • D drag and lift are reduced.

  14. 153) Flap selection at constant IAS in straight and level flight will increase the : • Alift and the drag. • B maximum lift coefficient (CL max) and the drag. • C lift coefficient and the drag. • D stall speed.

  15. 154) Which of these definitions of propeller parameters is correct? • A Propeller angle of attack = angle between blade chord line and propeller vertical plane • B Critical tip velocity = propeller speed at which risk of flow separation at some parts of propeller blade occurs. • C geometric propeller pitch = the theoretical distance a propeller blade element is travelling in forward direction in one propeller revolution • DBlade angle = angle between blade chord line and propeller axis

  16. 155) Compared with stalling airspeed (VS) in a given configuration, the airspeed at which stick shaker will be triggered is: • A 1.30 VS. • B 1.12 VS. • Cgreater than VS. • D 1.20 VS.

  17. 156) Which one of the following systems suppresses the tendency to "Dutch roll"? • ARudder limiter. • BYaw damper. • CRoll spoilers. • DSpoiler mixer.

  18. 157) Bernoulli's equation can be written as : (pt = total pressure, ps = static pressure, q = dynamic pressure) • Apt= q - ps • Bpt- q = ps • C pt = ps - q • D pt + ps = q

  19. 158) Which formula or equation describes the relationship between force (F), acceleration (a) and mass (m)? • A a=F. m • B F=m / a • C F=m. a • D m=F.a

  20. 159) The high speed buffet is induced by • A boundary layer separation due to shock waves. • B boundary layer control. • C expansion waves on the wing upper side. • D a shift of the centre of gravity.

  21. 160) "A line connecting the leading- and trailing edge midway between the upper and lower surface of a aerofoil". This definition is applicable for : • A the mean aerodynamic chord line • B the upper camber line • C the camber line • D the chord line

More Related