Best Way to fix Repairable Surfboard Damage

1. Best Way to fix Repairable Surfboard Damage Traditional hand-shaped surfboards are easy to damage, and even the slightest cracks can cause severe damage if untreated. Fixing the surfboard on your own can help save you the hassle of taking it to the local shaper. The DIY repair option is also cost-effective. What is the best method for DIY surfboard repair? Applying a ding tape to the damaged part can help to stop water from entering the surfboard. Ding tape is an easy, lightweight, and cost-effective surfboard repair solution. Here are the steps to how to fix a surfboard with ding tape: Sand the ding area lightly to ensure that it is smooth and free of any sharp surfaces. Thoroughly clean the damaged area with the cleaning wipe Peel the backer from the ding tape and apply the sticky side over the dent, ensuring no trapped air bubbles. Peel the facing from the ding tape that you applied to your surfboard. Here are a few Types of Surfboard Damage that you can Repair: 1. Broken Fins and Fin Boxes You will have broken fins when you run your board aground, hit a rock, or hit another surfer. Heavyweight surfers can even break fins or boxes on a hard turn. 2. Fin Gouges Fins are sharp and can slice through fiberglass and foam. There will be a fin gouge when someone else’s fins make contact with your surfboard. That usually happens due to poor communication or bad judgment. 3. Stringer Deamination and Spinning Surfboards with a custom wood stringer can develop problems where the wood meets the foam. That's the outcome of the two varying materials compressing, flexing, and aging differently over time. 4. Pressure Dents

2. Pressure dents will occur eventually, as you keep on surfing. Your weight compresses the foam and the glass, and over time dents will develop from the areas you step most or place that experience significant impacts. 5. Delamination This occurs when the fiberglass and foam lose their connection. It can be the result of the drop, sun exposure, impacts, and temperature changes. If you surf regularly, your board will experience damages over time. So, it’s better to be prepared to fix them when necessary to surf longer. Ways to Avoid Damaging your Surfboard Some damages will occur no matter how much you try to avoid, but there are some things you can do to help minimize the risk of dinging your surfboard, such as: After you're done surfing, rinse the saltwater off your board. That's because salt water is corrosive and can damage the glass over time. Make sure your surfboard is out of direct sunlight. Exposure to sun and UV rays can lead to glass chipping and foam yellowing. Avoid storing your surfboards in extreme temperatures. It is ideal to use a surf bag when you’re not using the board and going to and from the beach. Wrapping Up Understanding the different ways to fix a surfboard can keep it out of the landfill and in the water. You don’t have to part ways with your favorite board just because of some dings. Source: https://dingzap.com/repair-guide