1 / 15

Objective

Lumped Burrito Using Lumped Capacitance to Cook a Frozen Burrito Chad Pharo & Chris Howald ME EN 340 Heat Transfer Project. Objective.

despres
Download Presentation

Objective

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lumped BurritoUsing Lumped Capacitance to Cook a Frozen BurritoChad Pharo & Chris Howald ME EN 340Heat Transfer Project

  2. Objective • In ME EN 340, we have to make many assumptions for our homework problems. Lumped capacitance is no exception – several assumptions are made during a typical problem. • For our project, we wanted to see how accurate the lumped capacitance method would be for predicting the cooking time of a frozen burrito. Lumped Burrito

  3. Description of Experiment • We cooked 3 frozen burritos at different temperatures – 300°F, 350°F, and 400°F • The burritos were cooked for the time specified by the lumped capacitance calculations using Tfinal = 165°F • At the end of the time period, we measured the interior temperature of the burrito and compared it to the interior temperature of a burrito cooked with the recommended time and oven temperature. Lumped Burrito

  4. Assumptions • Burrito assumed to be a cylinder • Tsur = T∞ for radiation calculations • Only modes of heat transfer considered are free convection, radiation, and conduction through the burrito (ignore conduction through the cooking rack) • Thermophysical properties of burrito were estimated as those of water (Table A-6)… like the quizzes in class • Emissivity value of plaster board was assumed (ε = 0.92) since the outer tortillas are hard • Final temperature of Tfinal = 165°F was chosen based on average food quality standards Lumped Burrito

  5. CalculationsVariables Defined L = 0.143 m • Properties of water @ 273 K: ρ = 1000 kg/ m3 ; k = 0.569 W/m*K ;  cp = 4217 J/kg*K ; α = 1.3493e-7 m2 / s • Ti = 0°F = 255.37 K • T∞,1 = 300°F = 422.04 K • T∞,2 = 350°F = 449.82 K • T∞,3 = 400°F = 477.59 K • Tfilm,1 = 338.71 K • Tfilm,2 = 352.60 K • Tfilm,3 = 366.48 K D = 0.0381 m Lumped Burrito

  6. CalculationsEquations Used • Free Convection: • Radiation: Lumped Burrito

  7. CalculationsEquations Continued • Biot Number: • Lumped Capacitance: Lumped Burrito

  8. Carrying Out the Experiment… Internal temperature was measured with food thermometer Lumped Capacitance Burrito @ 400°F was crispy on the outside Burrito @ recommended settings burst in the oven (too hot for too long) Lumped Burrito

  9. Results Lumped Burrito

  10. Conclusions • We did not reach the desired Tfinal = 165°F using the lumped capacitance model; however, the burritos were still an acceptable temperature for consumption. • The lumped capacitance results (in our opinion) were better than the recommended package directions because the package directions caused the burrito to burst open inside the oven. • Overall, the lumped capacitance method is an acceptable way to cook a frozen burrito. Lumped Burrito

  11. FYI… Lumped Burrito

  12. Appendices(Hand Calculations) Lumped Burrito

  13. Appendices Lumped Burrito

  14. Iteration 1 Iteration 2 Iteration 3 Lumped Burrito

  15. Lumped Capacitance times Actual temperatures Lumped Burrito

More Related