SC UZINA MECANICA ORĂŞTIE SA

1. SC UZINA MECANICA ORĂŞTIE SA Ductile iron pipes Even water need us!

2. Designed and build up to run as an independent production capacity Total surface: 57.639 sqm Build surface: 20.208 sqm Concreted platform 6.381 sqm Pipe foundry

3. Pipes are produced in conformity with European and international standards: EN 545, ISO 2531 and DIN 28610 (Certificate nr. 20/March2004 – TUV Germany) Quality insurance The Quality Management System worked out and implemented in conformity with ISO 9001-2001 requirements, is certified by TUV Germany, guaranteeing production and commercializing of products in total quality system. (Certificate nr. 12 100 9817/February 2004)

4. Melting Low frequency induction furnace Melting capacity: 12,5 to/furnace Melting time: 3,5 h/furnace Temperature: 1550ºC Installed power: 2800 kWh Frequency: 50 Hz Charging procedure: ladle 4 to Producer: Independenţa Sibiu (Ro)(2 pcs) Medium frequency induction furnace Melting capacity: 8,4 t Melting time: 43 min Temperature: 1550ºC Installed power: 7400 kWh Frequency: 250 Hz Charging procedure: vibrating carriage – 9 to – programmable (Automat Siemens SPC Simatic S7) Producer: ABB (1 pc)

5. Holding furnace Capacity: 65/85 t Max temperature: 1550ºC Installed power: 800 kWh Frequency: 50 Hz Furnace type: inductor with channel Charging ladles (10 to) Mg-treatment - Tundish system for 1 and 3 t ladles with pocket Seller: BBC (1 pcs)

6. DN (mm) 100 150 200 250 300 350 400 500 600 700 Theoretical capacity (pcs/h) 80 60 60 40 40 40 40 20 20 20 Core-shooting plant Core-shooting machine (Producer: IMF Italy) • COLD-BOXprocess • Cycle of core boxes: 3 min • Working mode : • manual • automatically – programmable Siemens SPC Simatic S5

7. DN (mm) 100 150 200 250 300 350 400 500 600 700 Theoretical capacity (pipes/h) 48 40 36 28 25 23 22 18 15 11 Centrifugal casting machines Casting (Producer: Bracker Germany) • Working mode: manual  automatically – programmable Siemens SPC Simatic S5 • Pipe length: 6 m + spigot length DN 100 – DN 300 DN 350 – DN700 Electrical capacity use: 130 kWh Electrical capacity use: 150 kWh Recycled cooling water Recycled cooling water consumption: 80 mc/h consumption: 120 mc/h

8. Annealing furnace • Furnacedimensions: • Useful length 36 m • Breadth 7,3 m • Average height 2,25 m • Capacity ~ 22 t/h • Temperature (max) 1030ºC • Chain speed (max) 0,6m/min • Consumptions: • natural gas 800 Nm³/h • pressed air 100 m³/h • Refractory lining: • Refractory concrete, refractory brick, ceramic fibber • Working mode: • automatically – programmable Siemens SPC Simatic S5 • (Producer: IOB Germany)

9. Zinc coatingmachine • Procedure: with Zn wire, by thermo pulverizing with electric arc • Thickness of zinc layer: 25µm(min 130 g/sqm) • Dust - exhaust plant: filter (Beth) – 280 sqm Working mode: • manual • automatically – programmable Siemens SPC Simatic S5

10. Pressure water station • Clamping force:240 Mpa

11. Combined cut-of and chamfering machine • Cutting device: • 3 cutting heads disposed at 120º • Cutting tool: • 3 milling tools with cutting alloy tips • Extra equipment: • removal device for transported of ring for foldingtests

12. Concrete lining plant • Procedure: low speed • Concrete: obtaining in Eirich mixer • Concrete transfer system: mechanical snake-pump • Lining: by lance with stinger beam • Consistence of concrete – insured by a mechanical pipe rotation and vibration unit • Maturing chamber: • Dimensions: 22x8x2,8 m • Temperature: max 110ºC • Humidity: max 90% • Curing capacity: 15 to/h • Working mode: manual • automatically – programmable Siemens SPC Simatic S5

13. Bitumen coatingplant • Procedure: - spraying with AIRLES system • Layer thickness: min 70µm • Used material: Inertol BS 10 • Curing chamber: • Dimensions: 25 x 8 x 2,8 m • Temperature: max 70ºC • Curing time: 35 min/pipe • Working mode: • manual • automatically – programmable Siemens SPC Simatic S5

14. Spectrometer SPECTROLAB – LAVFA 18 A • Base: iron • Analytical program for: • Iron – 17 elements+base (C, Si, Mn, P, S, Cr, Mo, Ni, Al, Cu, Ti, V, Mg, Pb, Se, Ce, Te, Fe) • Steel – 16 elements+base (C, Si, Mn, P, S, Cr, Mo, Ni, Al, Cu, Ti, V, Pb, Se, Ce, Te, Fe)

15. Mould repair workshop • Pressure6,5 bar • Mould revolution:4-28 rev/min(depending DN) • Hammering time: about 2-10 hours (depending DN) • Length of phonic chamber: 8 m • Working regime: • automatically – programmable Siemens SPC Simatic S5 Pneumatically hammering machine • Other equipments: • Straightening plate  Welding equipment • Grinding machine  Transfer system • Lathe - crane 6,3 to - lateral motopiler “LINDE”

16. Overhead cranes Casting zone, treatment and bitumen coating zone: • crane 16/5tx22m with weighting (20 to) – 1 pc • crane 12,5tx22m – 1 pc • crane 8tx22m – 1 pc Processing, concrete lining, fittings, compressors, thermal point: • beam crane 3,2 to – 5 pcs Mould workshop: • crane 6,3tx16m – 1 pc Storage and delivery: • gantry crane 12 to – 1 pc • External charging: • crane 5tx22m with electromagnet - 2 pcs • Internal charging • crane 8tx16m with electromagnet and weighting system (10 to)– 1 pc • crane 12,5tx16m with electromagnet and weighting system (10 to) – 1 pc • crane 5tx9m with weighting – 1 pc • Melting zone: • crane 12/5tx22m with weighting system (20 to) – 1 pc • crane 16/5tx22m – 1 pc

17. Electro compressors (with screw) • Type “Kaeser” - air capacity: 35,7 m³/min - pressure: max 8,5 bar - variable capacity:20-25 m³/min - pressure: max 8,5 bar • Type “Atlas Copco” - air capacity:24,6 m³/min - pressure: max 10 bar 3 pcs 1 pcs 2 pcs

18. Motopiler Casting: • Frontal fork piler with hydraulic rotation system and weighting device - 8 to - 2 pcs Store and delivery • Frontal fork piler - 16 to - 1 pc Mould transport • Lateral fork piler - 6 to - 1 pc LINDE

19. Dust exhausters • Melting plant • Filter: type Fabri Pulse; 393 sqm; with spark separator. • Zinc coating plant • Filter: type Beth; 280 sqm; with cyclone. • Processing plant • Filter: type Fabri Pulse; 320 sqm.

20. This ranks among Europe’s latest generation factories in this field.

21. The high degree of attractiveness of our offer is also provided by the location of the above mentioned achievement, namely Orastie town which has a distinct economic potential in the area and is located in the south-west of Transylvania, on the Muresului river Valley, in the pan European corridor No. 4.. The access into the town is made through two principal national and European ways of communication: road E 68 (DN 7) and railway – line 200, main line 2. The environment, in which business is developing in Orastie, offers different possibilities to investors to develop businesses. The cultural, historical and touristy background of Orastie and its surrounding district is a real advantage which under the current and future conditions will constitute the starting point for a successful and safe business.

22. We consider that this is a very good opportunity to invite, at this moment, those who are interested in it and we refer, of course, to the business people, to participate together with us to the success of the privatization process.