1 / 55

CHAPTER THREE Abstraction From Precipitation

. CHAPTER THREE Abstraction From Precipitation. Engineering Hydrology (ECIV 4323). Instructor: Dr. Yunes Mogheir 2019. LOSSES FROM PRECIPITATION. Evaporation PROCESS. Influencing Factors.

Download Presentation

CHAPTER THREE Abstraction From Precipitation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CHAPTER THREEAbstraction From Precipitation Engineering Hydrology (ECIV 4323) Instructor: Dr. Yunes Mogheir 2019

  2. LOSSES FROM PRECIPITATION

  3. Evaporation PROCESS

  4. Influencing Factors 1-Vapour pressures at the water surface and air above: the rate of evaporation is proportional to the difference between the saturation vapour pressure at the water surface (Dalton’s law) Where EL = C (ew – ea) EL : rate of evaporation (mm/day) C : a coefficient depend on wind velocity, atmospheric pressure and other factors ew : the saturation vapour pressure at the water surface (mm of mercury) ea : the actual vapour pressure of air (mm of mercury)

  5. Influencing Factors 2. Air and water temperature: the rate of evaporation increases with an increase in the water temperature. 3. Wind : the rate of evaporation increases with the wind speed up to critical speed beyond which any further increase in the wind speed has no influence on the evaporation rate 4.Atmosphere pressure: a decrease in the barometric pressure ( as in high altitudes), increases evaporation. 5. Quality of water: under identical condition evaporation from sea water is about 2-3% less that from fresh water. 6. Size of water body

  6. More Explanations of Factors

  7. Evaporation Measurement • EVAPORIMETER • The most widely used method of finding or monitoring the water body evaporation. • The standard National Weather Bureau Class A pan ( 1.21 m diameter, 25.5 cm depth, it is placed on a wooden structure of 15 cm height).

  8. Pan Coefficient Cp • The actual evaporation from a nearby lake is less than that of pan evaporation • Why ? • The sides of the pan is exposed to the sun • The temperature over the pan is higher that over the lake • Lake evaporation = Cp x pan evaporation • Cp = pan coefficient and equal 0.7 for Class A land Pan.

  9. Evaporation Estimations Empirical Evaporation Equation

  10. Evaporation Estimations

  11. Evaporation Estimation Analytical methods

  12. Water-budget method, It involves writing the hydrological continuity equation for the lake and determining the evaporation from a knowledge or estimation of other variables. Thus considering the daily average values for a lake, the continuity equation is written as: EL= P + (Vis- Vos) + (Vig- Vog) – TL – Δ S All quantities are in units of volume (m3) or depth (mm) over a reference Area. p,. Vis, Vos and Δ Scan be measured. However, it is not possible to measure Vig, Vogand TL and therefore these quantities can only be estimated. If the unit of time is kept large, say weeks or months, better accuracy in the estimate of ELis possible. In view of the various uncertainties in the estimated values and the possibilities of errors in measured variables, the water-budget method cannot be expected to give very accurate results.

  13. rainfall throughfall stemflow Interception It is the segment of precipitation that is prevented to reach the ground by vegetation and subsequently evaporates Interception = Rainfall – stemflow – throughfall

  14. Route of interception • Interception loss : rain water retained by the vegetation as surface storage >>>> evaporate 2. Througfall : rain water can drip off the plant leaves to join the ground surface or the surface flow 3. Stem flow: the rain water may run along the leaves and braches and down the stem to reach the ground surface

  15. Influencing Factors • Storm characteristics : rainfall intensity, duration, wind …etc • The vegetation : species, age, density of plants and trees 3.Season of the year: time of plant growing It is estimated of that : of the total rainfall in area during plant-growing season, the interception loss is 10-20 %.

  16. 100 Beech trees Interception loss as % Rainfall 80 60 40 20 5 10 15 20 30 Rainfall (mm) Influencing Factors • Estimation of interception can be significant in annual or long-term models • For heavy rainfalls during individual storm events interception is neglected

  17. Estimation of Interception Most interception loss develops during the initial storm period and the rate of interception rapidly approach to zero. Ii = Si + KEt Ii = interception loss in (mm) SI = the interception storage whose values varies from 0.25 to 1.5 depending on the nature of vegetation Ki = ration of vegetal surface area to its projected area E = Evaporation rate in (mm/h) during the precipitation t = duration of rainfall in hours Horton: Li = 0.015+ 0.23 P (ash trees) Li = 0.03+ 0.22 P (oak trees)

  18. Depression Storage When the precipitation of a storm reaches the ground, it must fill up all depressions before it can flow over the surface The volume of water trapped in these depressions called depression storage

  19. Influencing Factors • Type of soil : 0.50 cm for sand, 0.25 cm for clay • The condition of the surface : amount and nature of depression • The slope of Catchment • The soil moisture

  20. Soil water zone – max depth from which water can be returned to surface through capillary action or ET. Unsaturated zone Transmission zone, uniform moisture content, not saturated Gravitational water – flow direction is vertical due to gravity. (unsaturated zone or zone of aeration) Capillary zone, less than atmospheric pressure Wetting Front Groundwater, saturation at atmospheric pressure Infiltration Is the process by which precipitation moves down through the surface of the earth and replenishes soil moisture recharge aquifers, and ultimately support runoff quantities.

  21. Infiltration Capacity Infiltration capacity (fc): The maximum rate at which a given soil at a given time can a absorb water (cm/h) The actual rate of infiltration f can be expressed as : f = fc when i ≥ fc f = i when i < fc Where i = the intensity of rainfall The infiltration capacity of a soil is high at the beginning of a storm and has and extensional decay at the time elapses.

  22. Infiltration Capacity

  23. Measurement of Infiltration • There are two kinds of infiltrometers : • Flooding-type infiltrometer, and

  24. Example 3

  25. Example 1

More Related