1 / 45

The Role of Energy Storage in PV Projects

The Role of Energy Storage in PV Projects. PRODUCED BY EUCI ● January 31, 2011. Overview. Why is electric energy storage (EES) needed? What are the uses to which EES can be put? What’s the regulatory environment for EES?. How has EES been deployed so far?

dareh
Download Presentation

The Role of Energy Storage in PV Projects

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Role of Energy Storage in PV Projects PRODUCED BY EUCI ● January 31, 2011

  2. Overview • Why is electric energy storage (EES) needed? • What are the uses to which EES can be put? • What’s the regulatory environment for EES? • How has EES been deployed so far? • What issues do parties need to consider in EES transactions?

  3. Why is Electric Energy Storage (EES) needed? Generally, electricity must be used as soon as it is produced and must therefore be produced as and when it is needed. Wind and solar generation present forecasting and variability challenges that impose a cost on the grid. Grid operators want to shift this cost onto wind and solar developers in the form of “integration charges.” See, e.g., BPA Rate Case. Integration charges apply mainly to wind at this point but BPA, Xcel, have expressed a desire to extend charges to solar. “Curtailments” of generation may signal the grid’s inability to absorb intermittent resources and can make PPAs hard to negotiate and projects hard to finance. Utilities or system operators may seek caps for intermittent renewable energy.

  4. Electric Energy Storage (EES) and Solar PV Energy Solar PV has an advantage over wind in that its generation profile is closer to peak loads. Solar PV can be combined with electric energy storage (EES) in “island grid” or “micro-grid” systems (e.g., Hawaii, Alaska, isolated grids). Energy generated from solar PV could be stored for use after sundown (peak shifting). EES could be used to smooth intra-hour variations in solar generation occurring on partly-cloudy days.

  5. PV Array on a Partly Cloudy Day

  6. Alternatives to EES: Non-Storage Mitigation Measures Non-storage tools defer the date when addition of more intermittent generation becomes impractical. Geographical diversity—increase size of plant, distribute fleet Improved intermittent generation forecasting Construction of more electric transmission to take advantage of fleet Use of within-hour scheduling changes Generator self-supply of regulation services (the BPA/Iberdrola pilot) Market acquisition of regulation down services (the BPA/Calpine pilot) Dynamic power transfers Combination of balancing authorities However, these non-storage measures can only accomplish so much: Energy storage solutions will increasingly become necessary for continued integration of intermittent generation resources.

  7. Electric Energy Storage (EES) and Solar PV Energy EES can help integrate intermittent solar PV energy, as well as wind—the key question is whether it is cost effective. Who should deploy EES? Developers, load-serving utilities, grid operators, or some combination? Is EES transmission, generation, distribution, load or something else? Despite uncertainty,solar and wind developers and utilities are beginning to enter into transactions with EES providers. The move to EES is likely to be evolutionary rather than revolutionary.

  8. How EES Can Be Used: “Peak Shifting” • Store electricity generated during periods of low demand (e.g., from wind plants at night) and use the stored electricity to meet load during peak periods. • Examples of “Peak Shifting” Technologies • End-use thermal storage • Water heaters (e.g,Steffes Corporation) • Air conditioners (e.g., ICE Energy, CALMAC) • Plug-in electric vehicle batteries (V2G) • Grid Scale Pumped Hydro or Compressed Air Energy Storage (CAES)

  9. How EES Can Be Used: Regulation and Load Following • Regulation • Balance electricity supply and demand fluctuations over seconds or minutes • Stabilize voltage or frequency • Load following—tens of minutes/hours • Technologies: Batteries; flywheels; advanced capacitors; regenerative hydrogen fuel cells; superconducting magnetic energy storage (SMES); pumped storage hydro; CAES

  10. How EES Can Be Used: Transmission EES can maintain service to transmission customers by providing reactive power or by providing virtual transmission service in the event of a line trip. EES may also be attractive in situations where it enables a utility to avoid the cost and delay of building new transmission or peaking generation.

  11. EES Cost Elements • Costs/benefits vary depending on technology and electricity market in which it is deployed • Cost factors • Rated power (maximum rate of discharge) • Efficiency • Energy (duration of discharge) • Frequency and depth of charge • Lifecycle costs ($/kW-year): data is available on capital costs, less data is available on O&M

  12. Comparison Sampling of EES CostsSource: Energy Storage and the Smart Grid (TiE Oregon Clean Energy Special Interest Group100421 ), presented in Bokka, et al., Feeder Advanced Storage Transaction: Battery Storage for a Smarter Grid, Portland State University Presentation to Portland General Electric on FAST Project (June 15, 2010)

  13. FERC’s Approach to EES Rate Setting and Cost Recovery In June 2010, the Federal Energy Regulatory Commission (FERC) issued a Request for Comments Regarding Rates, Accounting and Financial Reporting for New Electric Storage Technologies, FERC Docket No. AD10-13-000 (June 11, 2010) (comment period closed). FERC may issue a Notice of Proposed Rulemaking (NOPR) on this subject in the near future. FERC’s Request for Comments itself provides a helpful overview of the EES services over which FERC will probably have rate-setting jurisdiction, as well as the EES services that will be subject to retail rate recovery under state public utility commission jurisdiction.

  14. Maintaining Service to Transmission Customers • EES Services for Transmission Customers • EES can provide reactive power. • EES can serve as a “virtual” replacement transmission circuit if a transmission line trip occurs (e.g., a battery that releases energy to replace energy cut off by a tripped transmission line). • FERC would likely allow cost recovery under jurisdictional transmission rate under certain circumstances.

  15. Maintaining Service to Transmission Customers • Cases Considering Whether EES is a Transmission Asset • Western Grid Development, LLC, 130 FERC ¶ 61,056(2010) (NaS battery eligible for jurisdictional transmission rates). • Nevada Hydro Co., 122 FERC 61,272 (2008)(deferred ruling whether pumped storage hydro would be treated as transmission until after CAISO proceeding). • Application of Electric Transmission Texas, LLC for Regulatory Approvals Related to Installation of a Sodium Sulfur Battery at Presidio, Texas, PUC Docket No. 35994 (Texas PUC 2009) (4.8 MW NaS Battery).

  16. Enhancing the Value of Generation EES facility could “peak shift” in order to take advantage of differences between off peak and peak pricing. FERC would probably treat this as being a service offered under the developer’s wholesale rates, presumably pursuant to a market-based rate tariff.

  17. Providing Ancillary Services Ancillary services maintain reliability and deliverability of power to customers in the face of changing load conditions Examples include frequency regulation, voltage control and contingency reserve. EES provider could sell ancillary services where there is a competitive market for such services (e.g., in an ISO). Will the ancillary services market support the financing of EES projects, or will bilateral commitments be required to insure the project’s ability to serve debt?

  18. EES Services Subject to State Rate-Setting Jurisdiction An EES system installed on the distribution grid to provide voltage support or to serve as a virtual replacement distribution circuit in the case of a line trip. A peak-shifting EES system used to provide power to a load-serving utility’s retail customers An EES system with a demand-response component (e.g., end-use thermal storage) may receive rate recovery as a demand response program

  19. The Challenge of Multi-Use EES Facilities An EES facility could be used to provide transmission services, peak shifting services for retail customers, and ancillary services. Will the facility as a whole be subject to one rate treatment, or will different aspects of the same facility be subject to different rate treatment?

  20. “Gas Storage” or “Tolling Agreement” Model To keep transmission and generation services separate, EES facility developer would provide an “open-access” storage service but would not buy or sell energy from the facility. “Tolling” customer would pay injection, capacity and/or withdrawal charges to EES owner under long-term contract. Market risks and benefits from purchase, sale or use of energy would be for the account of the customer rather than the EES owner. The customer could, for example, re-sell stored energy subject to FERC wholesale rate jurisdiction (e.g., to arbitrage non-peak energy generation against peal load). If the customer used the EES facility for transmission reliability purposes, the cost of the EES service could be recoverable in transmission rates.

  21. California’s AB 2514 • Load-Serving Entities (LSEs) • By March 1, 2012, CPUC is to open a proceeding to determine appropriate targets, if any, for each LSE to procure viable and cost-effective energy storage systems • If the CPUC determines a procurement target is appropriate, then it is to adopt by October 1, 2013: • A 1st energy storage system procurement target to be achieved by each LSE by December 31, 2015; and • A 2nd procurement target to be achieved by December 31, 2020.

  22. California’s AB 2514 • Publicly owned utilities • By March 1, 2012, the governing board of the local publicly owned electric utility is to open a proceeding to determine appropriate targets, if any, for the utility to procure viable and cost-effective energy storage systems • If the governing board determines that a procurement target is appropriate, it is to adopt by October 1, 2014: • A 1st target to be achieved by the utility by December 31, 2016; and • A 2nd target to be achieved by December 31, 2021.

  23. Possibility of Federal Legislation • Last Congress: Storage Technology for Renewable and Green Energy Act of 2010, S. 3617 (Senators Bingamen, Wyden, & Shaheen) • Investment tax credit of 20% for grid-connected “qualified energy storage property” with greater than 1 MW per hour power rating • Clean Renewable Energy Bonds (CREBS) would be available for grid-connected EES • Tax credit for specified onsite EES • Tax credit for specified residential EES

  24. EES Projects: Thermal Storage Southern California Public Power Authority (SCPPA) recently announced a purchase of ICE Energy’s “Ice Bear” Thermal Energy Storage Units, which use off-peak energy to produce ice that is used to cool refrigerant for air conditioning during peak hours BPA’s thermal storage program with Mason County PUD No. 3

  25. EES Projects: MinWind • Xcel’sMinWind W2B battery project • Wind-to-Battery (W2B) demonstration project • 1 MW, 7.2 MWhNaS (sodium sulfur) battery purchased from NGK Insulators Ltd. (NGK) • Installed near the 11.5 MW MinWind Energy LLC (MWD) wind facility in Luverne, MN • Report at http://www.xcelenergy.com/Minnesota/Company/Environment/Renewable%20Development%20Fund/RDFProjects/Pages/SodiumSulfurBatteryEnergyStorage.aspx (click “Milestone 5”)

  26. EES Projects: MinWind • Preliminary results (July 2010) indicate that the battery has the ability to: • Effectively shift wind energy from off-peak to on-peak availability • Reduce the need to compensate for the variability and limited predictability of wind generation resources • Support the transmission grid system by providing voltage support, which contributes to system reliability • Support regional electricity market by responding to real-time imbalances between generation and load • Duke and SCE are also conducting battery/wind integration tests.

  27. EES Projects: First Wind Kaheawa Project (Hawaii) • First Wind’s 30 MW Kaheawa Wind Project (Maui) • 20 GE wind turbine generators • Supported by a 1.5 MW XtremePowerTMenergy storage and power management system • Xtreme Power reports that this system, after 6 months of use, allows: • Delivery of energy within strict ramping criteria • Storage of energy generated during curtailment periods

  28. EES Projects: First Wind’s Kahuka Wind Project (Hawaii) Kahuka Wind Project (in permitting) The project would incorporate a 15 MVA, 10 MW/hour energy storage system from Xtreme Power. First Wind received $117 million in DOE loan guarantees for the Kahuka Wind Project. EES component of First Wind’s Hawaii projects is “behind the busbar”—HECo buys under PPA

  29. EES Projects: LADWP’s Pine Tree Wind Farm (California) • September 13, 2010: Los Angeles Department of Water & Power (LADWP) entered into an MOU with BYD Ltd. Corp. (China) to develop the parameters and scope of a 5-10 MWh power storage unit to be installed at LADWP’s Pine Tree Wind Farm. • The MOU is an agreement to study EES rather than a commitment to procure storage. • Either party can terminate the MOU upon thirty (30) days notice. • The MOU makes it clear that any equipment procurement must take place through LADWP’s normal procurement process.

  30. EES Projects: LADWP’s Pine Tree Wind Farm (California) • According to the MOU, the purpose of the project is to solve one or more utility challenges: • Improve integration of renewable energy • Shape or firm energy generated from wind and/or solar generation for economic dispatch or to optimize transmission of renewable energy • Improve electric system reliability • Provide demand response • Shift load to off peak • Promote plug-in electric vehicle technology

  31. EES Projects: Flywheel (New York) Developer: Beacon Power Corporation 20 MW flywheel plant located in Stephentown, New York ($69 million, supported by $43 million DoE Loan Guarantee) 8 MW interconnected and on line as of January 24, 2011—world’s first grid-connected fly wheel Fast-rotating rims made of a carbon-fiber composite material store excess & renewably generated energy as kinetic energy. The rims spin on magnetic bearings in a vacuum to minimize energy loss from friction. Stored kinetic energy can be released when demand rises or energy from wind or solar sources is not available. Very fast ramp rate (10x faster than fossil fuel plant) Expected to provide 10% of New York’s frequency regulation needs

  32. EES Projects: Grid-Scale Battery AES Energy Storage LLC Phase 1: 8 MW battery-based storage system in Johnson City, New York (on line) On line and providing frequency regulation services in NYISO Phase 2: Additional 12 MW supported by $17.1 million DoE Loan Guarantee Can charge or discharge in one second in response to automated signal

  33. EES Projects: Vehicle-to-Grid (V2G) PJM Vehicle-to-Grid (V2G) pilot program in Delaware. The program is testing use of electric vehicle batteries to provide frequency regulation and storage of intermittent energy. Each vehicle in pilot project is earning $7-$10 per day to provide regulation services.

  34. EES Projects: Solar PV (CA) • SunPower Corp. • Received a grant of $1.8 million from California’s state solar initiative program (September 2010) • Partnering with ICE Energy, Prudent Energy and ZBB Energy Corporation to develop a pilot energy storage program for a commercial customer (Target)

  35. EES Projects: Solar PV (Hawaii) Kauai Island Utility Cooperative’s 3 MW Kauai Solar Plant, built and run by Poipu Solar Poipu Solarsells to Cooperative under “as delivered” PPA 1.5 MW utility-scale storage battery supplied to the Cooperative by Xtreme Power

  36. EES Projects: Portland General Electric (PGE) FAST Project • Feeder Advanced Storage Transaction (FAST) • ARRA Funded ($20 million) • Goals: • Test high reliability “island” or “micro-grid” • Provide energy during peak load periods • Firm intermittent renewable resources

  37. EES Projects: Portland General Electric (PGE) FAST Project • FAST components • 113 kW Solar PV (Kettle Chips Plant) • 1,300 kWh EnerDel battery • 5 MW Eaton power conditioning system • 5 MW customer-owned diesel backup generators (distributed generation)

  38. EES Projects: Portland General Electric (PGE) FAST Project • FAST Long-Term Benefits may include: • Wind integration (PGE’s 2009 IRP assigns an integration cost of $13.50/MWh of wind generation) • Spinning reserve (worth $5-$5/MWh in PGE’s service territory during Oregon’s peak demand seasons, winter and summer) • Frequency regulation

  39. Possible Models for Use of EES Services by Solar PV EES storage could be installed “behind the busbar” pursuant to a solar PV power purchase agreement with a utility offtaker (First Wind/HECo model). EES could be installed to provide load shifting, firming and reliability services in a microgrid primarily served by solar PV and/or wind. EES could be installed as part of an on-site PV installation. EES services could be sold on a merchant basis by EES developers to solar PV plant owners, grid operators or utilities. Grid operators could acquire EES services to manage intermittency and charge an integration or transmission service charge (which, like wind integration charges, would be allocated between developer and offtaker in PPA negotiations).

  40. EES Transaction Issues: Structure • EES system manufacturers and buyers should be prepared to address the transaction issues outlined in the next few slides, which are likely to arise in any deal involving an EES system. • If a developer or utility wishes to buy an EES system, should it buy a “turnkey” solution or specify the project’s components? • In the context of a PPA, is the EES solution something that the developer installs “behind the busbar” (First Wind/Xtreme Power/HECo) or is the EES solution something the utility arranges (Xcel/MinnWind W2B)?

  41. EES Transaction Issues: Performance • Performance elements • Rated Power (maximum rate of discharge) • Discharge rate • Discharge duration (hours, minutes, seconds) • Efficiency • Lifetime (cycling) • Performance warranties will crop up in procurement agreements and in build-transfer arrangements and will flow through PPAs • What is the duration of the performance warranty? • What if the performance warranty is not satisfied? Liquidated damages? Other remedies?

  42. EES Transactional Issues: Intellectual Property • Intellectual Property (“IP”) is highly relevant to the EES Industry • Entities engaged in this industry should have an IP Strategy • Procurement agreement should include reps, warranties and indemnities around EES producer’s IP • IP is an important due diligence issue

  43. IP Due Diligence Staged Disclosures

  44. EES Transaction Issues: Compliance with Laws The buyer will likely want a representation and warranty that EES supplier is in compliance with all applicable laws The EES buyer may want representations and warranties addressing the concern that the production of the EES system might harm the environment

  45. EES Transaction Issues: Indemnification Intellectual property indemnifications Indemnification against claims and damages arising from production, transportation and delivery process Financial condition (ability to stand behind indemnifications) Required insurance

More Related