1 / 14

Thevenin Voltage Equivalents

Thevenin Voltage Equivalents. Thevenin invented a model called a Thevenin Source for representing a complex circuit using A single “pseudo” source A single “pseudo” resistance

danikam
Download Presentation

Thevenin Voltage Equivalents

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Thevenin Voltage Equivalents • Thevenin invented a model called a Thevenin Source for representing a complex circuit using • A single “pseudo” source • A single “pseudo” resistance • The Thevenin source, Vth, with its associated resistance, Rth, “looks” to the load on the circuit like the actual complex combination of resistances and sources. • This model can be used interchangeably with the more complex circuit when doing analysis. 1

  2. The Function Generator Model • Recall that the function generator has an internal impedance of 50 Ohms. • Could the internal circuitry of the function generator contain only a single source and one resistor? • This is actually the Thevenin equivalent model for the circuit inside the function generator 2

  3. Thevenin Model Load Resistor 3

  4. Note: • We might also see a circuit with no load resistor, like this voltage divider. 4

  5. Thevenin Method A • Find Vth (open circuit voltage) • Remove load if there is one so that load is open • Find voltage across the open load • Find Rth (Thevenin resistance) • Set voltage sources to zero (current sources to open) – in effect, shut off the sources • Find equivalent resistance from A to B B 5

  6. Find Vth • Remove Load A B A B 6

  7. Find Vth • Let Vo=12, R1=2k, R2=4k, R3=3k, R4=1k 7

  8. Find Rth • Short out the voltage source (turn it off) & redraw the circuit for clarity. A A B B 8

  9. Find Rth • First find the parallel combinations of R1 & R2 and R3 & R4. • Then find the series combination of the results. 9

  10. Redraw Circuit as a Thevenin Source • Then add any load and treat it as a voltage divider. 10

  11. Thevenin Method Tricks • Note • When a short goes across a resistor, that resistor is replaced by a short. • When a resistor connects to nothing, there will be no current through it and, thus, no voltage across it. 11

  12. Thevenin Applet (see webpage) • Test your Thevenin skills using this applet from the links for Exp 3 12

  13. Does this really work? • To confirm that the Thevenin method works, add a load and check the voltage across and current through the load to see that the answers agree whether the original circuit is used or its Thevenin equivalent. • If you know the Thevenin equivalent, the circuit analysis becomes much simpler. 13

  14. Thevenin Method Example • Checking the answer with PSpice • Note the identical voltages across the load. • 7.4 - 3.3 = 4.1 (only two significant digits in Rth) 14

More Related