1 / 7

Cheap Arduino Clone By Robomart

It can be powered via the USB connection or with an external power supply. The power source is selected with the help of small jumper which is placed in the middle of power jack and USB connector. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. https://https://www.robomart.com/buy-arduino-board-atmega-8a-india-price

daminisingh
Download Presentation

Cheap Arduino Clone By Robomart

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Cheap Arduino Clone Product Code:RM1115

  2. Introduction to Cheap Arduino Clone The RobomartArduino Board (ATMEGA 8A) is a microcontroller board based on the ATmega8A. It has 14 digital input/output pins, 6 analog inputs, A 16 MHz ceramic resonator, A USB connection, A power jack, An ICSP header and a reset button. It contains everything needed to support the microcontroller, Simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The RobomartArduino Board Atmega8A is differs from all preceding boards in that it does use the PL2303 USB-to-serial driver chip. It has features to program Atmega8A as a USB-to-serial converter.

  3. cheap arduinoClone Board

  4. Features fcheaparduino clone Board Microcontroller-ATmega8A Operating Voltage-7 to 12 volt Input Voltage-7 to 12 volt Digital I/O Pins-14 (of which 3 provide PWM output) Analog Input Pins-6 DC Current per I/O Pin-40 mA Flash Memory-8 KB (of which 2 KB used by bootloader) SRAM-1 KB EEPROM-512 bytes Clock Speed-16 MHz

  5. Contact Us Mob. +91-8744000555 el. +91-120- 4317229 Mob.+91-8744000555 Tel.+91-120-4317229 317229MMMMMMM • Mob. +91-8744000555 • el. +91-120- 4317229 B5 C Block Sector 31, Above Indian Overseas Bank Noida Uttar Pradesh 201301 India Email ID admin@robomart.com Web. https://www.robomart.com

  6. Thank You

More Related