1 / 6

Introduction of SAE J2951 study - possibility of tighter tolerance for WLTP phase -

WLTP-DTP-LabProcICE-189. Introduction of SAE J2951 study - possibility of tighter tolerance for WLTP phase -. It is not ‘normalization’. But we would like to introduce it as one of the solution of less flexibility. SAE J2951 Index. Engine force

dahmen
Download Presentation

Introduction of SAE J2951 study - possibility of tighter tolerance for WLTP phase -

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. WLTP-DTP-LabProcICE-189 Introduction of SAE J2951 study- possibility of tighter tolerance for WLTP phase - It is not ‘normalization’. But we would like to introduce it as one of the solution of less flexibility.

  2. SAE J2951 Index • Engine force • FENG = [F0 + F1*V + F2*V2 + 1.015 * ETW * a]+ • Engine work increment • Wi = FENGi * di • Cycle energy (CE) • CE = ΣWi = Σ[(F0 + F1*Vi + F2*Vi2 + 1.015 * ETW * ai) * di]+ • Energy rating (ER) • ER = (CED - CET) / CET*100 • Distance rating (DR) • DR = (DD - DT) / DT*100 • Energy economy rating (EER) • EER = [1 – (DR / 100 +1) / (ER / 100 +1)] * 100 • Absolute speed change rating (ASCR) • ASCR = (ASCD - ASCT) / ASCT * 100 • ASC = ⊿t*Σ|ai| • Root mean squared speed error (RMSSE) • RMSSE = 2.237 * √(Σ(VDi - VTi)2) / N)

  3. Points of evaluation J2951 Index can; • Detect too smooth driving within tolerance? • Detect it is due to vehicle performance or other intention? Evaluated data, • Data unable to follow the target due to vehicle performance. • Exclude the data with wide open throttle from above. • Data able to follow the target. Index RMSSE may be effective? • Need more data for practicability to achieve tighter tolerance.

  4. Analysis of SAE J2951 Index by Validation data • Points of view • Detect the data unable to follow the target trace? • If exclude the data with WOT, the index become normal. (=similar as the data able to follow the target.) Unable to follow Unable to follow (Ex. WOT) Able to follow (MT) Able to follow (AT) Able to follow (AT) Detected ! DR also detected well, but distance can be adjusted easily. RMSSE works well. But analyzed by only 4 data… (Much) more data is necessary to evaluate practicability.

  5. How to exclude the data with WOT? Black : Speed Red : Throttle Pedal angle These data are excluded from INDEX calculation. WOT Signal of throttle pedal angle or WOT is necessary.

  6. Sensitivity of RMSSE (Ex-H) Exceeding tolerance Integration of (Vtarget -Vactual)2 If the data exceeding the tolerance is excluded, RMSSE≒0.596 RMSSE responds sensitively although the speed gap is within tolerance and short time period. It may be good INDEX for tighter tolerance. But more data analysis is necessary.

More Related