1 / 27

Bachelor of Technology Mechanical

Bachelor of Technology Mechanical. Industrial Materials UOG By: Jahangir Rana. Metals. All metals belong to one of these two groups . Ferrous Metals Non-Ferrous Metals. Ferrous metals.

cybill
Download Presentation

Bachelor of Technology Mechanical

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Bachelor of TechnologyMechanical Industrial Materials UOG By: Jahangir Rana

  2. Metals • All metals belong to one of these two groups.

  3. Ferrous Metals Non-Ferrous Metals

  4. Ferrous metals Ferrous metals are metals, which are mainly made of iron with small amounts of other metals or elements added in order to give the correct properties. Almost all ferrous metals are magnetic and can be picked up with a magnet. These metals rust or oxidise if not treated as they contain iron.

  5. Non-Ferrous metals Non-Ferrous metals are those metals, which do not contain iron. These metals are not magnetic and cannot be attracted by a magnet. Examples of these are aluminium, copper, lead, zinc and tin. These metals do not oxidise as they do not contain iron.

  6. Ferrous Metals

  7. Mild Steel Composition -0.15 to0.30% carbon Properties- Tough, high tensile strength, ductile. Because of low carbon content it can not be hardened and tempered. It must be case hardened. Uses- girders, Plates, nuts and bolts, general purpose.

  8. High Speed Steel Composition- medium carbon, tungsten, chromium and vanadium. Properties - Can be hardened and tempered. Can be brittle. Retains hardness at high temperatures. Uses- Cutting tools for lathes.

  9. Stainless Steel Composition- 18% chromium, and 8% nickel added. Properties - Corrosion resistant Uses- Kitchen draining boards. Pipes, cutlery, aircraft.

  10. High Tensile Steel Composition- Low carbon steel, nickel, and chromium. Properties- Very strong and very tough. Uses- Gears, shafts, engine parts.

  11. High Carbon Steel Composition- 0.70% to 1.40% carbon. Properties- The hardest of the carbon steels. Less ductile, tough and malleable. Uses- Chisels, hammers, drills, files, lathe tools, taps and dies

  12. Medium Carbon Steels Composition- 0.30% to 0.70% carbon. Properties- Stronger and harder than mild steels. Less ductile, tough and malleable. Uses- Metal ropes, wire, garden tools, springs.

  13. Cast Iron Composition- Remelted pig iron with small amounts of scrap steel. Properties- Hard, brittle, strong, cheap, self-lubricating. White cast iron, grey cast iron, malleable cast iron. Uses- Heavy crushing machinery. Car cylinder blocks, vices, machine tool parts, brake drums, machine handle and gear wheels, plumbing fitments

  14. Non-Ferrous Metals

  15. Aluminum Composition- Pure Metal Properties- Grayish-White, soft, malleable, conductive to heat and electricity, It is corrosion resistant. It can be welded but this is difficult. Needs special processes Uses- Aircraft, boats, window frames, saucepans, packaging and insulation, pistons and cranks

  16. Aluminum alloys Composition- Aluminum +4% Copper+1%Manganese Properties- Ductile, Malleable, Work Hardens Uses- Aircraft and vehicle parts

  17. Copper Composition- Pure metal Copper+1%Manganese Properties- Red, tough, ductile, High electrical conductor, corrosion resistant, Can work hard or cold. Needs frequent annealing Uses- Electrical wire, cables and conductors, water and central heating pipes and cylinders. Printed circuit boards, roofs

  18. Brass Composition- 65% copper +35%zinc Properties- Very corrosive, yellow in colour, tarnishes very easily. Harder than copper. Good electrical conductor Uses- Castings, ornaments, valves, forgings

  19. Lead Composition- Pure metal Properties- The heaviest common metal. Soft, malleable, bright and shiny when new but quickly oxidizes to a dull grey. Resistant to corrosion. Uses- Protection against X-Ray machines. Paints, roof coverings, flashings

  20. Zinc Composition- Pure metal Properties- A layer of oxide protects it from corrosion, bluish-white, easily worked Uses- Makes brass. Coating for steel galvanized corrugated iron roofing, tanks, buckets, rust-proof paints

  21. Tin Composition- Pure metal Properties- White and soft, corrosion resistant Uses- Tinplate, making bronze

  22. Gilding metal Composition- 85% copper+15% zinc Properties- Corrosion resistant, golden color, enamels well Uses- Beaten metalwork, jewelry

  23. Pure metals and alloys All metals fall into two categories. Pure metals Alloys.

  24. A pure metalconsists of a single element, which means that it is a metal only having one type of atom in it. The most commonly used pure metals are Aluminium, Copper, Iron, Lead, Zinc, Tin, Silver and Gold.

  25. AnAlloyis a mixture of two or more pure elements. Pure metals sometimes lack certain required properties. To create these properties a number of these pure metals are combined together.

  26. Pure aluminium is rarely used because it is too soft. It is normally mixed with other metals, which produce aluminium alloys that are even stronger than mild steel, are resistant to corrosion but still retain the lightness of aluminium.

More Related