1 / 33

Japan Proton Accelerator Research Complex J-PARC - Nuclear and Particle Physics Facility -

Japan Proton Accelerator Research Complex J-PARC - Nuclear and Particle Physics Facility -. Shin’ya Sawada KEK (High Energy Accelerator Research Organization, Japan). Accelerator Configuration. Cascaded Accelerator Complex:. Hadron Hall (Slow Extracted Beams).

crofoot
Download Presentation

Japan Proton Accelerator Research Complex J-PARC - Nuclear and Particle Physics Facility -

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Japan Proton Accelerator Research ComplexJ-PARC- Nuclear and Particle Physics Facility - Shin’ya Sawada KEK (High Energy Accelerator Research Organization, Japan) Shin'ya Sawada @ Hadron Structure at J-PARC

  2. Accelerator Configuration • Cascaded Accelerator Complex: Hadron Hall (Slow Extracted Beams) 3GeV Rapid Cycling (25Hz) Synchrotron Neutrino Beamline to Super-Kamiokande Linac Materials and Life Science Facility 50GeV Synchrotron Shin'ya Sawada @ Hadron Structure at J-PARC

  3. the High Intensity Frontier J-PARC: • J-PARC aims for the high intensity frontier for • materials/life sciences (3GeV), and • nuclear/particle physics (50GeV) • High intensity proton beam leads to high intensity secondary (neutron, meson, …) beam. • The power (= Energy x Current) is a good measure. • Neutron: from 0.16MW (ISIS) to 1MW • K meson: 5 to 10 times more intense than existing BNL-AGS. Shin'ya Sawada @ Hadron Structure at J-PARC

  4. Phase 1 & 2 • The budget for about 2/3 of the entire project has been approved by the Japanese government from JFY2001 as Phase 1. • Phase 1 (~151 billion Yen) consists of major accelerator components and a part of experimental facilities. Shin'ya Sawada @ Hadron Structure at J-PARC

  5. Construction Schedule & Commissioning (Phase-1) Shin'ya Sawada @ Hadron Structure at J-PARC

  6. Scenes of Construction Shin'ya Sawada @ Hadron Structure at J-PARC

  7. Performance of the 50-GeV PS Numbers in parentheses are ones for the Phase 1. • Beam Energy: 50GeV (30GeV for Slow Beam) (40GeV for Fast Beam) • Repetition: 3.4 ~ 5-6s • Flat Top Width: 0.7 ~ 2-3s • Beam Intensity: 3.3x1014ppp, 15mA (2×1014ppp, 9mA) ELinac = 400MeV(180MeV) • Beam Power: 750kW (270kW) Shin'ya Sawada @ Hadron Structure at J-PARC

  8. Scenes of Construction • 50 GeV Area Shin'ya Sawada @ Hadron Structure at J-PARC

  9. Neutrino Facility- Fast Extracted Beam - Shin'ya Sawada @ Hadron Structure at J-PARC

  10. T2K (Tokai-to-Kamioka) Neutrino Experiment • Status of n oscillation and neutrino mass: • Atmospheric n experiments (SK…) discovered neutrino oscillation and thus finite masses of neutrinos. • K2K nm disappearance experiment confirmed the existence of the neutrino oscillation with “man-made” neutrinos. Super-K: 50 kton Water Cherenkov ~1GeV nm beam (100 of K2K) J-PARC 0.75MW 50GeV PS Phase2: Hyper-K? Phase2: 4 MW ? • Motivations of T2K (Tokai to Kamioka): • Precise measurement of disappearance nm to nx. • Discovery of ne appearance: High flux of nm enables us to observe it. • Flux (nm) at the 50 GeV PS > 100 x Flux (nm) at KEK 12 GeV PS • Future upgrade … towards CP violation in the lepton sector Shin'ya Sawada @ Hadron Structure at J-PARC

  11. Neutrino Facility • inward beam extraction • proton line with SC combined- function magnets • variable off-axis angle between 2-3 degrees • 130m long decay section • a near detector at 280 m • another detector planned at 2km Shin'ya Sawada @ Hadron Structure at J-PARC

  12. Super-K. Decay Pipe q Target <= On axis Off-axis Beam Horn Osc. Prob.=sin2(1.27Dm2L/En) Dm2=3x10-3eV2 L=295km • WBB (q=0) with an intentionally misaligned • beam line from the detector axis • ==> Quasi monochromatic beam • with higher Intensity than NBB osc.max. OA0° OA2° nm flux @ SK OA2.5° OA3° Shin'ya Sawada @ Hadron Structure at J-PARC En

  13. Hadron Physics Facility- Slow Extracted Beam - Shin'ya Sawada @ Hadron Structure at J-PARC

  14. Slow Extraction Beamline (Phase 1) NP-HALL 56m(L)×60m(W) 50-GeV PS A-Line Switch Yard Split Point 2% Loss T1 Target 30% Loss T0 Target 0.5% Loss Beam Dump 750kW Shin'ya Sawada @ Hadron Structure at J-PARC

  15. Hadron Hall Shin'ya Sawada @ Hadron Structure at J-PARC

  16. Ttarget disk 5.4cm Thick 50cm Diam. T1 Target R&D(by Yamanoi) ~18m ~10m Cooling water 2m Water pump Beam Beam

  17. Residual Dose 30Days Operation/1Day Cooling 1Year Operation/Half Year Cooling Concrete 7.9 mSv/h 0.03mSv/h Water Pipe (SUS) 8.4 mSv/h 2.4 mSv/h Concrete 5.3 mSv/h 1.6mSv/h Service Space Iron 60 mSv/h 11mSv/h Vacuum Duct SUS 3.2 Sv/h 1.2 Sv/h Ti1.1 Sv/h 97 mSv/h Iron 430 mSv/h 160mSv/h Iron 1.1 mSv/h 460 mSv/h 5m q1B 110 mSv/h 49 mSv/h Iron 170 mSv/h 460mSv/h Beam Collimator 710 mSv/h 420 mSv/h T1 Vessel 2.2 Sv/h 850 mSv/h Trench T1 Target 650 Sv/h 230 Sv/h Vacuum Seal 30 Sv/h 11 Sv/h Collimator 380 mSv/h 100 mSv/h Iron Base 560 mSv/h 210 mSv/h D1 530 mSv/h 270 mSv/h Q1 62 mSv/h 33 mSv/h Shin'ya Sawada @ Hadron Structure at J-PARC

  18. Upstream of Secondary Beam Lines How to solve 200kW Heat Problem? Magnets → Upstream Collimator Beam Ducts → Big Vacuum Chamber instead of Ducts Vacuum Chamber D1(7.2kW) Q1(<1kW) K1.8 Ni target (10kW) 2.4m Beam Dump Cu collimator (55kW) Cu collimator (76kW) 2.9m KL Shin'ya Sawada @ Hadron Structure at J-PARC K1.1

  19. Big Vacuum Chamber Vacuum Chamber Service Space Concrete Block • Shield blocks are also • inside the vacuum chamber. • Each magnet/collimator • has module structure • unified with shield blocks. • Chamber lid is at the • service space level. • Electric power and cooling • water are provided from • the service space. Iron Block 5m Magnet Beam Collimator T1 Target Shin'ya Sawada @ Hadron Structure at J-PARC

  20. Phase 1 Phase 2 Phase 3 50m Beam Dump: Traveling to 50m downstream for Phase 2 • 1000ton(Full Weight including Core, Shield, Cooling---) • Traveling should be completed within 1 day (eight hours) beam Shin'ya Sawada @ Hadron Structure at J-PARC

  21. Service space Concrete 9.5m Fe Cu 9m Proton beam 6m BeamDump • 750kW Heat/Radiation Load • Movable! (背面図) (正面図) Shin'ya Sawada @ Hadron Structure at J-PARC

  22. Heat analysis by MARS & ANSYS(calculated by A. TOYODA & M. MINAKAWA) • 無酸素銅 • ρ=8.9[g/cm3] • 熱伝導率390 [W/m/K] Fe:1050mm 3000mm Cu:6900mm 1000mm 6300mm Tmax:202℃ ビーム入口Φ350mm Proton beam 熱伝達係数:1000W/m2・K Proton beam 50GeV-15mA (750kW) Shin'ya Sawada @ Hadron Structure at J-PARC

  23. Maintenance Maintenance Space Water Manifold Ex. Duct Vacuum Exhaust Pillow Seal Shin'ya Sawada @ Hadron Structure at J-PARC

  24. beam Structure of traveling devices Complete remote operation with just LAN Cable! 電源・油圧ユニット Shin'ya Sawada @ Hadron Structure at J-PARC

  25. K1.8 and K1.8BR SKS+ SPES-II FF ES2 MS2 TG-window ES1 MS1 IF-window Shin'ya Sawada @ Hadron Structure at J-PARC

  26. K1.1/0.8 Beam Line (S-Type) and KL T1 IF ES1 ES2 MS1 MS2 C-Type FF Shin'ya Sawada @ Hadron Structure at J-PARC

  27. Beamline Parameters \ MS1 opening: ±1mm, MS2: ±2mm # using Sanford-Wang formula, assuming 1pulse=3.53s(0.7s flat top) $ Cloud p are not taken into account.

  28. Construction Schedule: 2004(H16) KH:2006(H18) 2005(H17) n:2008 (H20) SY:2005(H17) 2003(H15) 2006(H18) Magnets etc. at NP-Hall:2007(H19) Magnets etc. at SY:2006(H18) The first Beam to NP-Hall:2008(H20) Shin'ya Sawada @ Hadron Structure at J-PARC n-Beam:2009(H21)

  29. Dates of Remember • April 2005: We can start recycling magnets! • January 2005 : K2K shut down • December 2005 : KEK-PS shut down. The most of Hadron Hall construction team should take care of external beam lines of the KEK-PS until then. • March 2006: We can start SY settings & The most magnets should be ready until then! • March 2007: We can start Hadron Hall settings. • Jan. 2008 (Nov. 2007?): Start of 50GeV-PS commissioning! • Sept. 2008: The construction should be completed (officially) & The First External Beam! Shin'ya Sawada @ Hadron Structure at J-PARC

  30. Recycling of ν-line Magnets Shin'ya Sawada @ Hadron Structure at J-PARC

  31. Magnet Recycling in the Matching Section VEP QFP in 3.75°Bend -3.75°Bend h03 h01 q01 q02 q03 q04 q05 h05 v02 v04 7040 v06 4C220(KEK-EP2) 6D220,QC1,QC2(K2K/TRISTAN) 18D72(SLAC) Plan View 50-GeV BM (Proto-type) Shin'ya Sawada @ Hadron Structure at J-PARC

  32. Magnet Collection ProjectThe Latest Contribution for High-p Beamline 18D72 Magnet from FNAL/ANL ~4Tm, 150mm Gap, 40mm Pole Width Shin'ya Sawada @ Hadron Structure at J-PARC

  33. Summary • Neutrino Facility • Fast extracted beamline. • Expect first beam in 2009. • Hadron Facility • Slow extracted beamline. • Expect first bean in 2008. • At the day-1, we will have one primary beamline, one production target, and one secondary beamline. • Other beamlines are under consideration. • The hadron hall should be extended to the downstream in the (near) future. Shin'ya Sawada @ Hadron Structure at J-PARC

More Related