1 / 10

IPv6 “ Stateless ” Resolver Autoconfiguration

IPv6 “ Stateless ” Resolver Autoconfiguration. Dave Thaler dthaler@microsoft.com. What DDDT recommended. Use “other stateful config” bit = OFF to enable the following Use IPv6 anycast to get server list, domain name, and search path Use DNS for the payload format

cosmo
Download Presentation

IPv6 “ Stateless ” Resolver Autoconfiguration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IPv6 “Stateless”Resolver Autoconfiguration Dave Thaler dthaler@microsoft.com

  2. What DDDT recommended • Use “other stateful config” bit = OFF to enable the following • Use IPv6 anycast to get server list, domain name, and search path • Use DNS for the payload format • See if SRV records would work • If not, try TXT or new record type • Keep to only 1 message exchange

  3. Summary of Interim Meeting • Presented a strawman SRV record approach • Got general agreement on how queries work • can have per-site default information • can have subnet-specific overrides • Some people didn’t like creative use of SRV • Server list, domain name, and search path were encoded as targets with separate “dnsinfo” ports • Feedback: go ahead and try TXT or new record instead

  4. Current Status • Document split into two pieces: • DDDT discussion of solution space • draft-ietf-ipngwg-dns-discovery-analysis-00.txt • Type: Informational • Single solution details • draft-ietf-ipngwg-dns-discovery-02.txt • Type: Standards track • This version specifies TXT records

  5. TXT Record Basics • Summary: • Specified in RFC 1464 • <attributename>=<attributevalue> pairs • Works with existing DNS servers • Example: • host.widgets.com IN TXT “printer=lpr5”

  6. Specifying resolver config info • DNS Server list: • “dnsservers=<address>[,<address>]*” • Domain name: • “domainname=<domain>” • Search path: • “searchpath=<domain>[,<domain>]*”

  7. “Owner” strings for records • Basically what was discussed in Seattle • <subnet>.<well-known-suffix> • Allow site-wide defaults *._dnsinfo IN TXT “domainname=example.com” • Allow per-subnet overrides fec0_0000_0000_0001._dnsinfo IN TXT “domainname=foo.example.com”

  8. Autoconfiguration Process • Select an on-link prefix a) Any site local prefix (if present), then b) Any global prefix (if present), then c) Link-local prefix (last resort) • Convert to lower-case literal with ‘_’ rather than ‘:’, and no zero compression • Send a query for all TXT records using <subnet>.<well-known-suffix>

  9. Questions • Is this a reasonable approach? • What well-known-suffix? _dnsinfo.local.arpa? _dnsinfo? Other?

  10. Other open issues • Separate mDNS config from search path? • draft-guttman-dhc-mdns-enable-01.txt • “mdnsenable=…” • Separate stateful config bit in RA’s? • Could you use this to get DNS info, but DHCPv6 for yet other stateful config?

More Related