1 / 6

Using Holding Clamps and Magnetic Ground When Welding

Whether you should use magnetic welding grounds and clamps by addressing the advantage and disadvantage of their durability concerns, use, equipment cost, and some potential alternatives, this article is aimed at providing answers to the question.

climemagnet
Download Presentation

Using Holding Clamps and Magnetic Ground When Welding

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Using Holding Clamps and Magnetic Ground When Welding http://www.climemagnet.com/

  2. Whether you should use magnetic welding grounds and clamps by addressing the advantage and disadvantage of their durability concerns, use, equipment cost, and some potential alternatives, this article is aimed at providing answers to the question. Magnetic Welding Grounds and Clamps There are many advantages to using Magnetic Welding Holder, magnetic welding grounds, and clamps. Why magnetic welding ground and clamps were invented in the first place most of them point back to the reason: for added convenience.

  3. Pro: It becomes much more convenient to weld towards the middle of circular steel, square, large structural, or rectangular pipe. A magnetic welding ground makes grounding your weld In the case of welding on an oversized workpiece such as pipe, – in some instances – possible. Pro: welding productivity is increased by Using magnetic grounds and clamps instantly. Magnetic grounds and clamps allow the user to simply stick a magnet onto the surface of the work piece and start welding instead of twisting traditional screw-type clamps out and in.

  4. Pro: when welding sheets of metal, Magnetic clamps are worth their weight in gold which needs to be constrained in a perpendicular orientation without any elaborate fixtures or jigs. In the corner of the hold and joint the workpiece securely a magnetic clamp can simply stick to the metal. Pro: grounding becomes easier or even possible in applications where you are welding on a workpiece which has only a portion of the base metal exposed (such as in an automotive repair shop where in a certain area a body panel is taken down to bare metal only).

  5. Pro: Wedges and dogs are used for sheet metal fit-ups using Industrial Magnet can decrease cost. Costs can be decreased in labor simply by using an optimized magnetic work holding solution. If you need assistance or if you have either determined that you need magnetic equipment for your welding application, it is strongly recommended to visit your local welding store deciding on this type of equipment.

  6. Address: NO.1975 JIANNAN ROAD, NINGBO State: Country: CHINA Zip: 315040 Contact email id: info@climemagnet.com Phone No. : +86-574-27903196 Fax: +86-27-63499779 http://www.climemagnet.com/industrial-magnets.htm

More Related