1 / 9

The Balloon Car Lab

The Balloon Car Lab. I. Introduction. State the difference between velocity and speed and explain how they will be measured in this lab. State the definition for acceleration and how it will be determined in this lab. Briefly summarize your group plan to build the car. II. Materials.

chilton
Download Presentation

The Balloon Car Lab

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Balloon Car Lab

  2. I. Introduction • State the difference between velocity and speed and explain how they will be measured in this lab. • State the definition for acceleration and how it will be determined in this lab. • Briefly summarize your group plan to build the car

  3. II. Materials • 1 balloon • Wooden skewers • Straws • Material for body (Styrofoam plates, index card etc….) • Dixie cups (wheels) • Tape, hot glue, rubber band etc…. • Add materials as you use them

  4. III. Procedure/Daily Log

  5. III. Procedure cont… • Diagram A: Refer to the attached diagram of your car on a separate sheet of unlined paper. • Diagram must have all parts/modifications labeled clearly with name of part and function for car performance • Ex. Balloon: Acts as the motor/power for vehicle

  6. IV. Results: Table A

  7. IV. Results: Table B

  8. IV. Results cont… • Save room for your calculations here

  9. V. Conclusion • Save room for your conclusion here

More Related