slide1 n.
Skip this Video
Loading SlideShow in 5 Seconds..
ELEC 412 RF & Microwave Engineering PowerPoint Presentation
Download Presentation
ELEC 412 RF & Microwave Engineering

Loading in 2 Seconds...

  share
play fullscreen
1 / 9
Download Presentation

ELEC 412 RF & Microwave Engineering - PowerPoint PPT Presentation

chilton
199 Views
Download Presentation

ELEC 412 RF & Microwave Engineering

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. ELEC 412 RF & Microwave Engineering Fall 2004 Lecture 14

  2. Lumped Parameter Band-Pass Filter Design Design an N=3 band-pass maximally flat (Butterworth) filter with a center frequency of 900 MHz. The Bandwidth of the filter is 20% ; That is, BW = (0.20)(900 MHz) = 1.8 MHz or 0.9 MHz. From the Maximally Flat Low Pass Prototype Table 5-2, g0 = g4 = 1, g1 = g3 = 1, g2 = 2

  3. Low Pass Prototype Filter Where the normalized center frequency is c = 1, L = 1.1(2·900 MHz), and U = 0.9(2·900 MHz) So that U - L = 1.13Grad/s and

  4. Finding the Filter Components

  5. Filter Simulation with Ansoft Designer

  6. Filter Simulation with Ansoft Designer

  7. Some Observations On The Results • Values of components are unreasonable • Some other method for implementing the filter design goals must be found • Solution: Use distributed filters using waveguides • Richardson Transforms and Kuroda’s Identities

  8. Richards Transformation: Lumped to Distributed Circuit Design

  9. Kuroda Transforms