1 / 8

MicroSim pspice

MicroSim pspice. Pspice 設計流程. 畫電路圖 . 更改元件值 . 加入測試點 . 設定分析項目 執行模擬 SIMULATION . 在示波器視窗中加入軌跡. Connection. Reference. Value. Part. V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable. Step 1. 畫電路圖.

chantellea
Download Presentation

MicroSim pspice

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MicroSim pspice

  2. Pspice設計流程 • 畫電路圖. • 更改元件值. • 加入測試點. • 設定分析項目 • 執行模擬SIMULATION. • 在示波器視窗中加入軌跡.

  3. Connection Reference Value Part V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Step 1.畫電路圖 • A part is a basic circuit element, such as a resistor or power source. • Each part is associated with a part name and is stored in a library.

  4. Connection Reference Value Part V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Step 2:接線 Connections • Connections are made primarily by wire segments and bus strips.

  5. Connection 參考名稱References Value Part V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Step 3:參考名稱References • References are unique names for parts. Unlike the generic part names (such as VDC and R) • references are different for each instance of the same part.

  6. Connection Reference Value Part V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Step 4: 元件數值Values • Valuesgive the magnitude of each part instance. • A name can be associated with each value.

  7. Connection Reference Value Part V1=10V R1=1K GND_EARTH Analysis/Setup/Bias Point Detail Analysis/Display Result on Schematic/Enable Step 5:模擬(Run simulation)

  8. 模擬結果輸出檔案Output file Each time Pspice performs an analysis it automatically generates an output file. Netlist field. * Schematics Netlist * V_V1 $N_0001 0 10V R_R1 0 $N_0001 1K Alias Field. * Schematics Aliases * .ALIASES V_V1 V1(+=$N_0001 -=0 ) R_R1 R1(1=0 2=$N_0001 ) .ENDALIASES Small signal bias solution. **** SMALL SIGNAL BIAS SOLUTION TEMPERATURE = 27.000 DEG C NODE VOLTAGE NODE VOLTAGE NODE VOLTAGE NODE VOLTAGE ($N_0001) 10.0000 VOLTAGE SOURCE CURRENTS NAME CURRENT V_V1 -1.000E-02 TOTAL POWER DISSIPATION 1.00E-01 WATTS

More Related