1 / 15

RV10 - Riveting Manual

RV10 - Riveting Manual. Dalia Margarita Gallaga 784420 Fernando Vargas Carmona 506099 Víctor Ángeles Pérez 610252. Getting Started. Remove Thin Film Smothing Edges. Getting Started. Sanding Measuring . Getting Started. Drilling with Standard (inches).

chakra
Download Presentation

RV10 - Riveting Manual

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. RV10 - Riveting Manual Dalia Margarita Gallaga 784420 Fernando Vargas Carmona 506099 Víctor Ángeles Pérez 610252

  2. Getting Started • Remove Thin Film • Smothing Edges

  3. Getting Started • Sanding • Measuring

  4. Getting Started • Drilling with Standard (inches) * To avoid sliding, slowly place the drill over the aluminum sheet and manually turn the reel so it creates a small notch. Do not use a striker pin.

  5. Getting Started • Countersinking * Always Contersink clockwise

  6. Clecos • The clecos should be placed starting from the middle and ending at the sides.

  7. Getting started • Drilling with Aeronautical Standard ( Decimal )/Cleco

  8. Getting Started • Dimpling • Using a mechanical piston • Using the Dimpling Clamp

  9. Getting Started • Pneumatic Countersinking * Alternate procedure for dimpling in places in which this procedure is not the best option due to the sheet’s width.

  10. Riveting * Choose specific die **  Not recommended X Not Applicable.

  11. Clamp Riveting

  12. Back Riveting

  13. Riveting

  14. Pop rivet puller

  15. Verification

More Related