1 / 5

Keseimbangan Panas

Keseimbangan Panas. Heat balance calculations are treated in the same manner as material balances. The amount of heat entering a system must equal the amount of heat leaving a system, or: Heat in = heat out + accumulation

Download Presentation

Keseimbangan Panas

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Keseimbangan Panas

  2. Heat balance calculations are treated in the same manner as material balances. • The amount of heatentering a system must equal the amount of heat leaving a system, or: • Heat in = heat out + accumulation • At a steady state, the accumulation term is zero and heat entering the system must equal what leaves the system. • Heat balance problems are facilitated by using diagrams that show process streams bringing heatand taking heat out of a system.

  3. Calculate the amount of water that must be supplied to a heat exchanger that cools100 kg/h of tomato paste from 90◦C to 20◦C. The tomato paste contains 40% solids. The increasein water temperature should not exceed 10◦C while passing through the heat exchanger. There is nomixing of water and tomato paste in the heat exchanger.

  4. T1 Inlet temperature = 20◦C, and T2 = exit water temperature = 20 + 10 = 30◦C. • Let 20◦C be the referencetemperature for enthalpy calculations. • The specific heat of water = 4187 J/(kgK), and • tomato paste, Cavg = 3349(0.6) + 837.36 = 2846.76 J/(kg K) • Heat content of entering tomato paste: • q1 = (100 kg) [2846.76 J/(kg K)](90 − 20) K= 19.927 MJ • Heat content of tomato paste leaving system: • q2 = 100kg[2846.76 J/(kg K)](20 − 20) K = 0 • Let W = kg water entering the system • q3 = Wkg[4187 J/(kg K)](20 − 20) K = 0 • q4 = heat content of water leaving the system • = Wkg [4187 J/(kg K)](30 − 20) K = 41, 870(W) J • The heat balance is • q1 + q3 = q2 + q4 • Because q2 and q3 = 0, q1 = q4, and: heat loss by the tomato paste = Heat gain by water

  5. Type heat transfer • Liquids can be made to flow in either the same direction or in opposite directions in aheat exchanger. • Counter-current flow of fluids has a higher heat transferefficiency than co-current (or ‘parallel’) flow and is therefore widely used in heatexchangers. • However, the temperature difference varies atdifferent points in the heat exchanger and it is necessary to use a logarithmic mean temperature difference in calculations

More Related