1 / 1

Drill Press Cutting Tool Operating Instructions

Drill Press Cutting Tool Operating Instructions<br>For More Details Please Visit: http://www.carterbearings.co.uk/aerospace-bearing-tools/aerospace-bearing-tool-visual-guides/

Download Presentation

Drill Press Cutting Tool Operating Instructions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ?????????????????????????????????????????? Set-up Instructions 1) 2) 3) Install cutting tool into drill press chuck or vertical milling machine Prior to starting the spindle rotation bring the cutter down and ensure the workpiece is aligned correctly to cut the V-groove Bring the cutter down until it contacts the edge of the bearing, set the spindle stop so it will let the cutter only cut .025-.035 below the initial contact point Adjust spindle speed - recommend approximately = 160 Rpm divided by the Bearing OD. 4) Operating instructions 1) 2) Position part (sub-assembly ? bearing & housing) on the flat surfaced locating fixture in bearing bore. With part resting securely on locating fixture slowly lower the spindle ? ensuring Cutter bushing is piloted into the bearing bore. Apply cutting oil to the edge of the bearing. Start the spindle and apply gentle pressure at first so the teeth start cutting the bearing, continue to increase pressure and alternate between cut and lift. Frequently check the cut depth. Do not try and force the spindle or try push past the contact stop. Release pressure and withdraw tool from bearing/housing sub-assembly. 3) 4) 5) UNASIS International Limited Tel: +44 (0) 1235 527 770 sales@unasisbearings.com

More Related