1 / 4

pump fabrication – day 1

living with the lab. pump fabrication – day 1. group B will make their pump. group A will draw their pump. living with the lab. faceplate. impeller (your own design). g roup A : SolidWorks modeling. measure & draw a screw

carlotta
Download Presentation

pump fabrication – day 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. living with the lab pump fabrication – day 1 group B will make their pump group A will draw their pump

  2. living with the lab faceplate impeller(your own design) group A: SolidWorks modeling • measure & draw a screw • measure & draw a barbed fitting (don’t worry about screw threads & intricate details) • measure & draw the motor • complete your assembly in Solidworks other parts & pump assembly pump body

  3. living with the lab group A: robot challenge • work on the robot challenge after finishing the SolidWorks assembly (if time permits) • solder photoresistors or complete other robot work • work on programming (move a mat to your table)

  4. living with the lab group B: make your pump • don’t start until you receive safety training from your instructor • turn in signed safety quizzes after training • follow directions on the PowerPoint presentation • if you are unsure of something, then ask for help

More Related