1 / 12

USB DMR Installation Instructions

USB DMR Installation Instructions. After installing the programming cable to the radio and plugging the USB connector end to the computer USB port, then power up the radio . The following message will appear. Choose “ Install from a specific location” & click [Next].

carla-reed
Download Presentation

USB DMR Installation Instructions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. USB DMR Installation Instructions

  2. After installing the programming cable to the radio and plugging the USB connector end to the computer USB port, then power up the radio. The following message will appear. Choose “Install from a specific location” & click [Next].

  3. Select the “Search for the best driver in these locations” option, & click [BROWSE]

  4. If the following message appears, just press “Continue Anyway” to proceed with installation process.

  5. Browse for the folder that contains the Hytera DMR files that you downloaded and expand it. Select the file usb_driver within the NA2 folder & press [OK].

  6. Now click [NEXT]

  7. If the following message appears, just press “Continue Anyway”.

  8. From within the Hytera DMRX82 CPS 1.00.00.0233 folder, Select the NA2 folder.

  9. Within NA2 you will find 3 files. Select and open the usb_driver folder.

  10. The above should be what your are looking at on your screen , click [OPEN].

  11. At this time you should only need to press [OK]. If for some reason it does not respond, select [BROWSE] and select the USBBulk file.

  12. After installation, the above screen should indicate that the USB driver has been installed successfully. If you have any further questions, please contact support@hytamerica.com.

More Related