1 / 9

Rough Opening for 32-Inch Pocket Door – Complete Sizing Guide

The rough opening for a 32-inch pocket door should be approximately 66 inches wide and 84 inches tall. This allows enough room for the door panel, track, and frame to be properly installed and operate smoothly. Always verify with the specific pocket door kit instructions, as dimensions may slightly vary based on manufacturer or door style.

camilaadams
Download Presentation

Rough Opening for 32-Inch Pocket Door – Complete Sizing Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rough Opening for 32-Inch Pocket Door – Complete Sizing Guide

  2. Why Choose Pocket Doors? Space-Saving Enhanced Design Pocket doors slide into the wall, maximizing space and ideal for smaller rooms. Pocket doors create a sleek and modern look, adding elegance to any room.

  3. Pocket Door Dimensions Door Width Frame Depth The rough opening for 32 pocket doorThis is the dimension of the door itself, not the rough opening. The pocket door frame will add an extra 4" to the opening for the door to slide into. Rough Opening Allowance Add 1.5" to the total width for framing and clearance.

  4. Framing the Opening Measure Twice Carefully measure and mark the location for your opening. Cut and Install Cut studs to the correct length and install them around the opening. Secure Framing Ensure that the framing is sturdy and plumb to support the door frame.

  5. Preparing the Wall Remove Drywall 1 Carefully cut and remove drywall to create the opening for the pocket door frame. Install Blocking 2 Install blocking around the opening to provide extra support for the pocket door frame.

  6. Installing the Pocket Door Frame Level and Square Secure Framing Ensure that the door frame is level and plumb before securing it. Use screws to attach the frame to the surrounding blocking and studs.

  7. Hanging the Pocket Door Install Rollers 1 Attach the rollers to the top of the pocket door. Guide the Door 2 Carefully guide the door into the frame, making sure it aligns correctly. Adjust and Test 3 Adjust the rollers as needed and test the smooth operation of the door.

  8. Finishing Touches Install Trim Hardware Final Inspection Install trim around the pocket door opening for a seamless look. Install the door handle and any other necessary hardware. Inspect the finished installation for any imperfections or areas needing adjustment.

  9. Contact Us Email: Lmesa@askmodern.com Phone: 888-308-9778 Address: 3727 N.W. 41 St Miami , FL 33142, Florida, United States Website: www.modernpocketdoors.com

More Related