1 / 19

Workshop: First look, Calibrations & RV standard IAP-05-11-24

Workshop: First look, Calibrations & RV standard IAP-05-11-24. Presentation of the Spectroscopic Global Iterative Solution The operations of SGIS Prototype & Perspectives of SGIS. An example of calibration: The wavelength calibration. Antoine Guerrier GEPI.

cameo
Download Presentation

Workshop: First look, Calibrations & RV standard IAP-05-11-24

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Workshop: First look, Calibrations & RV standard IAP-05-11-24 • Presentation of the Spectroscopic Global Iterative Solution • The operations of SGIS • Prototype & Perspectives of SGIS An example of calibration: The wavelength calibration Antoine Guerrier GEPI

  2. 1. Presentation of the SGIS concept IAP-05-11-24 1. The presentation ofthe Spectroscopic Global Iterative Solution (SGIS)

  3. 1.1. Problematic IAP-05-11-24 • No on-board calibration device (e.g. calibration lamp) • No specific observation for the calibration • Not possible to compare to an “instrumental” reference source • Need an alternative calibration method • Possible alternative • The Spectroscopic Global Iterative Solution (SGIS) • = Wavelength self-calibration of the RVS

  4. 1.2. The reference sources IAP-05-11-24 • Idea = Use sources observed by the RVS instrument • Use reference sources (i.e. bright and stable stars) • How many sources usable for the wavelength calibration? • About 5.104 F8GK sources V<10 (about 4,6.105 V<12) (GEPI/GAIA-RVS/TN/017.01) • About 80 epochs per star • Measure the evolution of the instrument with its own observations: Large number of stable reference sources + Same evolution of the characteristics of the reference sources = Evolution of the characteristics of the instrument

  5. 1.3. Analogy IAP-05-11-24 • How to use the reference sources observed? • By analogy with the ground-based observations: • Classical ground-based spectrograph • Use “reference lines”: • Known wavelengths in the laboratory reference frame • from a calibration lamp • SGIS approach • Use stellar reference lines: • Known wavelengths, little blended and identified in the spectra of the reference sources collected by the RVS

  6. 1.4. An iterative process IAP-05-11-24 • Position of stellar reference lines depend upon 2 parameters: • the radial velocity of the sources (RV) • the spectral dispersion law of the instrument • RV & Spectral dispersion law linked • RV & Spectral dispersion law have to be determined: • Derivation of the RV: • Wavelength calibrations used to calibrate raw spectra • Calibrated spectra used to derive RV • Calibration of the wavelength scale: • RV used to shift wavelengths of reference lines • Reference lines used to compute wavelength calibrations • An iterative approach is needed • Each iteration refine the RV & calibration data

  7. 1.5. Non iterative steps of SGIS IAP-05-11-24 • Initialisation step: • - Starting point of the iterative process • - Initialize spectral dispersion law with: • Ground calibrations or commissioning calibrations or calibrations from first look • Zero point correction step: • - N+1 iteration of the SGIS • - RV expressed in relative reference frame • - To be usable, RV should be expressed in absolute reference frame • (e.g. barycentre of the Solar System) • - Ground-based standards used to derive relative-to- absolute reference frame transformations • - Transformations = Zero point corrections

  8. 1.6. The scheme of SGIS IAP-05-11-24 INITIALIZATION SOURCE UPDATING  e.g. Radial Velocities REFERENCE SELECTION  Bright and stable stars Iterative processes CALIBRATION UPDATING  e.g. l-Pixel Relation ZERO POINT

  9. 2. The operations of SGIS IAP-05-11-24 2. The main operations of SGIS

  10. 2.1. The Source Updating step IAP-05-11-24 • First iterative step of the SGIS • Derivation of the Radial Velocity of the sources • by a classical cross-correlation algorithm: • Select a template spectrum (rest synthetic spectrum) • Apply wavelength calibrations on the raw spectrum • Shift the template spectrum according to a RV range • Compute cross-correlation coefficient between template & calibrated spectrum • Compute the maximum of the cross-correlation coefficients • Maximum of cross-correlation coefficients • = Best match between template & calibrated spectra • = RV of the source • The RV of the source Updated

  11. 2.3. The Reference Selection step IAP-05-11-24 • Selection of the reference source used in wavelength calibration • Reference source should be: • Stable in radial velocity • Of appropriate stellar type (i.e. about 20 lines unblended or little blended) • Check, source by source, the astrophysical characteristics of the source • Qualify or reject as a reference

  12. 2.4.1 The Calibration Updating step IAP-05-11-24 • Calibrate the RVS spectral dispersion law: • associate a mean wavelength to any sample • Wavelength dispersion law assumed constant over interval of time • Calibration units • Function F constrained for each calibration unit

  13. 2.4.2 The Calibration Updating step - Prototype example IAP-05-11-24 • 2 simplifying assumptions: • FoV-to-focal-plane transformations constant over duration of calibration unit • Same constant velocities in the FoV for each source • Mean-central-wavelength-to-sample function F expressed as function of FoV coordinates at the readout time of the sample: • Function F represented by a 2nd order polynomial fit • Wavelength calibration = Compute Cmnfor each calibration unit

  14. 3. Prototype & Perspectives of SGIS IAP-05-11-24 3. Prototype & Perspectives of SGIS

  15. 3.1. The implementation of SGIS IAP-05-11-24 Data model Tools SGIS processing math spectrogis instrument initializing sourceUpdating sourceObs referenceSelection calibrationUpdating auxiliary control Test & Performance • JAVA development of the first version of the SGIS prototype • Test of non-divergence of the prototype: • Initializing the spectral dispersion law with the true values • Over 100 days of mission • With 1000 G5V stars (same charact., e.g. RV = 0km/s) • With 10 epochs per star

  16. 3.2. The diagnostics of errors IAP-05-11-24 initialization source-Updating reference-Selection calibration-Updating Wavelength calibration diagnostic Wavelength calibration diagnostic Centroïding diagnostics RV diagnostics Wavelength calibration diagnostic • Assess the behaviour & performance of the prototype

  17. 3.3.1 Results - Iteration 1 IAP-05-11-24

  18. 3.3.2 Results - Iteration 2 IAP-05-11-24

  19. 3.4. Conclusions & Perspectives IAP-05-11-24 • 1000 observations per calibration unit = Accuracy < 1km.s-1 • The first series of tests • Tests of non-divergence of the prototype (true spectral law) • Results: divergence • Problems localized! • Non-symmetric profiles of reference lines in the spectra • Centroiding degradation in the Calibration Updating • Solution: calibrate the centroiding method • New series of tests to valid the non-divergence of the prototype • Test of convergence: • Not initialize the spectral dispersion law with true values • Observe the behaviour of the prototype over iterations • GEPI/GAIA-RVS/TN/018 coming soon!

More Related