1 / 36

DRILLS AND DRILLING PROCESSES

DRILLS AND DRILLING PROCESSES. DRILLS AND DRILLING PROCESSES. Introduction Types of Drill presses Portable Drilling Machine Sensitive Drilling Machine Upright Drilling Machine – Round column section or pillar and Box column section Heavy duty Drilling Machine. DRILLS AND DRILLING PROCESSES.

cai
Download Presentation

DRILLS AND DRILLING PROCESSES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DRILLS AND DRILLING PROCESSES

  2. DRILLS AND DRILLING PROCESSES • Introduction • Types of Drill presses • Portable Drilling Machine • Sensitive Drilling Machine • Upright Drilling Machine – Round column section or pillar and Box column section • Heavy duty Drilling Machine

  3. DRILLS AND DRILLING PROCESSES • Radial Drilling Machine • Gang Drilling Machine • Multiple – drill head Drilling Machine • Tape Controlled Drilling Machine

  4. DRILLS AND DRILLING PROCESSES

  5. DRILLS AND DRILLING PROCESSES • Work Holding Attachments and Accessories • Drill – press vice • Drill jigs • Angle plates • V – blocks • T – bolts, Clamps and step blocks

  6. DRILLS AND DRILLING PROCESSES

  7. DRILLS AND DRILLING PROCESSES

  8. DRILLS AND DRILLING PROCESSES

  9. DRILLS AND DRILLING PROCESSES

  10. DRILLS AND DRILLING PROCESSES

  11. DRILLS AND DRILLING PROCESSES

  12. DRILLS AND DRILLING PROCESSES

  13. DRILLS AND DRILLING PROCESSES

  14. DRILLS AND DRILLING PROCESSES

  15. DRILLS AND DRILLING PROCESSES • Cutting Tool • Flat or Spade drill • Straight fluted drill • Twist drill • Parallel shank – short series • Parallel shank – stub series • Parallel shank – long series • Taper shank • Taper shank core drill • Oil tube drill

  16. DRILLS AND DRILLING PROCESSES

  17. DRILLS AND DRILLING PROCESSES

  18. DRILLS AND DRILLING PROCESSES

  19. DRILLS AND DRILLING PROCESSES

  20. DRILLS AND DRILLING PROCESSES

  21. DRILLS AND DRILLING PROCESSES

  22. DRILLS AND DRILLING PROCESSES

  23. DRILLS AND DRILLING PROCESSES

  24. DRILLS AND DRILLING PROCESSES

  25. DRILLS AND DRILLING PROCESSES • Geometry of drill bits • Axis – Body – Chisel edge – Face – Flank – Flutes – Heel – Lands – Lip – Neck – Shank – Tang • Chisel edge angle – 120 to 135 • Helix angle or rake angle – 30 • Point angle – 118 • Lip clearance angle – 12

  26. DRILLS AND DRILLING PROCESSES • Grinding of drill bits • Operations • Drilling • Reaming • Countersinking • Counterboring • Lapping

  27. DRILLS AND DRILLING PROCESSES

  28. DRILLS AND DRILLING PROCESSES

  29. DRILLS AND DRILLING PROCESSES

  30. DRILLS AND DRILLING PROCESSES • Cutting Speed • v = (π D N)/ 1,000 mpm • D – diameter of drill in mm • N – rpm of the drill spindle

  31. DRILLS AND DRILLING PROCESSES • Safety • Work should not be held by hand • Hair cut short, wear a cap, short sleeves, no neck ties, no rings or a wrist watch • Dull drill can cause an accident

  32. DRILLS AND DRILLING PROCESSES • Use correct tool to release a taper shank drill from drilling m/c – drill drift • Stop the m/c before measuring or adjusting • Stop m/c before removing chips and excess coolant

  33. QUESTIONS? THANK YOU!

More Related