1 / 18

Modems

Modems. Chapter 17. Modems are little devices to use the telephone to talk to other computers. Modem is an abbreviation for Modulator/ Demodulator Modems can be internal or external. Basic Knowledge. Modem Signals.

burton-wood
Download Presentation

Modems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Modems Chapter 17

  2. Modems are little devices to use the telephone to talk to other computers. • Modem is an abbreviation for Modulator/ Demodulator • Modems can be internal or external. Basic Knowledge

  3. Modem Signals • Modems take analog signals and convert them into digital signals and vice versa. • The data that goes into the modem is called serial communication and is a series of 0’s and 1’s. This data is converted into bytes via the UART(Universal Asynchronous Receiver/Transmitter) so CPU’s can understand information • There are 2 ways of “chopping up” the incoming signals • Asynchronous • Synchronous

  4. Asynchronous Organization • The main way to serial ports communicate • The data is “chopped up” into 7 or 8 bit packets. 8-bit is most common • Each Packet starts with a start bit that tells the receiving modem that it is the beginning of a piece of information and it always is zero and ends with a stop bit that tells the receiver the packet is over. • Asynchronous communication packets have an optional parity bit used for error detection. Parity bits are rare • Asynchronous packet settings are described in a particular order: data bits, parity type, then stop bits. • Example: If a system uses 8 data bits, no parity, and 1 stop bit, you’d say 8-N-1.

  5. Synchronous Organization • Mainly for uploading and downloading programs to and from your computer. • Protocols are sets of definitions used by communication programs so that both computers are speaking the same language. There are many protocols that basically work the same way. • When a modem is going to send data with synchronous communication it sends a series of standardized bytes called sync bytes, which tell the receiving port that it is about to get information. • After sync bytes the sending modem adds a start-of-text(STX) marker then sends the data. • After data transmission the packet ends with an end-of-text(ETX) marker and error checking characters(ECC) • The receiver responds with an acknowledge if data is good or a no acknowledge if there is an error.

  6. FTP’s and Baud Rate • File Transfer Protocol • FTP is used to enable you to exchange files with mainframes, mini’s, or other PC’s. It should be included in the software package that comes with your modem • Refer to pages 1046-1047 for variations of FTP. • Baud Rate • Baud rate is the time that a modem uses as its carrier frequency • Baud rate speed is measured in bits per second • Example: If baud rate was 2400 and modulated at 2 bits per cycle the bps would be 4800

  7. Flow control • Flow Control (Handshaking) • Process by which 2 serial devices verify a conversation. • During data transfer there are 2 conversations when flow control is needed, Local(between modem and com port) and end-to-end(between modems). • Flow control can come in hardware and software. Look at pg. 1049 to learn about each.

  8. Interface Signals • CD – Carrier signal detected • RD or RX – Receive Data • TD or TDX – Transmit Data • DTR – Data Terminal Ready • DSR – Data Set Ready • RTS – Request To Send • CTS – Clear To Send

  9. Modem Commands • Commands of modems are known as the command set. • There is no standard for modem commands, but there is a main set that most companies follow. It is the famous AT command set. • AT commands are entered through the keyboard. • A list of AT commands is on pg. 1052-1053

  10. Modem Commands • AT – checks to see that modem is plugged in • ATH – Hangs up • ATM1 – turns the speaker on • ATM0 – turns the speaker off • ATD – dials a number • ATZ – resets the modem

  11. Talking to serial ports and telephone lines • Telephone Lines • A phone line is guaranteed to handle speeds only up to 2400 baud • To verify you are getting the best quality is to call the phone line. • If the company thinks the voltage drop is too much, they will condition the line. Conditioning is adding a little voltage to the line to compensate for the voltage drop. • Talking to serial ports • Data communication equipment is the device that sends data. Data Terminal Equipment is the device that receives data. The connection between the 2 is called the handshake. • Chart on page 1054

  12. UART’s • Heart of many serial ports. • It takes parallel information from data buses and makes it serial information to be sent out to a modem. • It’s important to know what type of UART is in your COM ports. You can find out the type by checking the diagnostics tab/ More Info button under the Modems applet in the control panel under windows 9x. In Windows 2000 use the Phone and Modem Options applet. • For UART’s check pg. 1056

  13. Fax Modems • Fax technology was invented in 1842 by Alexander Bain • Modems send data in single dots which are converted to text. • 4 different classes or groups of fax standards • Groups 1 and 2 were analog standards for fax modems operating at 300 baud. • Group 3 was standardized for digital facsimile devices to communicate over phone lines. Fax transmission had a max speed of 14400 bps. • Within group 3, there are several different classes that explain devices using different speeds and methods of communication. • Any good fax modem software can run G3 • Chart of Fax standards on 1058

  14. Modem Negotiations • Standardized series of responses between two modems so they can determine optimal speed, data compression, error detection, etc. • Chart pg. 1059-1060

  15. TAPI • TAPI is a set of dynamic link libraries (DLL) that enables Windows 9x to perform telephone functions. • A good TAPI installation will configure the modem type, I/O address and IRQ, local phone number, long distance dialing codes, and etc. to enable it to use the modem. • TAPI is also used for answering machines, handle faxing, call forwarding, caller ID, and paging

  16. Installation and Troubleshooting • Modems rarely fail, but problems usually are COM port problems • Set up and verify the com ports • Make sure you install nonconflicting I/O addresses and interrupts. • Check modems in device manager to verify the modem is working properly. • Windows 9x and 2000 PnP technology makes installation very easy. To do it manually use the add new hardware wizard. • Verify the Modem’s BIOS • Modern modems all have on board BIOS • A better term for BIOS would be command set • The BIOS is stored on the flash ROM of a modem. • BIOS can be corrupted easy by simply removing and reinserting the modem

  17. Set Up the Correct Command Set • All that Windows communication programs need to handle a modem are the latest IFN files for your modem and version of Windows. • If Windows doesn’t verify the modem try a different brand. • Windows 2000 • For dial configuration use the phone and modem option and the control panel • Windows 2000 will not detect some internal modems so you must do manual installation.

  18. When Modems Break • Check COM port and IRQ port • Program called modem doctor is very good for this • Modem doctor verifies COM ports and tests your modem and tells what kind of shape its in. • If your software says there is no modem • Make sure modem is looking at correct port • Check that there is no conflict with other devices • Reinstall all software and reconfigure your modem. • Modem works sporadically • Make sure you have the right modem installed. • Try different type. • Check phone lines in house.

More Related