1 / 20

LED ROADWAY LIGHTING

LED ROADWAY LIGHTING. Presented by Amin Salman/t.d.o.t. Lighting the roads. Roadway lighting is a proven safety countermeasure. The positive safety effects of lighting have been documented in various reports and publications. Source: FHWA Lighting Handbook August 2012.

burnsm
Download Presentation

LED ROADWAY LIGHTING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. LED ROADWAY LIGHTING Presented by Amin Salman/t.d.o.t

  2. Lighting the roads • Roadway lighting is a proven safety countermeasure. The positive safety effects of lighting have been documented in various reports and publications. Source: FHWA Lighting Handbook August 2012. • HID is the technology of the 60s and LED is the future.

  3. Us Department of energy • Of the numerous illumination platforms currently available, only Solid State • Lighting-in the form of Light Emitting Diodes (LED)-offers our nation the • potential to save energy and enhance the quality of our environment.

  4. LED benefits LED Benefits: - Decreased energy consumption & costs - Reduced maintenance costs; due to longer life - Visible commitments to efficiency - Improved safety through enhanced visibility - Decreased light trespassing and pollution - No mercury, lead, or other known hazards -Programmable controls/Dimming

  5. Disadvantages of led • Expensive initial cost …(but better life-cycle cost) • Performance largely depends on ambient temperature & heat-sinking (you can’t just stick an LED in a regular fixture housing) • Light loss factors (LLFs) are not easily determined • Must be supplied with the correct current (needs a power supply/driver to convert AC to DC) • Because of their long life, they may not undergo the routine cleaning every 3-5 years typically corresponding with re-lamping.

  6. Luminaire efficiency

  7. Luminaire efficiency TYPICAL 150 WATT HIGH PRESSURE SODIUM STREET LIGHT MEASUREMENT OF LUMENS REACHING THE GROUND • TOTAL LUMEN OUTPUT OF HPS LAMP 22000lm 100% • DOWNWARD STREET SIDE 6656lm 30.3% • DOWNWARD HOUSE SIDE 6057lm 27.5% • DOWNWARD TOTAL LUMENS 12712lm 57.8% • REFLECTOR INEFFICIENCY -9278lm 42.2%

  8. Luminaire efficiency

  9. Luminaire efficiency

  10. Pedestrians • 5,376 were killed and approximately 70,000 injured in motor vehicle crashes on public roadways in the U.S in 2015. Pedestrians comprised about 15% of crash deaths. 12% of pedestrians were injured in a non-roadway location such as parking lot and therefore wouldn’t be counted in police-reported crash statistics (meaning it’s more than 70,000). Source: Insurance Institute for Highway Safety and Highway Loss Data Institute.

  11. Locations of Pedestrians crashes • 54% of pedestrian deaths occurred in major roads and specifically at intersections (26%). Among pedestrian crashes of all severities, the most common scenario involves pedestrians crossing in front of a passenger vehicle that is traveling straight. These crashes typically occur on roads with speed limits below 40 mph, and about half occur at intersections.

  12. How to improve pedestrian safety? • Three main approaches: • Separating pedestrians from vehicles by time or space; • Making pedestrians easier to spot; • And reducing vehicle speeds.

  13. Using Led for Intersection Lighting • Contrast, is strongly correlated with quick identification of pedestrians and night-time crash reduction. • Higher vertical illumination results in better visibility in the cross walk.

  14. Using led for area parking

  15. LED street light fixtures

  16. LED post light fixtures

  17. LED high Mast

  18. LED in Tennessee -The City of Knoxville: Largest LED Street Light Project in the State. Replacing: 29000 HPS/MV to LED. Final Cost: $13 million. Annual Energy Saving: $1,054,364. -AUB (Athens Utility Board): Complete conversion to LED by January 2017.(E-mail dated 4-10-17 from Alexa Voytek-Program Manager at TDEC) -Jim Kerr-Murfreesboro City-sent an e-mail to use LED lights for SR-268 (Thompson Lane): From Broad St. to Memorial Blvd -TDOT First Project: Interchange I-40 & SR-171 Mt. Juliet, Wilson Co.

  19. Led standards and specifications • Will be included in the updated version of TDOT Standard Specifications for Road and Bridge Construction (hopefully the 2018 Edition) & Traffic Operations Manual.

  20. Questions / comments?!

More Related