SiD and the Next Steps for ILC Detectors

1. SiD and the Next Steps for ILC Detectors SLAC DOE Program Review June 12, 2007 John Jaros

2. A Lot is Happening in the ILC Detector World • Real Progress on the Machine: Reference Design Report (RDR) and Cost were unveiled in February. • Pressure on the detectors: International Linear Collider Steering Committee charged the Detector Community to Propose a Detector Roadmap, to put ILC Detectors on the same timeline as the Machine. • Preparing the ILC Case: A draft Detector Concept Report (DCR), the companion document to the RDR which makes the case for ILC physics and detectors, was released in May. The RDR and DCR justify moving to the next step, engineering designs for machine and detector. • Next Steps: Plans for the Machine Engineering Design Report and first steps for the Detector Roadmap were announced at the LCWS last week.

3. DCR: The Case for ILC Physics and Detectors http://www.linearcollider.org/wiki/doku.php?id=dcrdet:dcrdet_home

4. 2005 2006 2007 2008 2009 2010 Global Design Effort Project LHC Physics Baseline configuration Reference Design GDE Machine Roadmap Engineering Design ILC R&D Program Expression of Interest to Host International Mgmt Global Design Effort

5. Shin-ichi Kurokawa, ILCSC Chair Albrecht Wagner, ICFA ChairSubject: Letter to WWS Co-Chairs • 26 February 2007 • To: Co-Chairs of the WWS International Organizing Committee • From: ILCSC • The realization of the International Linear Collider has taken major steps forward in recent years. This could not have happened without the leadership taken coherently by the particle physics community, within the framework of ICFA. Unprecedented collaborative steps have been necessary, and the community has adapted successfully to what, in some regions, required major redirections of traditional accelerator R&D effort. • Two major milestones, the selection of the main-linac RF technology and the GDE’s announcement of the RDR budget and associated design choices, keep the GDE on pace to complete a construction-ready engineering design for the ILC accelerator-complex by 2010. • Maintaining this momentum requires also that the equivalent strategic decisions and the level of technical maturity for the two ILC detector proposals keep pace with the accelerator schedule. Major progress in this regard is ongoing under the auspices of WWS. In addition, a definite plan together with milestones is needed to have detector designs of a maturity similar to that of the accelerator by 2010. This needs an enhanced effort by the community. ILCSC will support the formation of an International Detector Advisory Group to assist this effort. ICFA looks forward to receiving such a plan from WWS at the June 1, 2007 ILCSC meeting at DESY.

6. The Roadmap, as proposed by WWS The key elements of the roadmap proposal are: • A call for LOIs by ILCSC this summer, due summer 2008 • These LOIs will provide a description of the proposed detector and its performance, and will note the intent of those planning to collaborate on developing the EDR. • LOIs will be reviewed by the IDAG, an International Detector Advisory Group of experts chosen by ILCSC. • IDAG will facilitate the definition of two, complementary and contrasting detector designs, and report the result to ILCSC. • The result of this process should be two proto-collaborations operating by the beginning of 2009 to produce EDR documents by end 2010.…and begun by the ILCSC • Issue Call for Detector LOIs summer 2007. • Search for, and appoint a Research Director, to oversee the experimental program for the ILC, coordinate reviews of the LOIs, facilitate the selection of two, complementary detector designs, help generate support for the two detector EDRs, and monitor EDR development. …

7. Roadmap Implications Calling for LOIs signals a Phase Change for the Detector Concepts. Detector “Design Studies” are becoming “Detector Collaborations.” Calling for LOIs also sends signals to the ILC Detector R&D Community. Now’s the time to align with a detector concept, participate in the optimization process, and contribute to the LOIs. Four goes to Two.The four ILC detector concepts, plus any that emerge within the next year, must eventually contract to two, suitable for full engineering design. Spontaneous Coalescence (e.g., LDC and GLD) Induced Coalescence? Shotgun Marriage?

8. ILC Detector Concepts SiD LDC GLD 4th • Dual Solenoid • Compensating Cal • TPC Tracking • Solenoid Designs B=5,4,3 Tesla • Si vs TPC Tracking • “Particle Flow” Calorimeters

9. SLAC’s Role in ILC Detector Development • Co-Leads the SiD Design Study • Provides Computing-Simulation- Analysis infrastructurefor the US ILC Detector Effort • Optimizes SiD Design and Benchmarks SiD performance • Pursues detector R&D, especially Si/W Calorimetry, Readout electronics, and Si Tracking • Designs and studies the Machine- Detector interfaceand IP Instrumentation .

10. Silicon Detector Design Study Goals: Design an ILC detector, aggressive in performance, constrained in cost, identify and develop needed detector R&D, and engage an international community of physicists interested in the ILC .

11. SiD Collaborators • Design Study Leadership is InternationalFermilab, Argonne, Brookhaven, SLAC, Annecy, U Tokyo,U Oregon, U T Arlington, NIU, Brown, U Wisconsin, Oxford, KEK • Design Study Participants from many InstitutionsU Washington, RAL, LLNL, IHEP Beijing, Kyungpook U, Princeton, MIT, UCSC, UC Davis, U Iowa, U Colorado,Kansas State, U Chicago, U Michigan, Notre Dame, Yale,U New Mexico, Purdue • Close R&D Collaborations with several InstitutionsFermilab, U Oregon, UC Davis, Brown, Oxford, UCSC,NIU, Argonne,… 130 Authors for SiD DOD

12. SiD Activities • Collaboration Workshops SiD Workshop at SLAC October 26-28, 2006http://www-sid.slac.stanford.edu/SLAC-06-workshop/Workshop06.asp SiD Workshop at Fermilab April 9-11, 2007http://ilc.fnal.gov/detector/rd/sid/sid07.htm • R&D Reviews Microstrip Sensor Design Review (SLAC) Dec 14, 2006 WWS Tracking Review (Beijing) Feb 5-8, 2007 WWS Calorimeter Review (DESY) May 31-Jun 4, 2007 • Weekly Meetings Benchmarking, Reconstruction, Calorimetry, Tracking/Vertexingsee SiD Webpage: http://www-sid.slac.stanford.edu/default.asp • SiD Documents Detector Outline Document http://hep.uchicago.edu/~oreglia/siddod.pdf SiD Tracking R&D Report http://www-sid.slac.stanford.edu/Documents/Tracking_review.pdfSiD Calorimetry R&D Report http://www-hep.uta.edu/~white/SiD_Cal_Review07/SiD_Calorimeter_RD_Review_Report_Final.doc

13. SiD Design Rationale • Jet energy resolution goal is E/E=3-4% to distinguish hadronic decays of W’s and Z’s. Particle Flow Calorimetry requires a dense, highly segmented, SiW Ecal and Hcal. • Constrain the cost of calorimeters and solenoid by limiting the radius; boost B to maintain BR2. B = 5 Tesla • Si strip tracker exploits high B and gives excellent momentum resolution and robust performance.pt/pt2≤5 x 10-5 GeV-1 • VX Tracker exploits high B to sit at minimum possible radius with max Ω = 5  10/psin3/2 m

14. SiD Starting Point Flux return/muon Rin= 333 cm Rout= 645 cm Solenoid: 5 T; Rin= 250 cm HCAL Fe: 34 layers; Rin= 138 cm EMCAL Si/W: 30 layers Rin= 125 cm Si tracking: 5 layers; Rin= 20 cm Vertex detector: 5 barrels, 4 disks; Rin= 1.4 cm

15. SiD @ SLAC: Simulation/Reconstruction SLAC Sim/Recon Group Ron Cassel Norman Graf* Tony Johnson Jeremy McCormick See Norman’s Talkin Breakout Sessions • Provides full detector simulation in Geant4. Runtime detector description in XML, making it easy to study design variations. • Provides Java-based reconstruction & analysis framework • Developing Tracking and Calorimeter reconstruction code • Supports SiD, ALCPG, and international simulation effort with Tutorials, Workshops, WWS Working Groups • Provides physics simulation and data samples for physics analysis e.g. 1 ab-1 sample of all SM Processes at 500 GeVhttp://www.lcsim.org/datasets/ftp.html

16. Optimization and Benchmarking SLAC GroupTim BarklowRon CassellNorman GrafJohn Jaros • Understanding Physics Requirements on CalorimetryNeed clean identification of W’s, Z’s, H’s, tops, so dijet mass resolution  few GeV. • How Important is Jet Energy Resolution? e.g. Triple Higgs Coupling Requiring dM/M  Z/MZ = 2.5/92 = 2.7 %, sets dEjet/Ejet ~ 3-4% Tim Barklow E/E

17. Particle Flow CalorimetryPromises Improved Dijet Mass Resolution 1 Measure the energy of every particle, not the energy deposited in calorimeter modules. Tracker measures charged particles, ECal measures photons, Hcal measures neutral hadrons.High transverse and longitudinal segmentation is needed to distinguish individual particles and avoidconfusion.

18. Silicon Tungsten Ecal 13 mm2 pixels Readout 1k pixelsper si sensor (KPiX) Low Power Passive Cooling SLAC Effort BreidenbachFreytagGrafHerbstHallerNelson + BNL, U Oregon, UC Davis

19. Pixel Sensor with KPiX (U Oregon) Integrated Electronics Preserves RMoliere Kapton Cables (UC Davis) Mechanical Design (SLAC/Oregon/Annecy) 1 mm readout gap  13 mm effective Moliere radius. Very compact showers.

20. KPiX Readout Chip One cell. Dual range, time measuring, 13 bit, quad buffered 2 x 32 Prototype #4 now being tested at SLAC. #5 is on the way. Full chip in the fall.Use for ecal and µstrips; adapt for hcal. Noise in KPiX-4 • Demonstrated Performance • Single MIP tagging (S/N = 8) • Dynamic range 0.1 –2500 MIPs • Low power <20 mW per wafer with power pulsing • 4 deep buffer for bunch train

21. SiD Integrated Tracking • Silicon Tracker is fast (1 BX only) • Silicon is robust(No HV trips) • Tracking System VXD Si Main Tracker Ecal

22. FNAL Mech Design Pixel Vertex Tracker VXT Challenges: Readout Speed, Current Supply, Material Budget, Backgrounds SLAC GroupMarty BreidenbachSu Dong Nick Sinev (Oregon) Yale/Oregon Marty’s Idea: Short Column CCD

23. Si Tracking See Tim Nelson’s Talk in the Breakout Sessions • Physics Premium on Superb Momentum Resolution • ChallengesLow Material BudgetRobust Pattern Recognition p/p2 ~ 2 x 10-5 0.5% SLAC GroupN. GrafJ. JarosT. NelsonR. Partridge

24. Si Microstrip Development KPiX Compatible Sensor Designed 92 x 92 mm21840 sense lines < 5 m resolution Submitting to HPK Double Metal TracesConnect Strips to KPiX Kapton Cable Design (UNM/SLAC)

25. Si Sensor Module/Mechanics • Sensor Module Tiles TrackerCylinders, Endcaps • Kapton cables route signalsand power to endcap modules • Next steps: FEA and Prototyping Tracker Design FNAL/SLAC

26. Machine-Detector Interface • Machine-Detector Interface at the ILC • (L,E,P) measurements: Luminosity, Energy, Polarization • Forward RegionDetectors • Collimation and Backgrounds • IR Design and Detector Assembly • EMI (electro-magnetic interference) in IR See Mike Woods’ talkin the Breakout Sessions • MDI-related Experiments at SLAC’s End Station A • Collimator Wakefield Studies (T-480) • Energy spectrometer prototypes (T-474/491 and T-475) • IR background studies for IP BPMs (T-488) • EMI studies • Beam Instrumentation Experiments in ESA • Rf BPM prototypes for ILC Linac (part of T-474) • Bunch length diagnostics for ILC and LCLS (includes T-487)

27. ILC Test Beams in ESA 50 Participants at SLAC in 2006 for this program 18 from SLAC + 32 users 18 Institutions participated in 2006 beam tests and measurements Birmingham U., Cambridge U., Daresbury, DESY, Dubna, Fermilab, KEK, Lancaster U., Leland H.S., LLNL, Manchester U., Notre Dame U., Oxford U., Royal Holloway U., SLAC, UC Berkeley, UC London, U. Oregon Runs in 2006, 2007, and 2008 (planned) Precision Energy Spectrometers Needed to Measure Energy to 200ppm

28. MDI Activities IR Design Pair Backgrounds Surface Assembly SLAC MDI Group Tom Markiewicz (ILC)Takashi MaruyamaKen MoffeitMike Woods

29. SiD’s Next Steps Optimize SiD Design, Grow the Collaboration, Write an LOI • Simulation/Reconstruction Code Make PFA into a design tool, Complete detailed tracker simulation, Perfect Forward Pattern Recognition • Benchmarking/Analysis/Design Optimization Optimize Global Parameter, Optimize Subsystem Parameteres, Develop Full MC Benchmark Analyses. • Ecal Fab and Test full KPiX Prototype, Evaluate new Si Sensors, Begin Mechanical Design ,Build Ecal Prototype Tower, Beam Test • Main Tracker Fab and Test Tracker Si Sensor, Prototype Sensor Modules, Establish Si Lab, Beam test • Vertex Tracker Evaluate Performance, Continue with Mechanical Design (with FNAL), Study Power Distribution

30. Expanding Effort on SiD We have a good start on optimizing the SiD design. There’s progress with the addition of a new SiD Mechanical Engineer (due~Oct. 1), plans underway for a Si Lab for sensor testing and development, growing involvement from SLAC Users and the International Community, and progress on detector R&D. But the present program must grow if we and our International colleagues are to prepare the SiD LOI, and the Engineering Design which follows, on the WWS timetable. SLAC is a natural site to lead ILC detector development with our user community, sister laboratories, and international partners. We have much of the needed engineering, construction facilities, large detector experience, computing and simulation infrastructure, and test beams, and can serve as a center for design and analysis activity.

31. Backup Slides

32. SiD @ SLAC: Physics Benchmarking • Evaluating Detector Performance Requirements • Full MC Physics Analyses ZHX ZHqqbb

33. SiD@SLAC: People SiD Department Marty Breidenbach John Jaros SiD Sim/Recon Norman Graf Ron Cassell Tony Johnson Jeremy McCormick SiD Ecal Electronics Gunther Haller Dieter Freytag Ryan Herbst SiD Tracking Tim Nelson Rich Partridge SiD MDI/Polarization Tom Markiewicz Mike Woods Ken Moffeit Takashi Maruyama SiD Benchmarking Tim Barklow SiD Vertex Detector Su Dong

34. More Information and MeetingSchedules are on SiD Webpage:http://www-sid.slac.stanford.edu/

35. Guide to ILC Speak ILCSC International Linear Collider Steering Committee, chartered by ICFA to realize the ILC. ILCSC chose the technology, established the GDE, hired the Director, facilitates getting support, and provides oversight. GDE Global Design Effort. Under Barry Barish’s direction, the GDE is the international team designing, developing, and now engineering the ILC. Next step, Machine EDR. WWSWorld Wide Study (of Physics and Detectors for the Linear Collider). Grass Roots organization of the detector and physics communities, led by Brau, Richard, and Yamamoto. WWS organizes detector R&D and detector concept studies, and has developed a detector roadmap. RDR/DCRThe Reference Design Report, outlining the machine baseline design and costs and the Detector Concept Report, making the case for ILC physics and detectors. EDRsEngineering Design Reports for the machine and detector, due 2010, which will serve as the proposal to World Governments to construct the ILC and its Detectors.