Bernina Activa 125. Sewing Machine. Bobbin. Round metal spool which holds the bottom thread. Bobbin Case. Holds the bobbin and regulates bottom tension. Needle Stitch Plate. The place where seam allowance guides are located. Feed Dogs. Teeth that move the fabric through the machine.
Round metal spool which holds the bottom thread.
Holds the bobbin and
regulates bottom tension
The place where seam allowance guides are located.
Teeth that move the fabric through the machine.
Holds the fabric in place while you sew.
Raises and lowers the presser foot.
Carries the thread and pierces the fabric.
Holds the needle in place.
Creates backstitching to keep seams from coming apart.
Makes it so that the needle stops in the desired position.
Allows the machine to sew at half of the normal speed
Pulls thread from the spool.
Provides tension on the thread while winding a bobbin.
Controls the tightness on the thread.
Displays information about sewing machine settings
Sets the length of stitches.
Needle Position Buttons
Changes needle position from left to center to right.
Sets the width of zigzag and pattern stitches.
Holds the top spool of thread.
Holds the bobbin while winding.
Can be turned TOWARD YOU to raise and lower the needle.
Stitch Selection Buttons
Changes the pattern of the stitch
Turns the sewing machine on or off.
Controls the speed at which the fabric moves through the machine
15. Needle Clamp
16. Seam Allowance guides
A. 5/8” Marked on the back of the stitch plate
B. ¼” Edge of Presser Foot
C. 1/8” Inside corner on Presser foot
End of Stitch plate
**You will need to individually show me where the bobbin case is and where the foot pedal is.
Hint: Each line on the seam allowance guide is 1/8”
Press the Reverse button at the beginning and end of each seam