1 / 87

Pasture / Hay Irrigation options and Management

Micro-Irrigation for High Tunnels. Pasture / Hay Irrigation options and Management. Chris Henry, Ph.D., P.E. Assistant Professor and Water Management Engineer. Contact Information: E-mail: cghenry@uark.edu Office: 870-673-2661.

Download Presentation

Pasture / Hay Irrigation options and Management

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Micro-Irrigation for High Tunnels Pasture / Hay Irrigation options and Management Chris Henry, Ph.D., P.E. Assistant Professor and Water Management Engineer Contact Information: E-mail: cghenry@uark.edu Office: 870-673-2661 Special thanks to Phil Tackerand KSU Extension for inspiration and assistance with this presentation Special thanks to Phil Tacker for inspiration and assistance with this presentation

  2. Micro-Irrigation (drip/trickle) The slow, low pressure, precise, application of water and nutrients directly to plants’ roots in a predetermined pattern.

  3. What is irrigation and why do we irrigate? • The watering of land by artificial means to foster plant growth (Merriam Webster Dictionary). • Food security

  4. Drip Irrigation • Efficiency 95 – 100% • Less disease problems • Reduced weed growth • Fertilizer injection is possible

  5. Types of Micro Irrigation • Point Source (includes bubblers) • Line Source • Micro Spray

  6. Point Source Application: Individual plantings like orchard trees, grapes etc.

  7. Point source emitters ‘Drippers’ Mini sprinklers Spaghetti tubes and drippers 2 GPH emitter Each is rated for dripping at a pre-determined rate usually expressed in Gallons Per Hour (GPH) 1-3 GPH are common sizes

  8. Emitters • Pressure: 1 psi minimum (2.3 ft, 0.7 meter elevation) • Typical output: ½, 1, 2 gallons per hour • (2, 4, 8 liters per hour) • Outlet spacing is almost unlimited 2 – 12 feet is most common (0.6 – 3.6 meters) • Run length will be limited at low pressure (1 psi) approx. 15 feet (5 meters) • 5-15 psi on larger systems (> 15 ft)

  9. ½” Polyethylene Tubing Emitter Punch Hole Insert Emitter Emitter Installed

  10. Slow application Covers 12 – 16 inch diameter circle

  11. Can be hidden under mulch – don’t bury emitter in the ground!!!

  12. Wire Staple hold in place End Closure

  13. Line Source Application: Irrigation in vegetable garden and/or rowed plants

  14. Drip Tape • Pressure 1psi minimum (2.3 ft, 0.7 meter elevation) • Flow: approx. 0.5 gpm/100 ft (2 lph/42 meter) • Hole spacing: usually 12 inches (30 cm) • Covers about 12 inch (30 cm) wide strip

  15. Concept introduced in England after WWII Adopted in Israel for irrigating crops in the desert American ‘invented’ the modern drip-tape concept Tube in a tube… Built in ‘pressure compensation’ over 5-15 PSI. Allows long runs with uniform water distribution

  16. Line source emitters Drip tape or drip tube ‘Leaky’ pipe Weep hose Line can be for dripping at a pre-determined rate usually expressed in Gallons Per Length Hour (GPH) - 25 G/100’/Hr is the most common drip capacity.

  17. Drip Tape Wall Thickness 10 to 12 mil Probably best for cost and durability

  18. Header line with drip tape connected at each row

  19. Fittings connect to header line and to drip tape End of tape is easily sealed

  20. Surface water supplies and well water supplies will probably require filtration for micro-irrigation.

  21. Micro Spray Application: Solid or close plant spacing

  22. Micro Sprays • Pressure: 5 psi minimum (12 feet, 3.6 meters elevation) probably require pump • Flow: 1.5 – 65 gallons per hour (6 – 250 liters per hour) 10 to 15 gph (38 to 57 lph) common • Coverage distance: 2 – 25 feet (0.6 – 7.6 meter) • Various wetting coverage patterns

  23. Drip Irrigation • Irrigations are usually frequent since applying low amounts of water • Every 1 to 2 days is common

  24. 1 meter minimum

  25. Homemade Drip LineOrifice Discharge (gph)

  26. http://sowingshalom.blogspot.com/2009/11/simple-bucket-drip-irrigation-system.htmlhttp://sowingshalom.blogspot.com/2009/11/simple-bucket-drip-irrigation-system.html

  27. Mulching Combined With Irrigation

  28. Large Scale Micro-irrigation

  29. 30 “ wide 1 ½” rise Plastic mulch= 48” wide Rolls are 2,000 to 4,000 ft long Cost $110-130/acre

  30. Drip Tape or Tube 8 mil (annual) 15 mil (several years) $130-140/roll 1.6c/ft. Rolls or spools 8 mil- 7,500 ft (acre spool) 15 mil- 4,000 ft

  31. Single rows or double rows planted on beds Offset Tomatoes Melons Large flowers Nursery stock Centered Peppers Cole crops Strawberries Small Flowers

  32. Hand planting Mechanical or ‘punch’ planter

  33. Remove a crop and plant another so that the beds are used 2-3 times per season.

  34. Components of a drip system • ( backflow preventer) • Filter • 150 mesh screen • Pressure regulator • 5 to 15 PSI • Manifolds • Drip tubing or drip line Optional Pressure gauges Injectors Controllers

  35. Screen or mesh filters for well or municipal systems (closed water source) 150 or greater mesh flush valve to clean (pressure gauge to indicate filter clogging)

More Related