1 / 24

Portable HF Operating

Portable HF Operating. Why operate a portable HF station ?. Physical space restrictions or restrictive covenants (condo) may make it difficult or impossible to erect HF antennas at home.

brock
Download Presentation

Portable HF Operating

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Michael Babineau VE3WMB Portable HF Operating

  2. Michael Babineau VE3WMB Why operate a portable HF station ? • Physical space restrictions or restrictive covenants (condo) may make it difficult or impossible to erect HF antennas at home. • High RF noise levels in residential neighbourhoods resulting from power-lines and/or consumer electronics makes operation from home difficult. • Vacation or work travel (mini DX-pedition) • For fun ( 1 QSO in the field is worth 10 in the shack !)

  3. Michael Babineau VE3WMB VA3SIE operating FYBO QRP contest

  4. Michael Babineau VE3WMB My Criteria for operating HF Portable • Short set-up time - on the air in less than 20 min. • Operate for 2 to 3 hours maximum during daytime. • Usually I provide my own antenna supports – I don't want to rely on Mother Nature. • No more than two trips to the car for gear. • Multi-band operation on 40m / 30m / 20m. • Your criteria may be different, it is up to you to decide what is important to you.

  5. Michael Babineau VE3WMB Expectations – What can you hope to achieve ? • Easy • Ragchew QSOs within North America • Some DX Contacts (at the mercy of propagation) • Casual Contesting • Hard • Competing with the “Big Guns” in contests • Serious DXing (i.e. busting pileups) • Accept the fact that you won't be the loudest signal on the bands.

  6. Michael Babineau VE3WMB Power out & in ... the implications

  7. Michael Babineau VE3WMB Battery Weight vs Capacity • 32 lbs - 32 Ah sealed lead acid 'wheelchair battery' • 14.5 lbs - 18 Ah sealed lead acid Booster pack • 4.5 lbs - 5 Ah sealed lead acid battery • 2.0 lbs – 2 Ah sealed lead acid battery • 0.5 lbs – 2.7 Ah (10 X 1.25v NiMH AA cells) • 1.3 oz – 0.4 Ah 9V Alkaline 'Transistor battery'.

  8. Michael Babineau VE3WMB 100 watts vs 25 watts vs 5 watts • Assume that while running 100 watts into a Hamstick you receive a 599 signal report ... all other factors being equal : • At 25 watts out your signal report would be 589 • At 5 watts out your signal report would be 579 • With a better antenna and reduced power output you can reduce your battery weight, achieve similar results and make your station more portable.

  9. Michael Babineau VE3WMB Some Practical HF Portable Antenna Ideas

  10. Michael Babineau VE3WMB EDZ – Extended Double Zepp • 44 or 88 foot doublet - fed with twin-lead or ladder-line (Google 'Norcal Doublet') • 44 ft version will operate on 40m through 10m • 88 ft version adds 80m operation • Advantage over a 40m dipole is that major antenna lobes are broadside to antenna on all bands. • Can easily be matched by a tuner and installed as inverted-vee with a single antenna support.

  11. Michael Babineau VE3WMB Clip-Lead Multi-Band Dipole • Inner dipole is resonant on highest frequency of interest (i.e. 20m). • By jumpering the dipole end insulators with clip-leads, additional wire lengths are successively added on to make the antenna resonate on the next lowest band (i.e. 30m & 40m). • This antenna is a resonant dipole on each of the bands of interest. • May be fed with coax. No tuner needed.

  12. Michael Babineau VE3WMB Clip lead Dipole

  13. Michael Babineau VE3WMB Clip Lead details

  14. Michael Babineau VE3WMB Short Vertical non-resonant Wire • Vertical 24 foot to 28 foot long wire • Use 4 to 20 ground radials each 16 feet long (1/8 wavelength at lowest operating frequency). • With a tuner, it will load on 40 m through 10m with ease • No feedline losses incurred as no feedline is needed.

  15. Michael Babineau VE3WMB Long vertical non-resonant wire • End-Fed 84 to 87 foot long wire • Use 4 to 20 ground radials at least 1/8 wave on lowest operating frequency • Will easily match on 80m through 10m with a tuner. (May even be used on 160 m). • Can be erected as an inverted-L (the taller the vertical section the better, with the leftover bit running horizontal to a tree etc.) • No feedline losses because there is no feedline

  16. Michael Babineau VE3WMB The 'WYE' a three wire Groundplane • Mono-band, upside-down Y shaped GP vertical • Vertical Radiator (234 /F Mhz = length in feet) • Two sloping elevated radials (246/F Mhz) • Good match to 50 ohm coax. • Attach coax centre conductor to vertical wire, braid to Ground plane. Hang from a tree / fiberglass pole etc. • (Hint for VHF use can be made out of stiff wire with an SO-239 as the center insulator. )

  17. Michael Babineau VE3WMB Portable Antenna Mast ideas • Shakespeare Wonderpole “Crappie” fishing pole – available in 10' , 13' and 20 foot lengths at about $1 per foot at Le Baron's. • DK9SQ and MFJ 10 meter long fiberglass masts are heavier duty than fishing poles and can also be used to support small VHF / UHF beam antennas -www.kangausa.com & www.mfj.com • Other fiberglass masts such as Jackite -www.jackite.com

  18. Michael Babineau VE3WMB Fiberglass Mast Support Ideas • Lee Valley Multi-Purpose Anchor Stake – item # ST110 – cost ~ $13 • Homebrew bases – roll your own with ABS / PVC Pipe, aluminum or steel angle stock, spikes, SS hose clamps etc. • Other patio umbrella supports

  19. Michael Babineau VE3WMB Antenna construction ideas • PVC Tees can be used as center insulators; PVC joiners or synthetic wine corks can be used as end-insulators. • Fishing snap-swivels and crimp ring terminals can be utilized create a center support for a lightweight doublet or vertical wires attached to a fiberglass pole. • Wire - #22 to #24 AWG Teflon coated Silver plated from N2GO or #531- 'Invisible Toughcoat Silky' from the Wireman at www.thewireman.com

  20. Michael Babineau VE3WMB Antenna Insulators

  21. Michael Babineau VE3WMB Ring Terminal doublet support

  22. Michael Babineau VE3WMB Safety • Consider RF exposure guidelines & implications of low antennas • 5W of RF has a bite, higher power can cause RF burns. Ends of wire antennas are at high potential • Ensure that your antennas do not pose a risk to pedestrians, pets & children when operating from a public place. • RAC members have $1M in liability insurance

  23. Michael Babineau VE3WMB Observations • 5W CW and 25W SSB are generally the lower limits for consistent reliable communications • When in doubt go with a horizontal antenna. Even a low doublet or dipole will generally outperform a vertical over average ground. • Verticals work well near salt water or areas with good soil conductivity (i.e. Farmland). • Automatic antenna tuners do work well and are extremely useful for matching multi-band antennas

  24. Michael Babineau VE3WMB Have fun !

More Related