1 / 33

Introduction to CMOS VLSI Design Circuit Characterization and Performance Estimation

Introduction to CMOS VLSI Design Circuit Characterization and Performance Estimation. Outline. Noise Margins Transient Analysis Delay Estimation Logical Effort and Transistor Sizing. Noise Margins. How much noise can a gate input see before it does not recognize the input?. Logic Levels.

Download Presentation

Introduction to CMOS VLSI Design Circuit Characterization and Performance Estimation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction toCMOS VLSIDesignCircuit Characterization and Performance Estimation

  2. Outline • Noise Margins • Transient Analysis • Delay Estimation • Logical Effort and Transistor Sizing

  3. Noise Margins • How much noise can a gate input see before it does not recognize the input?

  4. Logic Levels • To maximize noise margins, select logic levels at

  5. Logic Levels • To maximize noise margins, select logic levels at • unity gain point of DC transfer characteristic

  6. Transient Response • DC analysis tells us Vout if Vin is constant • Transient analysis tells us Vout(t) if Vin(t) changes • Requires solving differential equations • Input is usually considered to be a step or ramp • From 0 to VDD or vice versa

  7. Inverter Step Response • Ex: find step response of inverter driving load cap

  8. Inverter Step Response • Ex: find step response of inverter driving load cap

  9. Delay Definitions • tpd: propagation delay time • maximum time from input crossing 50% to output crossing 50% • tcd: contamination delay time • minimum time from input crossing 50% to output crossing 50% • trf = (tr + tf )/2 • tr: rise time • From output crossing 0.2 VDD to 0.8 VDD • tf: fall time • From output crossing 0.8 VDD to 0.2 VDD

  10. Delay Definitions • tcdr: rising contamination delay • From input crossing VDD/2 to rising output crossing VDD/2 • tcdf: falling contamination delay • From input crossing VDD/2 to falling output crossing VDD/2 • tcd: average contamination delay • tcd = (tcdr + tcdf)/2

  11. Simulated Inverter Delay • Solving differential equations by hand is too hard • SPICE simulator solves the equations numerically • Uses more accurate I-V models too! • But simulations take time to write

  12. Delay Estimation • We would like to be able to easily estimate delay • Not as accurate as simulation • But easier to ask “What if?” • The step response usually looks like a 1st order RC response with a decaying exponential. • Use RC delay models to estimate delay • C = total capacitance on output node • Use effective resistance R • So that tpd = RC • Characterize transistors by finding their effective R • Depends on average current as gate switches

  13. RC Delay Models • Use equivalent circuits for MOS transistors • Ideal switch + capacitance and ON resistance • Unit nMOS has resistance R, capacitance C • Unit pMOS has resistance 2R, capacitance C • Capacitance proportional to width • Resistance inversely proportional to width

  14. Example: 3-input NAND • Sketch a 3-input NAND with transistor widths chosen to achieve effective rise and fall resistances equal to a unit inverter (R).

  15. Example: 3-input NAND • Sketch a 3-input NAND with transistor widths chosen to achieve effective rise and fall resistances equal to a unit inverter (R).

  16. Example: 3-input NAND • Sketch a 3-input NAND with transistor widths chosen to achieve effective rise and fall resistances equal to a unit inverter (R).

  17. 3-input NAND Caps • Annotate the 3-input NAND gate with gate and diffusion capacitance.

  18. 3-input NAND Caps • Annotate the 3-input NAND gate with gate and diffusion capacitance. Cg is approximately equal to Cdiff in many processes.

  19. In a good layout, diffusion nodes are shared wherever possible to reduce the diffusion capacitance The uncontacted diffusion nodes between series transistors are smaller than the contacted diffusion nodes.

  20. 3-input NAND Caps • Annotate the 3-input NAND gate with gate and diffusion capacitance.

  21. Elmore Delay • ON transistors look like resistors • Pullup or pulldown network modeled as RC ladder • Elmore delay of RC ladder

  22. Example: 2-input NAND • Estimate worst-case rising and falling delay of 2-input NAND driving h identical gates.

  23. Example: 2-input NAND • Estimate rising and falling propagation delays of a 2-input NAND driving h identical gates.

  24. Example: 2-input NAND • Estimate rising and falling propagation delays of a 2-input NAND driving h identical gates.

  25. Example: 2-input NAND • Estimate rising and falling propagation delays of a 2-input NAND driving h identical gates.

  26. Example: 2-input NAND • Estimate rising and falling propagation delays of a 2-input NAND driving h identical gates.

  27. Estimate the worst case falling propagation delays of a 2-input NAND driving h identical gates The worst case occurs when the node x is already charged up to nearly Vdd through the top nMOS Suppose A = 1, B = 0, then Y = 1, node X is nearly VDD Now change inputs to A=B=1 both node Y and node X need to discharge

  28. Example: 2-input NAND • Estimate rising and falling propagation delays of a 2-input NAND driving h identical gates.

  29. Example: 2-input NAND • Estimate rising and falling propagation delays of a 2-input NAND driving h identical gates.

  30. Delay Components • Delay has two parts • Parasitic delay, gate driving its own internal diffusion capacitance • 6 or 7 RC • Independent of load • Effort delay, depends on the ration of external load capacitance to input capacitance, • Effort delay changes with transistor width • Proportional to load capacitance • Logical effort and Electrical effort

  31. Contamination Delay • Best-case (contamination) delay can be substantially less than propagation delay. • Ex: If both inputs fall simultaneously, the output should be pulled up in half the time tcdr = (R/2)(6+4h)C

  32. Diffusion Capacitance • we assumed contacted diffusion on every s / d. • Good layout minimizes diffusion area • Ex: NAND3 layout shares one diffusion contact • Reduces output capacitance by 2C • Merged uncontacted diffusion might help too

  33. Layout Comparison • Which layout is better?

More Related