1 / 22

Chapter 14. Wireless LANs

Chapter 14. Wireless LANs. IEEE 802.11 Bluetooth. Basic Service Set (BSS). BSS The building block of a wireless LAN BSS with an AP Access Point (AP): central base station BSS without an AP Stand-alone network Cannot send data to other BSSs Ad hoc architecture BSS with an AP

brett-rose
Download Presentation

Chapter 14. Wireless LANs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 14. Wireless LANs IEEE 802.11 Bluetooth Data Communications, Kwangwoon University

  2. Basic Service Set (BSS) • BSS • The building block of a wireless LAN • BSS with an AP • Access Point (AP): central base station • BSS without an AP • Stand-alone network • Cannot send data to other BSSs • Ad hoc architecture • BSS with an AP • Called an infrastructure network Data Communications, Kwangwoon University

  3. BSS Data Communications, Kwangwoon University

  4. Extended Service Set (ESS) • BSSs are connected through a distribution system: infrastructure network (usually wired LAN) • Station Types: No-transition, BSS-transition, and ESS-transition mobility Data Communications, Kwangwoon University

  5. MAC Sublayer • Two MAC sublayers: DCF and PCF • DCF uses CSMA/CA as the access method Data Communications, Kwangwoon University

  6. CSMA/CA Flow Chart Data Communications, Kwangwoon University

  7. CSMA/CA and NAV • Network allocation vector (NAV) shows how much time must pass before these stations are allowed to check the channel for idleness • Collision During handshaking Data Communications, Kwangwoon University

  8. Point Coordination Function (PCF) • An optional access method that can be implemented in an AP • A centralized, contention-free polling access method • To give priority to PCF over DCF, another set of interframe spaces has been defined: PIFS and SIFS • PIFS (PCF IFS) is shorter than the DIFS  AP using PCF has priority • Repetition interval starts with a special control frame, called a beacon frame Data Communications, Kwangwoon University

  9. MAC Layer Frame Format Data Communications, Kwangwoon University

  10. Frame Types • Three categories of frames • Management frames for initial communication between stations and APs • Control frames for accessing the channel and acknowledging frames • Data frame for carrying data and control information Data Communications, Kwangwoon University

  11. Addressing Mechanism Data Communications, Kwangwoon University

  12. Hidden Station Problems • The CTS frame in CSMA/CA handshake can prevent collision from a hidden station. Data Communications, Kwangwoon University

  13. Exposed Station Problems Data Communications, Kwangwoon University

  14. Physical Layer • Industrial, scientific, and medical (ISM) band which defines three unlicensed bands in three ranges 902-928 MHz, 2.400-4.835 GHz, and 5.725-5.850 GHz Data Communications, Kwangwoon University

  15. Physical Layer • IEEE 802.11 FHSS • IEEE 802.11 DSSS Data Communications, Kwangwoon University

  16. Physical Layer • IEEE 802.11 Infrared • IEEE 802.11a OFDM • Common data rates are 18 Mbps (PSK) and 54 Mbps (QAM) • IEEE 802.11b DSSS • High-rate direct sequence spread spectrum (HR-DSSS) • Similar to DSSS method except for the encoding method called complementary code keying (CCK), Four data rates; 1, 2, .5, 11 Mbps • IEEE 802.11g • Forward error correction and OFDM using 2.4 GHz ISM, 22- or 54-Mbps data rate Data Communications, Kwangwoon University

  17. Bluetooth: Piconet • Bluetooth is a wireless LAN technology designed to connect devices of different functions such as telephones, notebooks, computers, cameras, printers, coffee makers, and so on. A Bluetooth LAN is an ad hoc network, which means that the network is formed spontaneously • Bluetooth network is called piconet, or a small net Data Communications, Kwangwoon University

  18. Bluetooth: Scatternet • Piconet can be combined to form what is called a scatternet. • Bluetooth device has a built-in short range radio transmitter with 2.4 GHz bandwidth. A possibility of interference with IEEE 802.11b Data Communications, Kwangwoon University

  19. Bluetooth Layers • Radio layer • 2.4 GHz ISM band divided into 79 channels of 1 MHz each • FHSS: Bluetooth hops 1600 times per second, dwell time is 625 μsec (= 1/1600 sec) • Modulation: GFSK (FSK with Gaussian bandwidth filtering) Data Communications, Kwangwoon University

  20. Bluetooth Layers • Baseband layer • TDD-TDMA (time division duplex TDMA): half-duplex communication • Single-secondary communication Data Communications, Kwangwoon University

  21. Bluetooth Layers • Baseband layer • TDD-TDMA: multiple-secondary communication Data Communications, Kwangwoon University

  22. Bluetooth Layers • Physical links • SCO (synchronous connection-oriented) • ACL (asynchronous connectionless link) • Frame format • L2CAP (Logical Link Control and Adaptation Protocol) • Multiplexing, segmentation and reassembly, QoS, group management Data Communications, Kwangwoon University

More Related