1 / 19

CEMENTITIOUS STABILISATION OF ROAD CONSTRUCTION MATERIALS: QUO VADIS

CEMENTITIOUS STABILISATION OF ROAD CONSTRUCTION MATERIALS: QUO VADIS. Phil Paige-Green, CSIR-Transportek, Pretoria Frank Netterberg Consultant. INTRODUCTION. Stabilisation of marginal materials is still an important part of road building in RSA

brenna
Download Presentation

CEMENTITIOUS STABILISATION OF ROAD CONSTRUCTION MATERIALS: QUO VADIS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CEMENTITIOUS STABILISATION OF ROAD CONSTRUCTION MATERIALS: QUO VADIS Phil Paige-Green, CSIR-Transportek, Pretoria Frank Netterberg Consultant

  2. INTRODUCTION • Stabilisation of marginal materials is still an important part of road building in RSA • Will probably become more important as good materials are depleted • Specification of stabilisation is based on: • COLTO Standard Specs for R&B (1996) • with assistance from Draft TRH 13 (1986)

  3. INTRODUCTION • Cement stabilisation experience incorporated in COLTO and TRH13 was based mainly on the use of: • Ordinary Portland Cement (SABS 471) • PBFC (SABS 626) • Portland cement blends (SABS 831) • Portland flyash cement (SABS 1466) • Things have changed !!

  4. SABS ENV 197-1 • In 1992, became a European pre-standard (ENV) • After 3 years should be upgraded to European standard (EN) ?? • Adopted “as is” by SABS in 1996 for RSA • Applicable to “common cements” • Similar spec for masonry cements (SABS ENV 413-1) • Concentrate on SABS ENV 197-1 as this is most relevant for roads

  5. NEW REQUIREMENTS • Totally different classification system • 5 cement types • 9 groups (depend on additive) • 19 subgroups (depend on composition) • Also classified by strength and rate of strength gain (6 additional permutations)

  6. CLASSIFICATION • I Portland cement • II Other Portland cements • Portland slag cement • Portland silica fume cement • Portland flyash cement • Portland limestone cement • Portland composite cement • III Blastfurnace cement • IV Pozzolanic cement • V Composite cement

  7. Strength requirements

  8. STANDARD DESIGNATION • Cement ENV 197-1 CEM I 32.5 • (equiv to OPC ?) • Cement ENV 197-1 CEM II/A-S 42.5

  9. CHEMICAL PROPERTIES

  10. PHYSICAL PROPERTIES

  11. PHYSICAL PROPERTIES (cont)

  12. STRENGTH

  13. Strength requirements

  14. CHEMICAL PROPERTIES

  15. PHYSICAL PROPERTIES

  16. PHYSICAL PROPERTIES (cont)

  17. STRENGTH

More Related