1 / 69

INDOOR AIR QUALITY

INDOOR AIR QUALITY. OFFICE OF RISK MANAGEMENT LOSS PREVENTION UNIT. PRE-TEST. Name some building locations where mold can be seen. Smoke poses no Indoor Air Quality problem. T / F. PRE-TEST. Ventilation systems can control and/or cause IAQ problems. T / F. GOALS.

bpope
Download Presentation

INDOOR AIR QUALITY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. INDOOR AIR QUALITY OFFICE OF RISK MANAGEMENT LOSS PREVENTION UNIT

  2. PRE-TEST • Name some building locations where mold can be seen. • Smoke poses no Indoor Air Quality problem. T / F

  3. PRE-TEST • Ventilation systems can control and/or cause IAQ problems. • T / F

  4. GOALS • Understanding/Reducing Mold Growth • Minimize/Prevent Mold & Poor Indoor Air Quality • Education in Prevention & Recurrence

  5. OBJECTIVES • Educate State agencies on Indoor Air Quality Issues • Provide control methods • Assist in addressing issues

  6. INTRODUCTION Keeping your workplace healthy is good business for employees • & • CAN INCREASE PRODUCTIVITY

  7. MOLD Causes & Routes of Exposure ASBESTOS Location & Health Hazards

  8. MOLD Definition: Organic substance that requires oxygen & water to grow. Mold breaks down plant matter by digesting for food.

  9. WITHOUT MOLD: • We would be struggling w/large amounts of dead plant matter. • We would not have penicillin

  10. MOLD cont. • All mold spores cannot, practically, be eliminated indoors • Can be managed by controlling indoor moisture

  11. MOLD cont. Growth Factors: • Moisture • ALL Surfaces • Temperature

  12. MOLD cont. • Moisture: • Leaks in pipes, roof, windows, etc. • HVAC systems

  13. MOLD cont. 2.Any Surfaces: Mold can exist on any surface!!! Examples include • Wood • Paper • Carpet • Food • Plastic • Rock

  14. MOLD cont. 3. Temperature: • Decreased temperature--air holds less moisture; promotes condensation • Increased temperature--air retains more moisture; promotes humidity

  15. MOLD cont.ROUTES OF EXPOSURE Sources that allow mold indoors: - Ventilation Systems - Papers & Books - Leaks • Attics • Behind Walls • Ceilings • Under Carpeting • Behind Furnishings

  16. MOLD--ROUTES OF EXPOSURE cont. Routes of Indoor Exposure

  17. MOLD Preventing/Reducing Mold Growth: • Find/repair internal leaks ASAP • Watch for condensation & wet spots • Prevent moisture/ condensation - Increase temperature or reduce humidity (below 60%) • Roof/window inspections–repair leaks ASAP

  18. MOLD Preventing/Reducing Mold Growth cont. 5. Regular building/HVAC inspections & maintenance 6. Keep heating & HVAC drip pans clean & flowing properly 7. Don’t let foundations stay wet – provide drainage

  19. If you only remember one thing: NEVER IGNORE A COMPLAINT-- DO SOMETHING!

  20. ASBESTOS

  21. ASBESTOS • Mineral fiber used in construction of insulation AND as a fire retardant • Found in: • Older buildings • Pipe & furnace insulation • Millboard • Floor tiles

  22. ASBESTOS cont. DANGEROUS ASBESTOS FIBERS ARE TOO SMALL TO BE VISIBLE If inhaled, can remain, accumulate in lungs & can cause: Lung cancer Mesothelioma Asbestosis

  23. ASBESTOS cont. • Do not cut, rip, or sand asbestos-containing materials • Inspect for damage or deterioration • Repair or removal should be done by a professional • Suspect asbestos, have professional check

  24. POSSIBLE ASBESTOS/LEAD EXPOSURE Identify aspects of projects: • Redecorating, renovation, remodeling • Relocation of personnel or functions • New construction

  25. ASBESTOS cont. If you suspect presence of asbestos: DO NOT DISTURB!!!!

  26. ASTHMA

  27. ASTHMA Indoor environmental asthma may be triggered by: - Secondhand smoke - Dust Mites - Mold

  28. ASTHMA cont. Environmental factors that stimulate asthmatic conditions: • Air we breathe • Surfaces we touch

  29. INDOOR AIR QUALITY IAQ Standards Good Indoor Air Quality Poor Indoor Air Quality Resolving/Correcting

  30. IAQ STANDARDS • Climate controlled environments can improve indoor air quality

  31. GOOD INDOOR AIR QUALITY (IAQ) • Introduce/distribute adequate air ventilation • Control airborne contaminants • Maintain acceptable temperature and relative humidity

  32. VENTILATION • HVAC systems typically mix outside air with recirculated indoor air. • To conserve heat and a/c, offices typically use a mix of about 20% fresh and about 80% recirculated air.

  33. POOR INDOOR AIR QUALITY Indoor Sources of Poor IAQ: • Disturbances of asbestos and/or lead, and formaldehyde (in pressed wood products) • Carpet • Copy machines • Dirty ventilation systems • Water-damaged walls

  34. POOR INDOOR AIR QUALITY--Indoor Sources of Poor IAQ (cont.) Ventilation Systems: • Poorly designed, operated or maintained • Not being used to conserve energy • Spreading contaminants through building

  35. POOR INDOOR AIR QUALITY--Indoor Sources of Poor IAQ (cont.) Use of Building: Portions used for specialized purposes - Restaurants - Print Shops - Dry Cleaning

  36. POOR INDOOR AIR QUALITY cont. • Neglect of Maintenance -Basic custodial duties -Reports of Hazards -Basic maintenance duties

  37. EQUIPMENT -HVAC Dust/dirt in ductwork Microbiological growth Improper use of cleaning compounds Improper venting Refrigerant leakage POOR INDOOR AIR QUALITY

  38. POOR INDOOR AIR QUALITY External Sources : • Pollen, dust, fungal spores • Industrial pollutants • General vehicular contamination • vehicle exhaust • fumes and gases

  39. POOR INDOOR AIR QUALITY External Sources (cont.) • Emissions from nearby sources: • Dumpsters • Parking areas or garages • Loading docks • Roads

  40. RESOLVING, CORRECTING, & REMEDIATION

  41. RESOLVING INDOOR AIR QUALITY PROBLEMS • SOURCES OF CONTAMINANTS • HVAC UNIT • PATHWAYS • DUCTWORK • OCCUPANTS

  42. Resolving Air Quality Problems HVAC System Operation & Maintenance • Operate system in manner consistent w/design • Maintenance & inspections on regular basis Record Keeping • All HVAC problems & routine maintenance & inspections • Document complaints & remedies

More Related