1 / 9

How to Stain Concrete

Do you know about stain concrete in el Paso is the best way to include color to an otherwise dull surface? Its processing time takes around two days, is relatively, and affordable. If concrete is new, then concrete should be cured entirely before staining, and it takes between 20 to 30 days. In the case, if you are adding a homeowner who loves a DIY challenge, then here are the some steps for staining concrete.

Download Presentation

How to Stain Concrete

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. HOW TO STAIN  CONCRETE Bomanite Artistic Concrete

  2. SCRUB THE AREA SPREAD THE ACID SOLUTION CLEAN UP & NEUTRALIZE THE STAIN TEST THE OLD CONCRETE SEAL THE CONCRETE Introduction

  3. DO YOU KNOW ABOUT STAIN CONCRETE IN EL PASO IS THE BEST WAY TO INCLUDE COLOR TO AN OTHERWISE DULL SURFACE? ITS PROCESSING TIME TAKES AROUND TWO DAYS, IS RELATIVELY, AND AFFORDABLE. IF CONCRETE IS NEW, THEN CONCRETE SHOULD BE CURED ENTIRELY BEFORE STAINING, AND IT TAKES BETWEEN 20 TO 30 DAYS. IN THE CASE, IF YOU ARE ADDING A HOMEOWNER WHO LOVES A DIY CHALLENGE

  4. Before starting you should decide what type of stain you will be using and color also. Recommended, Acid stain, because it is best for creating rich, water-based stains offer more color choices, are user- friendly, and safe. There are some differences between acid stain and Water-based stains, and the difference is how to apply? Firstly, Acid Stains require neutralization, and they need more time to react with the concrete, compared to water-based stains which need additional surface preparation for opening up the pavement. Type of Stain and color

  5. Materials of Staining Stain Neutralizer (for acid stain) Concrete Cleaner Etching Solution (for water based stains) Sealer RollerConcrete stripper(only for sealed concrete)Mask

  6. Scrub the area Before spreading the acid solution ensure that you’ve removed all the dirt from the area and made it completely clean. After that, start scrubbing the area with stiff brushes.

  7. Spread the acid solution Firstly put on boots, need safety goggles with a respirator before handling the acid and gloves. Mix acid into 1/4th of water in a plastic sprinkling can. Then shower the acid solution onto the concrete. Allow the acid for 30 minutes to neutralize the pavement, and then remove the acid with a broom and plenty of water.

  8. When once the stain has been applied, then have to required cleanup. Here is the cleanup process:Clean the concrete with clean water until the water clear.Neutralize the stain with T.S.P, baking soda. This is urgent if you are using an acid stain, or if you use water-based stains, then it doesn’t require neutralization.Use a soft brush to remove any residue before the final rinsing. Clean Up & Neutralize the Stain

  9. Stain Concrete TEST THE OLD CONCRETE SEAL THE CONCRETE Before staining all of the concrete use a small test area. You need an acid stain, just a few areas of concrete and see its results. It is not necessary that you have to seal your acid stained, but we strongly suggest doing that. If you have applying sealer, then they will help maintain your stain concrete.

More Related