slide1 l.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
Saving and Restoring the PLC PowerPoint Presentation
Download Presentation
Saving and Restoring the PLC

Loading in 2 Seconds...

play fullscreen
1 / 55

Saving and Restoring the PLC - PowerPoint PPT Presentation


  • 59 Views
  • Uploaded on

Saving and Restoring the PLC. 2. 1. Saving the PLC (LADDER). External Media. NC HN123card (Virtual: COS2 Side). Project Save. Project Open. NC HN482card (SRAM/FROM). NC HN163card (Real: COS1 side). PC side. Temporary Storage Area. FROM area. ROM Write. Save. Area for COS1.

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about 'Saving and Restoring the PLC' - blithe


Download Now An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
slide2

2

1

Saving the PLC (LADDER)

External

Media

NC HN123card

(Virtual: COS2 Side)

Project

Save

Project

Open

NC HN482card

(SRAM/FROM)

NC HN163card

(Real: COS1 side)

PC

side

Temporary

Storage

Area

FROM area

ROM Write

Save

Area for

COS1

Onboard

Edition

area

Copy When

Power is on

Open

Area for

COS2

Execute Ladder

Edit/Monitor

1. Open ladder which is running in the NC on onboard edition area.

2. Save the opened ladder to the external media(USB, hard drive, etc)

Page 42 Matrix Maint Manual

slide5

COS1

COS2

Versions of Ladders

Press LADDER MONITOR soft key

Drawing

slide8

Select M01 on drop down menu and Press SET soft key

Press far left F1Display Menu Key once to get the first screen menu

slide9

Step 1 (Open PLC)

Press NC FILE soft key

slide12

Drawing

Press OK soft key

Press F1 Display Menu Key twice to get the first screen menu

slide13

Step 2 (Save Project to External Media)

Press EXTERNAL FILE soft key

slide16

Press DRIVE/PATH and select drive D for USB port D:\M01

Press PROJECT NAME and name ladder preferably with version

slide22

Repeat all of the previous steps

  • Select M02 for virtual ladder save
slide23

Restoring the PLC (LADDER)

STEPS:

1. Clear the ladder which runs in temporary storage area

2. Open the project saved in external media onto the onboard edition area

3. Load the opened ladder to the temporary storage area in the NC

4. Save the ladder into the ROM area(HN482 card)

If steps 2 and 3 are performed without deleting the ladder in step 1 then there will

be two different ladders registered

Must be in Privileged Mode to upload ladder

Page 45 Matrix Maint Manual

slide24

2

4

1Erase Ladder

3

External

Media

NC HN123card

(Virtual: COS2 Side)

Project

Open

Project

Save

NC HN482card

(SRAM/FROM)

NC HN163card

(Real: COS1 side)

PC

side

Temporary

Storage

Area

FROM area

ROM Write

Save

Area for

COS1

Onboard

Edition

area

Copy When

Power is on

Open

Area for

COS2

Execute Ladder

Edit/Monitor

slide30

Select M01 on drop down menu and Press SET soft key

Press far left F1Display Menu Key once to get the first screen menu

slide31

Step 1

Press NC FILE soft key

Drawing

Drawing

slide34

All files should be checked

Press DELETE Soft key

slide37

Press OK Soft key

Press F1 Display Menu Key twice to get the first screen menu

slide38

Step 2

Notice Message Displayed

Press EXTERNAL FILE Soft key

Drawing

Drawing

slide43

Make sure all files are checked if not press

SEL. ALL/CANCEL Soft key

Press OPEN Soft key

slide44

May or May not get this message

Press ALL YES Soft key

slide45

Press OK Soft key

Press F1 Display Menu Key twice to get the first screen menu

slide46

Step 3

Drawing

Drawing

Press NC FILE Soft key

slide50

Step 4

Press ROM WRITE Soft key

Drawing

Drawing

slide52

Very Important Step !

Press YES Soft key again to write ladder onto the ROM

slide53

Press OK Soft key

Press far left F1Display Menu Key once