1 / 41

Composite materials

Composite materials. John Summerscales Advanced Composites Manufacturing Centre School of Marine Science and Engineering University of Plymouth. Newton’s second law of motion. Force = mass x acceleration (F = ma) reduce mass same performance with smaller engine, or

blais
Download Presentation

Composite materials

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Composite materials John Summerscales Advanced Composites Manufacturing Centre School of Marine Science and Engineering University of Plymouth

  2. Newton’s second law of motion • Force = mass x acceleration (F = ma) • reduce mass • same performance with smaller engine, or • improved performance with the same engine • relative densities (vs water at 1000 kg/m3) • 8000 steel • 2700 aluminium • 2000 glass fibre reinforced plastics • 1500 carbon fibre reinforced plastics

  3. Materials • fibres • aramid: orange light tough (e,g, Kevlar) • carbon: black stiff brittle expensive conductor • glass: transparent tough inexpensive • polymers • thermoplastics: heat-form-cool • thermosets: liquid reactive mixture

  4. Basic rule-of-mixtures 1 • Elastic properties (e.g. density or modulus) of composite calculated by rule-of-mixtures • EC = ηL . ηO . Vf . Ef + Vm . Em • if the first term of the equation is large,the second term can be neglected

  5. Basic rule-of-mixtures 2 • EC= modulus of composite • ηL = fibre length distribution factor • ηO = fibre orientation distribution factor • Vx = volume fraction of component x • Ex = modulus of component x • subscripts f and m are fibre and matrix respectively

  6. Basic rule-of-mixtures 3 ηL = fibre length distribution factor • 1 for continuous fibres • fractional for long fibres • 0 if fibre below a “critical length”

  7. < Tension < Shear Variation of E with fibre length:fibre length distribution factor ηl • Cox shear-lag • depends on • Gm: matrix modulus • Af: fibre CSA • Ef: fibre modulus • L: fibre length • R: fibre separation • Rf: fibre radius

  8. Basic rule-of-mixtures 4 ηO = fibre orientation distribution factor • a weighted function of fibre alignment, essentially cos4θ: • 1 for unidirectional • 1/2 for biaxial aligned with the stress • 3/8 for random in-plane • 1/4 for biaxial fabric on the bias angle

  9. Variation of E with angle:fibre orientation distribution factor ηo

  10. Basic rule-of-mixtures 5 • Vf = fibre volume fraction • 0.15-0.3 for random • 0.35-0.6 for fabrics • 0.6-0.75 for unidirectional • consolidation pressure: • no pressure gives low value above • Vf increases with pressure

  11. Basic rule-of-mixtures 6 • Ef = elastic modulus of fibre • glass = ~70 GPa (equivalent to aluminium) • aramid = ~140 GPa • carbon = ~210 GPa (equivalent to steel) • figures above are lowest values i.e. for standard fibres

  12. Glass transition temperature (Tg) • Tm = crystalline melting point • Temperature at whichsegmental motion of the chain is frozen out • below Tg polymer is elastic/brittle • above Tg polymer is viscoelastic/tough • more rigorous than heat distortion temperature • Tg for thermoplastics = Tm - ~200°C • Tg for thermosets follows cure temp.

  13. Matrix cracking maxmin • polyester resin ε’ = 0.9-4.0 % • vinyl ester ε’ = 1.0-4.0 % • epoxy resin ε’ = 1.0-3.5 % • phenolic resin ε’ = 0.5-1.0 % • data from NL Hancox, Fibre Composite Hybrid Materials, Elsevier, 1981.

  14. Fibre fracture • S/R-glass ε’ = 4.6-5.2 % …. • E-glass ε’ = 3.37 % ……….… • Kevlar 49 ε’ = 2.5 % …….………. • HS-carbon ε’ = 1.12 % ……………..… • UHM-carbon ε’ = 0.38 % …………………. • data from NL Hancox, Fibre Composite Hybrid Materials, Elsevier, 1981.

  15. Fibre-matrix debonding • Crack can run through (not shown), or around the fibre • NB: ~12000 carbon or 1600 glass UD fibres/mm2 c b a

  16. Fibre-matrix debonding:

  17. Delamination of layers • one layer is a lamina (plural = laminae) • several layers in a composite is a laminate • separation of the layers is delamination • to avoid delamination • 3-D reinforcement (often woven or stitched) • Z-pinning

  18. Fibre pullout • as parts of a fractured composite separate, the fibres which have debonded can fracture remote from principal fracture plane. • energy is absorbed by frictional forcesas the fibre is pulled from the opposite face • debonding and pullout absorbs high energies and results in a tough material

  19. Marine Composites: state-of-the-art • Swedish Navy Visby stealth corvette • 600 tons - 72 m long - FRP sandwich • Royal Navy mine counter measures vessels • 725 tons - 60 m long - monolithic GRP

  20. Marine Composites: state-of-the-art • VT Mirabella V sloop rigged yacht • 740 tonnes - 75.2 m long - 90 m mast • CFRP/GRP/polyolefin foam

  21. Marine leisure • Power-boats: racing/“gin palaces” • Sailing: ocean racing thro’ boating lake • Diving: wet-suits and air-tanks • EnvironComp (Halmatic GFRPP boat) • EU BE-3152 : BRPR-CT96-0228 • Research, development and evaluation of environmentally friendly advanced thermoplastic composites for the manufacture of large surface area structures

  22. Formula 1 • http://www.mclaren.co.uk/ • http://ourworld.compuserve.com/homepages/john_hopkinson/williams.htm

  23. Road cars • McLaren F1 road car http://www.cottingham.co.uk/macf1/road.htm

  24. Road cars • Lotus Elise S2 • Reliant Robin 65 (2000)

  25. Caparo Freestream T1 Graham HalsteadUoP composites graduate – now with McLaren Racing

  26. Dimitris Katsanis • BEng CME graduate (project & Olympics)

  27. Railways • Inter-City 125 locomotive cab http://home-2.worldonline.nl/~fgvdhurk/hst.htm

  28. Aircraft specifications

  29. Aerospace: Airbus A380 The world’s only twin-deck, four-aisle airlinerThe airlines’ solution to growing demand for air travelThe green giant, more fuel-efficient than your carThe dedicated three-deck 150 tonne long-range freighter

  30. Aerospace: defence • Joint Strike Fighter (F-35)

  31. Biomimeticshttp://www.rarebirdphotography.co.uk Common Tern Ivory Gull Squacco Stone Curlew

  32. Aerospace: defence • Grumman X-29 FSW aircraft 1984 to 1992 http://www.globalsecurity.org/military/systems/aircraft/x-29.htm

  33. Wind energy Vestas Blades UK Limited (formerly NEG-Micon ) Isle of Wight wind turbine blades up to 42 m developed with ACMC Plymouth

  34. Key features: offshore wind farm • Middelgrunden • windfarm length of 3.4 km near Copenhagen, Denmark • 20 turbines, each 2 MW • 60 m hub height, 76 m rotor diameter. • water depth of 2-6 metres • modified corrosion protection,internal climate control, built-in service cranes. • 85 000 MWh pa (3% Copenhagen's needs) • construction March 2000 to March 2001 • http://www.worldenergy.org/wec-geis/publications/reports/ser/wind/wind.asp

  35. Rehabilitation of civil engineering structures • London Underground tunnels

  36. Bridge structures • Aberfeldy footbridge over River Tay

  37. Internet resource for composites Teaching support materials for MATS324Composites design and manufacture:https://www.fose1.plymouth.ac.uk/sme/mats347 Case studies: offshore structures, naval vessels, yacht hulls, canoes, sailcloth.https://www.fose1.plymouth.ac.uk/sme/composites/marine.htm Case studies: bridges https://www.fose1.plymouth.ac.uk/sme/composites/bridges.htm

  38. BEng Mechanical Engineering with Composites • Year 1 common with Mech Eng/Marine Tech • Year 2 common with Mech Eng • Year 3 in industry ? • Year 4: 40 credits for composites pathway • composites design and manufacture (20 credits) • selection, characterisation, stress analysis & manufacture • composites engineering (20 credits practical) • mountain bike suspension/bike front forks • yacht winch handle • skaters trolley/dinghy launching trolley

  39. Composites graduate destinations • Aerospace • Air France, Airbus (UK & F), BAe, GKN etc • Formula 1 • Benetton, McLaren, Team Toyota, Williams • Automotive • Aston Martin Lagonda, BMW (D), • Pininfarina (D), TWR Leafield • Marine • Carbospars (ES), Princess, Sunseeker

  40. Professional registration • BEng/MEng (honours)Mechanical Engineering with Compositesis accredited for Chartered Engineer withIOM3 (which hosts British Composites Society) and IMechE

  41. To contact me • Dr John Summerscales • Reynolds Building Room 008  01752.5.86150  07753.56.8733 • 01752.5.86101 • jsummerscales@plymouth.ac.uk • http://www.plymouth.ac.uk/staff/jsummerscales

More Related