1 / 32

Next Generation System in a Package Manufacturing

Next Generation System in a Package Manufacturing. Lars Böttcher Fraunhofer IZM Berlin lars.boettcher@izm.fraunhofer.de. Outline. Introduction to Chip Embedding Technology HERMES Project Technology Process overview QFN Package realization Ultra fine line Ultra Fine pitch Applications

betha
Download Presentation

Next Generation System in a Package Manufacturing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Next Generation System in a Package Manufacturing • Lars Böttcher • FraunhoferIZM Berlin • lars.boettcher@izm.fraunhofer.de

  2. Outline • Introduction to Chip Embedding Technology • HERMES Project • Technology • Process overview • QFN Package realization • Ultra fine line • Ultra Fine pitch • Applications • Conclusions

  3. Interconnect Evolution µVias LDI Embedding HDI PCBs technology challenge / potential Flip Chip progress of organic substrates enabled advance in interconnect technology chip & wire 1970 1990 2010

  4. Chip Embedding - Technology Progress Chip Embedding in organic substrates  use of PCB technology & material • Production started • Korea • Japan • First Standard • JPCA • EU Companies • ready Basic R&D Production Demos Production First Patent 2005 2010 2000 1968

  5. Chip Embedding - Different Approaches Chip Last / Pad Connection Chip First / Via Connection core assembly embedding • use of pre-tested cores • different interconnect technologies (wires, solder, adhesives) • contact by micro vias • chip assembly in PCB flow • highest possible miniaturization pictures: Shibata, JPCA

  6. Chip First Embedding - Process Alternatives Face Up Face Down die placement embedding via formation plating & etch electrical and thermal backside contact better fine pitch capability

  7. HERMES High Density Integration by Embedding Chips for Reduced Size Modules and Electronic Systems Please visit: www.hermes-ect.net for more information • Project • EU funded project, FP 7 program, Started: May 2008, Duration: 36 month • Total budget (approx.): 16 M€ • Project Goal • Industrialization of the results of the HIDING DIES project • Improvement of technology towards finer pitch, use of new material developments, process innovation and equipment improvements • Strong focus on future implementing of the technology in a manufacturing environment / assembly chain • Consortium • 11 partner; technology provider, end-user, testing, research institutes • Early Adopters Group with potential end-users

  8. HERMES – Technology Development Roadmap • Industrialization Goals • manufacturing panel size 18"x24" • lines/spaces 25 µm, semi-additive technology • die pitch 125 µm peripheral, 250 µm area array • stacking of 2 levels with embedded chips • Demonstrator Applications • Power module for house hold (4 ICs, large power dissipation) • Communication modem (> 10 ICs, high complexity) • Motor control unit (high-end micro controllers) • Secure phone module • Advanced Technology Goals • lines/spaces 15 µm, semi-additive technology • die pitch 60 µm • stacking of 2 levels with embedded chips

  9. Outline • Introduction to Chip Embedding Technology • HERMES Project • Technology • Process overview • QFN Package realization • Ultra fine line • Ultra Fine pitch • Applications • Conclusions

  10. Process Flow Face-Up Embedding • Panel format 610 x 456 mm² • 50 µm chips with 5 µm Cu or Ni/Pd pad metallization • Die attach (Dataconevo/Siplace CA3) using 20 µm DDAF (dicing die attach film) • Embedding (Lauffer) by RCC lamination (5 µm Cu, 90 µm dielectric) • UV laser drilling (Siemens Microbeam) of microvias • Cu electroplating / via filling • Dry film resist application • Laser Direct Imaging (Orbotech Paragon 9000) of circuitry pattern • Subtractive Cu etching Lamination Via drilling Cu Plating Imaging Etching

  11. Process Flow Face-Up Embedding a) Die Bonding to substrate d) Copper metallization b) Vacuum lamination e) Patterning of circuitry c) Laser drilling of micro via

  12. Embedded QFN • Embedded die package test vehicles • QFN type  single package • BGA type  stackable package • size 10x10 mm² / thickness approx. 140 µm • 84 I/Os, 400 µm pitch • chip size 5x5 mm / chip pitch 100 µm • Realized on panel size: 350x250 mm² BGA type QFN type

  13. Embedded QFN – Process Chip preparation and Die Bond • Wafer preparation • Application of suitable pad metallization (Cu or Ni/Pd) • Thinning to 50 µm and dicing • Die bond material • Application of DDAF prior to dicing • Requirements • handling of very thin chips (50 µm) • very high placement accuracy essentially for following process steps Die bonded chips on copper substrate

  14. Chip Substrate Adhesive Embedded QFN – Process Dielectric lamination • Lamination • embedding of chips by vacuum lamination of RCC • use of epoxy-based RCC • optimized lamination profile to ensure void and damage free embedding of Si chips • no chip movement during lamination process Epoxy x-section embedded Si chip

  15. Embedded QFN – Process Micro via formation • Laser drilling • pulsed UV laser, enabling ablation of metal and epoxy layers • Development towards smaller via diameter needed: target 30 µm UV Laser drilled via, 30µm diameter

  16. Embedded QFN – Process Desmear and Cu plating • Strong increase of via diameter after desmear process by more than 50% • Adaption of process parameters • Defect free copper filling of micro via Improvement in desmear process Desmear + Copper plating

  17. Embedded QFN – Process • Fine Line copper structuring • Wiring structure sizes 50µm lines/space (subtractive): • Use of laser direct imaging system with local alignment option • 25µm thick DFR • Acidic spray etching of structures Etched wiring structure Etched wiring structure (detail) Resist mask

  18. Embedded QFN • Test vehicle for: • Reliability testing • Easy electrical testing • Processing on large panel format • overall thickness 160 µm • standard QFN footprint • Automated testing using QFN test board: • daisy chain • four point Detail

  19. QFN Package reliability • Reliability testing • Passed: preconditioningwith MSL3 (192h, 30°C/60%RH) (JEDS22-113-E) • Passed: TC (-55 ° C/125 ° C, 1000cycles), HTS (150 ° C, 1000h), THS (85 ° C/85%, 1000h) • Delamination at resin/chip and DAF/chip at PCT (168h, 121C, 100%RH, 2 atm) PCT Resin/chip delamination PCT DAF/FR4 delamination

  20. QFN Package reliability • Warpage • No symmetrical lamination • Improvement with 100µm FR4 • Embedding resins with high Tg and fibers 100µm FR4 50µm FR4 • Warpage reduction from 200µm to 20µm with increased substrate thickness

  21. Ultra fine line development • Exposure by Laser Direct Imaging (LDI) • Maskless processing capable of large substrate sizes • 25µm thick dry film resist (DFR) • Goal: 15 µm L/S pattern on PCB • Reliable development of resist structures Resist removal Cu base etched

  22. Ultra fine line development • Ultra fine line copper structuring • Goal: 15 µm line/space • Thin (2 µm) base copper foil • Suitable dry film resist and substrate preparation (resin thickness & adhesion) • Dry film resist removal • Use of thin copper foils to enable reliable differential etch of initial Cu layer x-section 15 µm L/S after Cu plating x-section 15 µm L/S after differential etch

  23. Ultra fine pitch development Future Development  Via-less Embedding • Cu lines are formed indirect contact to Cu bumps • no drilled vias • much less constraints in tolerances • expectation 50 µm pitch • under development

  24. Outline • Introduction to Chip Embedding Technology • HERMES Project • Technology • Process overview • QFN Package realization • Ultra fine line • Ultra Fine pitch • Applications • Conclusions

  25. Where to use Embedding? Complex Systems Packages / System in Packages / Modules one / few components many different components  high risk in yield

  26. top RCC 2 top RCC 1 top chip adhesive adhesive bottom chip bottom RCC 1 bottom RCC 2 Applicatio - Dual chip package • Dual Chip package • Two + two build up layer • Package outline 15 x 15 mm² • 120 µm Pad pitch • Min. L/S: 50 µm • Challenges • Die bonding on both substrate sides • High wiring complexity and density • Multiple build up layer cross-section of dual chip SiP

  27. Application - Dual chip package • System in Package BGA Module • Two embedded Si chips of 50µm thickness • Five Cu routing layers • stacked micro vias • Overall package thickness: 450µm • JEDEC Level 2A passed • 1000 cycles -55 / + 125 °C passed • 1000 h 85 °C / 85 % r. h. passed cross-section of complete SiP

  28. Application - Power Packages • Cooperation with Infineon Technologies • Embedding offers a technology platformenabling a large variety of packages • different package types realized • reliability qualification passed • advantages • low inductances • low resistance • reduced cost SMD package with embedded MOSFET

  29. Multi Chip Package • Package containing two power IC and a logic IC • Challenge: Combination of required thick Cu metallization for power chip with fine pitch requirement of logic chip

  30. Outline • Introduction to Chip in Polymer - Embedding Technology • HERMES Project • Technology • Process overview • QFN Package realization • Ultra fine line • Ultra Fine pitch • Applications • Conclusions

  31. Conclusion • Embedded Chip Technology • Next generation package realization by embedding of bare dies into laminate layers • Industrialization of the technology within the “HERMES” project • Realization of different packages: • Single and multi die packages • reliability comparison to conventional packages • Further developments target: • Ultra fine pitch chips with peripheral pad pitch down to 60 µm • Ultra fine line development towards 15 µm lines/space using semi additive processing • Wide range of laminate materials for embedding • Transfer of technology to new process line, capable of substrate sizes up 610 x 456 mm²

  32. Thank you very much for your attention! Contact: Lars.Boettcher@izm.fraunhofer.de

More Related