1 / 43

Personal Protective Equipment and Ladder Safety

Personal Protective Equipment and Ladder Safety. Personal Protective Equipment. When to wear or use!. Types PPE We Use. Head Protection Hard Hat Eye Protection Safety Glasses Foot Protection Boots Personal Protection Reflective Clothing. Head Protection. Why do we wear hard hats?

bernad
Download Presentation

Personal Protective Equipment and Ladder Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Personal Protective EquipmentandLadder Safety

  2. Personal Protective Equipment When to wear or use!

  3. Types PPE We Use • Head Protection • Hard Hat • Eye Protection • Safety Glasses • Foot Protection • Boots • Personal Protection • Reflective Clothing

  4. Head Protection • Why do we wear hard hats? • Protect us from overhead hazards • Electrical • Object • When should we be wearing a hard hat? • When there is an overhead hazard. • At Armstrong we are required to wear them at all times when outside in the field as well as in unfinished basements and attics.

  5. Head Protection • Maintenance and Care • Your hard hat should be kept clean and inspected regularly. • If it cannot be cleaned with soap and water, replace the hard hat; do not use solvents. • No paint, decals, names or unauthorized material should be attached • No holes shall be bored or punched through any part of the hard hat.

  6. Eye Protection • Safety glasses should be worn at all times while working in the field including while working in customers homes. • They are also required when working in the office or warehouse and performing any task where there is the possibility of eye injury. • All safety glasses must meet requirements of ANSI Z-87.1-2003.

  7. Eye Protection • Maintenance and Care: • Safety glasses and goggles should not be left lying around or stored among tools where they can be damaged. • To clean eye protective devices, use soap and hot water only. NEVER use any solvents, gasoline or similar cleaning substances which could cause skin or eye irritations.

  8. Reflective Safety Vest • All workers exposed to the risks of moving roadway traffic or construction equipment must wear high-visibility safety apparel. • High-visibility safety apparel must meet the class two or three requirements of ANSI 107-2004.

  9. Footwear • Employees working in the field • a minimum 8" upper • arch support • Defined heel. • Employees involved in warehousing operations • Steel or safety toe boots

  10. Gloves • Work Gloves • Leather, leather faced or cloth work gloves are recommended whenever climbing a pole or working with coarse materials such as cable, wire, rope, etc. • Gloves shall NOT be worn when working around the moving parts of machinery.

  11. Ladder Safety

  12. General Rules for all Ladders

  13. General Rules for all Ladders • Only Fiberglass ladders should be used; metal or wood ladders are not acceptable. • Why not metal or wood? • Metal ladders are conductive • Wood ladders are heavy, less durable, must be coated, and can become conductive.

  14. General Rules for all Ladders • What is wrong in the picture? • Care must be taken to select the proper size and type of ladder for the job. • Ladders shall only be used for the purpose intended by the manufacturer.

  15. General Rules for all Ladders • When ascending or descending ladders, workers are to face the ladder and use both hands to hold on. • Employees shall maintain three points of contact at all times while ascending and descending. • Materials shall never be “hand carried” up or down a ladder.

  16. General Rules for all Ladders • Ladders should not be used horizontally as runways or scaffolds. • Ladders must not be stored near radiators, stoves, steam pipes, or in places where they may be subject to extreme heat or dampness. • Ladders must not be stored in a vertical position.

  17. General Rules for all Ladders • Defective or damaged ladders must not be used and must be taken out of service. • If a ladder is taken out of service because of a defect, waiting for repair, or being discarded, it will be marked "DANGEROUS-DO NOT USE."

  18. General Rules for all Ladders • Never leave a ladder upright unattended! • What could happen? • Never try to "hop" or "walk" a ladder. Reposition the ladder after descending it first. • Never outreach while working on a ladder. If you must extend your breastbone beyond the ladder rail to reach an object, descend the ladder and reposition.

  19. Ladder Inspection

  20. Ladder Inspection • How often should you inspect your ladder? • EVERYDAY before use.

  21. Ladder Inspection • The inspection should include the following items: Hardware Accessories Cables Damaged or loose rungs Rivets Working footpads Working pole strap Fittings Ropes Side rail connections Acid or alkali damage Rung-to-side rail connections Working strand hooks Fully operational spreader

  22. Ladder Inspection • Do you think this guy inspected his ladder?

  23. Extension and Straight Ladders

  24. Rules for Extension Ladders • Never put your hands through rungs when raising or lowering. • Never climb any higher than three rungs from the top of the fly section. You could lose your balance. • Belting On – Not OSHA requirement but a good idea! • At the pole • On a Mid-span

  25. Handling • Always Plan Ahead! • Before picking up your ladder plan your route. • Inspect it for overhead and tripping hazards • Look for holes and depressions in the ground. • Avoid tree branches, overhead drop wires, and other aerial obstructions. • Use caution when moving ladders in high traffic areas.

  26. Setup • Ladders should be setup at approximately a four-to-one ratio. • That is, for every four feet high the ladder extends, it should be one foot out at the base. • An arm extension will be close.

  27. Setup • Feet should be set properly Firm Base Soft Base Set the feet on the pads Set on the spikes and seat the ladder in the ground.

  28. Setup • Only ladders that are equipped with a strand hook/v-rung assembly should be used on a pole or strand. • When a ladder is placed on the strand, the strand hooks must be “engaged” with the strand.

  29. Setup • Extend the ladder at least three rungs (three foot minimum) above any roof, eave or parapet if you must step onto the roof. • Always check to be sure the extension locks are properly seated.

  30. Setup • What should we do before climbing a ladder using a pole for support? • Inspect the pole • Prod test • Hammer test • Hand-line test

  31. Setup • Protect your ladder from traffic. • When possible avoid setting your ladder up where it is exposed to traffic. • If absolutely necessary to setup your ladder where it is exposed to traffic use you van to shield your ladder. • Don’t put you van to close to your ladder.

  32. Transportation • There are many types of ladder transportation fixtures on the vehicles we use. However, there are a few common denominations needed to safely move our ladder from job to job. • The fixture must be substantial in strength to support the weight of the ladder. • At no time should the ladder be allowed to slide forward or backward possibly falling off the vehicle. • Using makeshift tie downs, such as ground wire or drop cable, to fasten the ladder to the vehicle is prohibited.

  33. StepLadders

  34. Rules to Observe • Spreaders must be fully extended and locked before climbing. • A stepladder should not be used in place of an extension or straight ladder.

  35. Rules to Observe • Employees must not stand on the top step of a stepladder. • When the ladder is not high enough for the job, get a taller stepladder or use another type of ladder.

  36. Rules to Observe • Tools or materials should not be placed on the steps of ladders. • All ladders should be kept clean of dirt and grease.

  37. Lets see if you learned anything! Yes, the upcoming pictures are staged!

  38. What’s wrong in this picture?

  39. What’s wrong in this picture?

  40. What’s wrong in this picture?

  41. What’s wrong in this picture?

  42. What’s wrong in this picture?

  43. The End Please be Safe!

More Related