1 / 29

Spreading Solid Manure

Spreading Solid Manure. Factors Affecting Application. Width of spread Speed of the tractor Density of the manure/compost Changes across the width of spread. Calculate How Much to Spread. Base the amount of manure on the amount of nitrogen the crop needs

benoit
Download Presentation

Spreading Solid Manure

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Spreading Solid Manure

  2. Factors Affecting Application • Width of spread • Speed of the tractor • Density of the manure/compost • Changes across the width of spread

  3. Calculate How Much to Spread • Base the amount of manure on the amount of nitrogen the crop needs • By knowing the field size you can calculate the weight of manure to be applied

  4. Good Distribution Important • Manure or compost should be spread uniformly • To get the best crop yields • To maintain the best water quality • Non-uniform application • Uneven crop growth and production • Poor yields

  5. Soil Compaction With heavy machinery we worry about soil compaction in the U.S. With loads under 4500 kg/axle compaction should not be a problem

  6. Spreaders • Different types of solid manure spreaders • Rear delivery spreaders • Side delivery spreaders

  7. Rear Delivery Spreader

  8. Rear Delivery Spreader

  9. The Load Moves Back as the Manure is Distributed onto the Ground

  10. Rear Delivery Spreader Note the narrow distribution pattern

  11. Side Delivery Spreader Wider distribution pattern

  12. ISU Research • ISU research looked at distribution across the machine width and along the direction of travel

  13. Laid Out Plastic Trays

  14. Drive Across the Trays

  15. Weigh the Amount on Each Tray

  16. Swath = 25 ft Rate = 20,820 lb/ac CV = 82 Fall ‘01

  17. Swath = 12.5 ft Rate = 35,700 lb/ac CV = 40 Fall ‘01

  18. Swath Width • The swath width…distance between each pass with the spreader…was ½ the total width of throw. The overlap evens out the decreasing application rate near the edges. Pass #1 2 3 4 5

  19. Application Rate Notice the application rate of the manure. By making such close swath widths (3.8m wide) the application rate is very high…35,700 lb/ac (40,067 kg/ha) of manure Nutrients will be over applied and wasted Water quality will be threatened by the excess nutrients

  20. Side Delivery Spreader

  21. Swath = 75 ft Rate = 2430 lb/ac CV = 39 Fall ‘01

  22. Swath = 37.5 ft Rate = 4260 lb/ac CV = 41 Fall ‘01

  23. Application Rate • Notice the application rate of the manure. • By making wide swath widths (11.5m wide) the application rate is still low…4260 lb/ac (4770 kg/ha) of manure, even with the overlaps • Nutrients can be applied heavier by driving slower to achieve the desired application rate • Water quality will not be threatened by the excess nutrients

  24. Hand Distributed Manure You can control the distribution very closely when distributing manure by hand…both the uniformity and the amount

  25. Manure Uniformity • Uneven distribution is a problem, as we have seen, even when manure has uniform nutrient content • If the manure is not uniform, getting good nutrient distribution is nearly impossible • Composting helps make the manure more uniform

  26. Conclusions from ISU Study 1. Distribution across-the-swath is more variable than in the travel direction. 2. For a rear-delivery, beater-type spreader, heaviest application is between or near the wheelbase.

  27. Conclusions (Cont.) 3. Uniformity increases when application swath is adjusted so that overlap occurs at ½ the peak application rate. 4. Load position did not affect distribution uniformity, but faster apron speed improved uniformity.

  28. Example of Overlap 50% overlap Resulting uniform distribution

  29. Conclusions (Cont.) 5. Application rate of a side-delivery spreader is lower than a rear-delivery, beater-type spreader. 6. A deflector may assist in directing throw on a side-delivery spreader.

More Related