1 / 17

Urban Stormwater R unoff Contamination Associated with Gutter and Pipe M aterial U se

Urban Stormwater R unoff Contamination Associated with Gutter and Pipe M aterial U se. Olga Ogburn 1 and Robert Pitt 2 1 Graduate Student; Civil, Construction, and Environmental Engineering Department; The University of Alabama

bendek
Download Presentation

Urban Stormwater R unoff Contamination Associated with Gutter and Pipe M aterial U se

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Urban Stormwater Runoff Contamination Associated with Gutter and Pipe MaterialUse Olga Ogburn1 and Robert Pitt2 1 Graduate Student; Civil, Construction, and Environmental Engineering Department; The University of Alabama 2 Ph.D., P.E., BCEE, D.WRE Cudworth Professor of Urban Water Systems; The University of Alabama http://www.slatetileroofing.com/gallery/images/allred_roof_systems_gallery/copper/copper_gutters.jpg

  2. The Goal • To determine how stormwater quality is affected by the type of gutter and pipe materials, environmental parameters causing degradation of the material, time of contact, and interactions of those factors.

  3. Prior Research • Contribution of rooftop material to runoff water quality, for example: • Zinc concentrations from uncoated galvanized metal ranged between 3.5 and 9.8 mg/L (Clark, Long et al., 2008). • Zinc concentrations from coated galvanized metal were below 0.5 mg/L (Clark, Long et al., 2008). • Effect of pipe material and environmental parameters on drinking water quality, for example: • Iron concentration from PVC pipes reached 0.058 mg/L after 3 days of exposure (Lasheen M.R., Sharaby, C.M., et. al, 2008).

  4. Experimental Design • A series of long-term static leaching tests • Eight roof and pipe materials • Low and high pH condition • Natural storm water was collected in the city of Tuscaloosa from downspouts and from storm drain inlets.

  5. Materials: • Gutter Materials: vinyl, aluminum, copper, and galvanized steel. • Pipe Materials: concrete, HDPE, PVC, and galvanized steel. • New materials • Concrete pipes - 15 cm long • The rest of pipes - 30 cm long

  6. Experimental Design • Containers with pH values of 5 and8 (using Na2HPO4 * 2H2O and KH2PO4 to create buffers) • Sampling times: time zero, 0.5 hr, 1 hr, 27 hr, 1 mo, 2 mo, 3 mo Measured Parameters: • Metals (cadmium, chromium, lead, copper, zinc, aluminum, and iron) • Toxicity (Microtox) • pH • Nutrients (ammonia nitrogen, total nitrogen, nitrate)and COD

  7. 1 • Lead release was observed only for galvanized steel materials during both short and long exposure times. • The loss of lead was higher for containers with pH 8 compared to containers with pH 5. • The highest lead release was noted for galvanized steel pipe at pH 8 and was between 0.628 – 0.710mg/L (corresponds to 25 - 30mg/m2).

  8. 0.001 0.01 0.1 1 10 • The highest copper release was observed from copper materials. After 27 hr of exposure copper release was more than 6 mg/L (up to 970 mg/m2). • Copper release was also found in containers with other materials but in much lower concentrations.

  9. Lower and slower copper release was observed at higher pH

  10. Zinc losses were the highest for galvanized steel materials • Copper materials were the second highest source of Zinc release -Reached 0.13 mg/L (16 mg/m2) after long time exposure -Higher losses at pH 5 • Concrete and Plastic materials were the lowest source of zinc

  11. For galvanized steel materials zinc release was greater and faster at higher pH conditions during long exposure • After long-time exposure (90 mg/L; 4200 mg/m2 at pH 8)

  12. Concrete and Galvanized Steel Materials • No metals were detected with concrete pipes until 2 months

  13. Aluminum and Copper Materials

  14. Toxicity • At higher pH conditions • Concrete and Vinyl materials – least toxic • Copper and PVC – most toxic

  15. Conclusions • The greatest source of lead, zinc, and iron were galvanized steel materials, while copper materials were the highest source of copper. • Lead and Zinc release was detected during both short and long exposure . • During short exposure time copper releases were detected only for copper materials at both low and high pH • Copper and aluminum materials had the highest toxicity, while concrete materials were least toxic.

  16. References • Clark, Shirley E., Long Brett V., Siu Christina Y.S., Spicher Julia, Steele Kelly A., 2008 Runoff Quality from Roofing during Early Life. Water Environment Federation. • Lasheen M.R., C.M. Sharaby, N.G. El-Kholy, I. Y. Elsherif, S. T. El-Wakeel, 2008. Factors influencing lead and iron release from some Egyptian drinking water pipes. Journal of Hazardous Materials. 160 (2008) 675-680 • http://www.slatetileroofing.com/gallery/images/allred_roof_systems_gallery/copper/copper_gutters.jpg • http://www.guttersupply.com/file_area/public/categories/ImageUrl_1202397996_9640.jpg Acknowledgements • NSF EPSCoR

  17. Thank you!

More Related