1 / 21

LED photobiology

LED photobiology. János Schanda University of Pannonia Virtual Environment and Imaging Technologies Laboratory based on the paper by W. Halbbritter , W Horak and J Horak :. CIE Conference Vienna , 2010. Overview. Introduction Optical radiation LED emission spectra

bella
Download Presentation

LED photobiology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. LED photobiology JánosSchanda University of Pannonia Virtual Environment and Imaging Technologies Laboratory basedonthepaperby W. Halbbritter, W Horak and J Horak: CIE ConferenceVienna, 2010

  2. Overview • Introduction • Opticalradiation • LED emissionspectra • Human eyetransmission • Opticalhazards • Conclusions and summary

  3. Optical radiaton - photobiology • UltraViolet radiation: actinic radiation • UV-A: 315 m – 400 nm • UV-B: 280 nm – 315 nm • UV-C: 100 nm – 280 nm • Visible radiation: 380 nm – 780 nm • Infrared radiation • IR-A: 780 nm – 1400 nm • IR-B: 1.4 mm – 3 mm • IR-C: 3 mm – 1 mm

  4. LED emission • LEDs now available from 245 nm • Visible wavelengths + white • Near infrared – optical communication • LED spectrum bandwidth: 20 nm – 40 nm

  5. Penetration of UV radiationintotheeye AfterSliney DH, Wolbarsht ML. Safety with Lasers and Other Optical Sources. (New York: Plenum Publishing Corp); 1980.

  6. Ocularhazards • Photokeratitis, photo-conjuntivitis • Redening of theeye, disaperswithin 24 – 48 hours

  7. Optical hazards • Chemical – biochemical hazards • Photon energy in the range of energy of chemical bonds • Skin damages • Ocular damages • Thermal hazards • Skin damages • Ocular damages

  8. Eyehazardspectraafter CIE TC 6-55 draftreport

  9. Lampriskcathegories-acceptanceangles Eyemovement, timedependentsmeareffecttakenintoconsideration

  10. Lampsafetymeasurementconditionsof • Measurementdistance: • Minimum viewingdistance: 200 mm • GSL lamps: 500 mm • Measurementaperture: • Maximum human pupilsize: 7 mm • Sourcesize and angularsubtense: • Thermalretinalhazarddependsonirradiatedsurface (heat flow) • 380nm-1400nm: eyefocuses- minimum angularsubtense: amin=1.7mrad • Maximalangularsubtense: amax=100mrad

  11. „Physiological” radiance/irradiance and timeaverage • Radianceweightedaccordingtotheactionspectum of thegivenhazard • Thermaleffects: importanttheheatconduction of thetissueawayfromtheirradiation site, theirradiatedtissuevolume and theirradiance – local burn. • Size of irradiationimportan!, irradiancedependent, W/m2. • Photochemicaleffects: strongwavelengthdependence, followsBunsen-Roscowlaw. • Radiantexposure, J/m2, dependence.

  12. Ocularhazards • Radiationbetween 380 nm and 1400 nm reachesthe retina. • Lightsourcefocusedon retina • Retinalirradiance: Er= pLstde2/(4f 2) where: • Er: retinalirradiance • L s: sourceradiance • f: : effectivefocallength of eye • De : pupildiameter • t : transmittance of ocularmedia • A worst-caseassumption is: Er= 0.12 L s • Thislineardependence of retinalirradianceofsourceradiancebreaks down forsmallsources, lasers. • Thusretinalsafetylimitsfor 300/380 nm – 1400 nm aregivenin W/m2or J/m2

  13. Lampsafetyregulationmeasurements • Physiological (timeintegrated) radiance:Radiantpowerpassingthrough a definedaperture stop (pupil) at a defineddistance • ApertureareadefinessolidcollectionangleW(sr) and measurementarea: field of view:FOV (m2), measuredbytheacceptanceangle: g

  14. Time dependence of acceptanceangleto be used • Duetoeyemoventsforshortdurationssmallacceptanceangleshaveto be chosen • FOV can be over- orunder-filled

  15. Productsafety standard conditions • Measurementdistance • 200 mm meas.distance • (GSLs: 500 lxdistance) • Measurementaperture: maximum pupilsize, 7 mm diameter • Sourcesize & angularsubtense • Thermalhazardsource image sizedependent: • = 2 arctan(apparentsourcesize/2 sourcedistance) • Butamin=1.7mrad, amax=100 mrad • Apparentsourceposition

  16. Productsafetyissues • CIE S 009/IEC 62471: Photobiological Safety of Lamps and Lamp Systems • Lamp and lampsystemmanufacturerrequirements • Ifapplicable FOV<sourcearea (overfilled)-> ->LED radiancedata hold forluminaire • Ifunderfilled, multiplesmallsourcescanfallintothe FOV area and averagedradiancewill sum up! • Forsuchapplicationsthetruweightedradiance of thesource is needed, acceptanceangleshouldnot be smallerthan 1.7 mrad. • But LED assembieswithbeamshapingopticshavetobemeasuredaccordingtothe standard. • P-LEDs(and blueLEDs) mightexceedthelow-riskgroup

  17. Example: p-LED, individual LED

  18. LED-lampbasedon LED componentevaluation

  19. CIE S009/IEC62471 requirements, 1

  20. CIE S009/IEC62471 requirements, 2

  21. Thanks for your kind attention!

More Related