1 / 15

Power Plant Construction and QA/QC Chapter 6 – Welding, Procedure and Operator Qualification

Engineering Technology Division. Power Plant Construction and QA/QC Chapter 6 – Welding, Procedure and Operator Qualification. Chapter 6 – Welding, Procedure and Operator Qualification. Overview. All Pressure Vessel Welding Requires Welding Procedures

baxter
Download Presentation

Power Plant Construction and QA/QC Chapter 6 – Welding, Procedure and Operator Qualification

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Engineering Technology Division Power Plant Construction and QA/QC Chapter 6 – Welding, Procedure and Operator Qualification

  2. Chapter 6 – Welding, Procedure and Operator Qualification Overview • All Pressure Vessel Welding Requires Welding Procedures • All Pressure Vessel Welding Requires Welder Qualification • ASME Code Requires Procedure and Welder Qualification • Authorized Inspector Must Witness Procedure and Welder Quals • Authorized Inspector Must Witness a Sample of the Weld NDE

  3. Chapter 6 – Welding, Procedure and Operator Qualification Welding Processes

  4. Chapter 6 – Welding, Procedure and Operator Qualification Welding Basics • Welding is the process of joining two materials using an electric arc • Primary Welding Types • “Stick” – SMAW – Shielded Metal Arc Welding • “MIG” – GMAW – Gas Metal Arc Welding • “TIG” – GTAW – Gas Tungsten Arc Welding • “Sub Arc” – SAW – Submerged Arc Welding • Six Welding Positions – Flat, Horizontal, Vertical, Overhead, Horizontal Round and Inclined • Brazing and Soldering – Non Pressure Boundary

  5. Chapter 6 – Welding, Procedure and Operator Qualification Welding Positions

  6. Chapter 6 – Welding, Procedure and Operator Qualification SMAW Welding Basics • Flux Covered Rod • Negative Polarity • DC Voltage • Excellent Access • Wide Material Use

  7. Chapter 6 – Welding, Procedure and Operator Qualification GMAW Welding Basics • Gas Cover • Positive Polarity • DC Voltage • Thin Materials • Wide Material Use • Fast Process

  8. Chapter 6 – Welding, Procedure and Operator Qualification GTAW Welding Basics • Gas Cover • Negative Polarity • AC or DC Voltage • Wide Material Use • Manual Process

  9. Chapter 6 – Welding, Procedure and Operator Qualification SAW Welding Basics • Powder Flux • Negative Polarity • DC Voltage • Thick Materials • Fast Deposition

  10. Chapter 6 – Welding, Procedure and Operator Qualification Welding Procedure WPS – Welding Procedure Specifications PQR – Procedure Qualification Records WQ – Welder Qualification Records These items are based on a joint and material design by a Welding Engineer. NDE and bend testing (DE) is used to verify procedure compliance.

  11. Chapter 6 – Welding, Procedure and Operator Qualification Welding Symbols

  12. Chapter 6 – Welding, Procedure and Operator Qualification Welding Symbols

  13. Chapter 6 – Welding, Procedure and Operator Qualification Welding Symbols

  14. Chapter 6 – Welding, Procedure and Operator Qualification Destructive Testing Tensile Bend Charpy V Notch

  15. Chapter 6 – Welding, Procedure and Operator Qualification Questions?

More Related