Installation Manual & User Guide (KV)

1. Installation Manual & User Guide I. Product Overview Thank you for choosing our faucet product. We are committed to providing you with high-quality, easy-to-operate, comfortable, and durable products. This manual aims to guide you in the correct installation, use, and maintenance of the faucet to ensure its optimal performance and extended service life. II. Installation Steps 1. Before installation, confirm that the water inlet pipeline and angle valve are properly installed and have been flushed with water to ensure that there are no impurities in the pipeline. 2. We strongly recommend the fitting of isolation valves to the inlet feeds for ease of future maintenance. Any warranty claim on the tap will be handled on the basis that isolating valves have been fitted. 3. Prepare the necessary installation tools and follow the steps in the product manual or installation drawing for installation. Be careful not to damage the faucet or installation hole during the installation process. 4. Connect water supply to the inlet connector The HOT supply should always be connected to the LH side when viewing the fitting from the front. III. Usage Instructions 1. To turn on the faucet, gently rotate the handle or press the sensor switch, and the water will flow out. 2. Adjust the faucet handle to control the flow rate and temperature of the water. 3. After use, please ensure that the faucet is closed to avoid wasting water resources. 4. Always before the first use and when a fitting has not been used for a prolonged period, you should let rinse out a larger amount of water (water stagnation) before drinking water is taken! IV. Maintenance and Care 1. Regularly clean the surface of the faucet to remove water stains and dirt. You can use a gentle cleanser and a soft cloth for cleaning. Avoid using hard objects or chemical cleansers that may scratch the surface. Surface damages can be expected especially in colored fittings for inobservance of care instructions. Warranty claims will not be asserted. 2. Regularly check if the fasteners of the faucet are loose, and tighten them promptly if any loosening is found. 3. Please do not expose the faucet to high temperatures or extremely cold environments to avoid affecting its normal operation and lifespan. 4. Please do not use hard objects or sharp items to hit the faucet to prevent scratching or damaging the surface. 5. Follow the instructions in the product manual during installation and use to ensure safe operation. We wish you a pleasant experience! REV:KV03172024