1 / 20

Temperature Measurement using sensors and signal conditioning

Temperature Measurement using sensors and signal conditioning. Michael Mansell Ken Dudeck (Faculty Sponsor). Topics of Discussion. Types of temperature sensors The CK101 LCD Temperature Meter Our circuit design. Types of temperature sensors. RTD (Resistance Temperature Detector)

baruch
Download Presentation

Temperature Measurement using sensors and signal conditioning

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Temperature Measurement using sensors and signal conditioning Michael Mansell Ken Dudeck (Faculty Sponsor)

  2. Topics of Discussion • Types of temperature sensors • The CK101 LCD Temperature Meter • Our circuit design

  3. Types of temperature sensors • RTD (Resistance Temperature Detector) • Thermistor • Thermocouple

  4. RTD, the basics • How it works: • Utilizes the fact that resistance of a metal changes with temperature. • Make up: • Traditionally made up of platinum, nickel, iron or copper wound around an insulator. • Temperature range: • From about -196°C to 482°C. Thin Film RTD

  5. Advantages: Stable Very accurate Change in resistance is linear Disadvantages: Expensive Current source required Small change in resistance Self heating Less rugged than thermocouples. RTD Advantages and Disadvantages

  6. Thermistor, the basics of • How it works: • Like the RTD a thermistor uses the fact that resistance of a metal changes with temperature. • Make up: • Generally made up of semiconductor materials • Temperature Range: • About -45°C - 150°C Thermistor

  7. Advantages: Very sensitive (has the largest output change from input temperature) Quick response More accurate than RTD and Thermocouples Disadvantages: Output is a non-linear function Limited temperature range. Require a current source Self heating Fragile Thermistor Advantages and Disadvantages

  8. Thermocouple, some more basics • How it works: • Made up of two different metals joined at one end to produce a small voltage at a given temperature. • Make up: • Made of up two different metals. Ex: A type J is made up of Iron and Constantan. • Temperature Range • Type J: 0°C to 750°C A few Thermocouples

  9. Advantages: Self Powered (does not require a current or voltage source) Rugged Inexpensive Simple Disadvantages: Extremely Low Voltage output (mV) Not very stable Needs a reference point Thermocouple Advantages and Disadvantages

  10. Lets Experiment! • In lab a RTD, thermistor, and thermocouple were placed in a beaker of 750mL of water and readings were taken from 19°C to 80°C. • The next two slides show the results.

  11. The Data (some of it)

  12. A little easier to read

  13. First test subject (The Kit CK101) • Basically the same idea as our circuit design, but easier? • How it works • Why it did not work CK101 LCD Temperature Sensor

  14. How it works and what went wrong • Uses transistors instead of the other discussed sensor types. • Uses the ICL 7106 chip • Problems: • Possible Bad chip • Capacitors not soldered in properly. • Cold solder joins leading to bad connections

  15. Our design It works!

  16. Picture

  17. Another Picture

  18. Circuit Diagram

  19. Questions or Comments?

  20. My Sources • Omega.com (Info on RTDs and Thermistors) http://www.omega.com/ • United Electric Controls (Thermocouple, RTD, and Thermistor info) http://www.ueonline.com/ • Intersil (ICL 7106 Chip reference) http://www.intersil.com/

More Related