A Student, Owner and Operator

1. Microscapes Inc. There’s no job to small” A Student, Owner and Operator

2. Clients Room of Service with Proposed Plant Design Key • A – Ficus benjamina ‘nitida’ • B – Dracaena deremensis • C – Agtaonema sp. • D – Ficus pumila • E – Spathiphyllum wallisii • - Existing house lamps D B C B E A

3. Current Conditions • Excess moisture accumulates from use of the adjoining kitchen due to poor ventilation • Ave. foot candles (fc) during daylight hours • A – 6.3fc • B & C – 10.42fc • D – 55.04fc • E – 6.32fc

4. Preparation • Client will install a shelf on wall behind the couch about 3 feet below ceiling level and 1.5 feet in depth • Install Grow-lux bulbs above areas labeled A, E, and B-C-B • Install a Hepa-filter to clean and circulate the air • Water test to determine if a filter is necessary and/or how fertilizer application needs to be curtailed according to water quality

5. Plant Placement B C B E D A

6. Plant “A” Characteristics Ficus benjamina (Ficus benjamina ‘Nitida’) Temp: warm – hot (60˚F- >72˚F) Light requirements: Medium – High (70 fc - >230 fc) Size: medium, (4ft – 8ft), using a specimen in the middle of this range Into a 14” terra cotta clay planter

7. Plant “B” Characteristics • Janet Craig Dracaena (Dracaena deremensis ‘Janet Craig’) • Temp: cool – hot (45˚F - >72˚F) • Light requirements: Low – High (<23fc - >230fc) • Size:small (8in – 4Ft), using the smaller specimen of this range • Into a 6” terra cotta planter

8. Plant “C” Characteristics • Creeping evergreen (Aglaonema sp.) • Temp: cool – hot (45˚F - 72˚F • Light requirements: low – medium (<23fc - 140fc) • Size: small (8in – 4Ft), using the smaller specimen in this range • Into a 6’’ terra cotta clay planter

9. Plant “D” Characteristics • Creeping fig (Ficus Pumila) • Temp: cool – hot (45˚F - >72 ˚F) • Light requirements: Low – High (<23 fc - >230 fc) • Size: small (8 in – 4ft), using the smaller specimen in this range • Into a 30” clay window trough

10. Plant “E” Characteristics • White flag, Peace lily (Spathiphyllum wallissi) • Temp: warm – hot (60˚F - >72˚F) • Light requirements: Low – Medium (<23fc - 140fc) • Size:small (8in – 4ft), using the larger specimen in this range • Into a 10’’ terra cotta clay pot

11. Outline of Installation Costs… *These are wholesale prices. ** Two workers. One working at $8.00 and the other working at 7.00

12. Installation Costs

13. Maintenance Schedule and Costs

14. Guarantees • 100% satisfaction guaranteed or Microscapes Inc. will refund your last two monthly payments. If contract is less than two months before termination than we will refund all of your monthly payments. This refund does not include installation and maintenance costs up to the point of contract termination. • Replacement • Microscapes will replace any plants that dies under our care. This does not include the death of plant due to the actions of a non-microscape team member. For instance gas leaks, plant exposure to foreign substances introduced by a non-Microscape member, effects of pets, improper pruning or watering by a non-Microscape member, etc… • Cancellation Rights • The contract can be terminated by the customer in the case of dissatisfaction • Microscapes also has the right to cancel their services should it be in the best interest of the company • Fees • By signing to this one-year contract the client agrees to pay for our monthly fee of $60.00 in addition to installation and maintenance costs as determined by the tables in this contract, cost of water test, filter, and grow-lux bulb costs and installation.

15. I,_________ on this date________ hereby agree to the terms presented in this contract and agree to pay Microspaces Inc. the below fee for one year of service unless contract is otherwise terminated by the concurrence of both parties. Itinerated fees for 12 months of service: • $264.93 – Installation costs • $130.29 – Maintenance costs • $720.00 - 60.00 x 12 months Total: $1115.22