WATER TANK AND IMMERSION HEATER INSTALLATION AND REPAIR

1. WATER TANK AND IMMERSION HEATER INSTALLATION AND REPAIR WATER TANK AND IMMERSION HEATER INSTALLATION AND REPAIR Immersion heaters are among the most efficient devices aimed at heating oil products and various liquids that are stored for a long time in reservoir tanks. In addition to petroleum products in the form of bitumen, immersion heaters have proven themselves well in uniform heating of water and various oily liquids. To safely install and repair immersion heaters, it is necessary not only to comply with all the rules during its production, but you must ensure that you use high-quality raw materials and comply with technical characteristics to correctly install the water tank. Water Water tank installation tank installation First option. If the water supply is organised from an autonomous source, there is a pump or station on the site. Therefore, considering its capacity, it is advisable to place the tank in a room where the temperature does not drop below zero. This will eliminate the need to insulate the storage tank for the period of cold weather. An additional plus is a reduction in installation costs, since less pipes are needed to connect to the system. Second option. The same, but with central water supply. To complete the circuit, you need to purchase a low-power pump. In the event of an accident on the highway, it will already pump water into the system from the immersion heat Third option. Installation in the ground. This solution removes some problems but creates several others. It will be necessary to equip an analogue of a caisson for a pumping station, only larger in size. However, in the pit, you will have to deal with maintenance and repair of the storage tank, so make sure that you have free space. Additionally: insulate the tank, protect against seasonal soil movements. Such installation technology will be expensive, but the plus is obvious - the tank will not interfere in the house or on the territory. If for some reason the pumping device cannot be used, then it will be necessary to organise a backup water supply by gravity. In this case, the storage tank will not provide a large pressure, but the house will not remain without life-giving moisture. Water tank repair Water tank repair

2. •For the safe operation of the immersion heater, its installation must be carried out by specialists with the relevant qualifications •Connecting the heater to the network •It is not allowed to connect the heaters to the network with an insufficient amount of liquid to avoid overheating of the heating wire. •If any damage is found to the heating device, it must not be used. •Installation and repair work of the heater must be completely disconnected from the mains. Steel and reinforced concrete tanks that have been in operation for a long period of time require systematic monitoring of their condition and the organisation of planned repairs, in accordance with safety rules and industry standards. Each enterprise is faced with water tank repair because reinforced concrete and steel tanks are subject to wear and corrosion, which reduces the reliability of their structures. To prevent the occurrence of abnormal and emergency situations, failure of capacitive equipment and maintenance of water tanks in working order, it is recommended to carry out: •preventive maintenance and water tank repair •cleaning tanks from water, reagents, chemicals, dust and dirt •repair of metal and reinforced concrete tanks using polymer lining is a modern, durable and cost-effective solution Hire certified tradesmen through Bag a Builder. Contact Us: 86-90 Paul St, London EC2A 4NE, UK support@bagabuilder.co.uk +44 (0) 2071999801