1 / 32

Manufacturing Rounded Shapes

Manufacturing Rounded Shapes. Manufacturing Processes. Examples of Lathed Parts. Outline. Types of Processes Turning Parameters Geometry Material Removal Rate Forces Lathe Components Lathe Attachments Design Considerations Types of Lathes. Types of Processes. Turning Facing

azizi
Download Presentation

Manufacturing Rounded Shapes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ManufacturingRounded Shapes Manufacturing Processes

  2. Examples of Lathed Parts

  3. Outline • Types of Processes • Turning Parameters • Geometry • Material Removal Rate • Forces • Lathe Components • Lathe Attachments • Design Considerations • Types of Lathes

  4. Types of Processes • Turning • Facing • Form Tools • Boring • Drilling • Parting • Threading • Knurling

  5. Various Turning Operations

  6. Turning Operation

  7. Turning Parameters • Geometry • side rake angle • back rake angle • relief angles • cutting-edge angles • nose radius • Forces in Turning • cutting force • thrust force These forces cannot be calculated accurately; they are determined by experiments • Material Removal Rate

  8. Lathe Tool Parameters

  9. Lathe Tools

  10. Lathe Tool Inserts

  11. Lathe Tool Holders

  12. Lathe Feedand Speed V = πDN/12 V = cutting speed in ft/min; Velocity at which the tool head moves along the workpiece surface D = diameter of the rotating tool or rotating workpiece N = RPM of the rotating tool or rotating workpiece Feeds for a lathe are listed as in/rev or m/rev. Multiply these by the RPM to obtain the feed in in/min or m/min.

  13. Lathe Feedand Speed Example: Work Material: Aluminum Tool Material: High Speed Steel Workpiece Diameter: 3.375 in Recommended Cutting Speed: 600 ft/min N = 12V/πD N=12*600/(π*3.375) =679.2 RPM The closest available speed on the lathe, without exceeding this value, is 630 RPM so this value should be used. Recommended Feed for HSS/aluminum = .01-.02 in/rev f = (.01-.02)*630 RPM = 6.3-12.4 in/min

  14. Material Removal Rate Material Removal Rate (MRR) is the volume of workpiece material removed per unit time MRR = πDavgdf N Davg = average diameter =(Doriginal + Dfinal)/2 = (Doriginal - d) d = depth of cut f = feed, in/rev or mm/rev N = RPM

  15. Material Removal Rate Example: Original Diameter = 3.375 in RPM = 630 RPM Feed = .01 in/rev Depth of cut = .02 in MRR = πDavgdfN Davg = 3.375 - .02 = 3.355 in MRR = π*3.355*.02*.01*630 = 1.33 in3/min

  16. Lathe Components • Bed • Carriage • Headstock • Tailstock • dead center • live center • Feed Rod and Lead Screw

  17. Lathe Components

  18. Example of a Lathe

  19. Centers

  20. Lathe Attachments • Chucks • Collets • Face Plates • Mandrels • Accessories

  21. Chucks

  22. Lathe Attachments

  23. Collets

  24. Mandrels

  25. Design Considerations Design parts so they can be fixtured or clamped easily Design the part so that tolerances of the dimensions and finishes are as large as possible Avoid tapers, sharp corners, and large variations in the dimensions of the part Produce blanks as close to the final design as possible Design the workpiece so that the cutting tools can move across it without obstructions Standard cutting tools should be able to machine the design Select materials that can be machined properly

  26. Types of Lathes • Tracer Lathes • Automatic Lathes • Automatic Bar Machines • Turret Lathes • Computerized Lathes

  27. Turret LatheOperations

  28. Turret Lathes andComputerized Lathes

  29. Example of a Turret Lathe

  30. Vertical Turret Lathe

  31. Summary Various processes are available to create different shapes and surface effects Several different fixtures exist to hold a workpiece in a lathe A workable design must be considered in order to allow efficient machining

  32. The End ))))))))))))))))))))))))

More Related